WildCat Ultra Minarelli 6hp Race engine!

Take this motor apart and look inside of It. Is Californiamotorbikes.com any good?
So We are back at some Motor bicycles again. Its been long over due. I appreciate you guys patients!
Next Video will be The full build.
Welcome To ColdStart Garage. We have a great time on this channel!
How to reach me!
[e-mail]
Instagram @ coldstart The link is in my about me tab
Thanks for watching ColdStart Garage!
#backyardmechanic #coldstart #mechanical #automobile #mechanic #twostroke #2stroke #2smoke #minarelli

[@Cruise-InTV]

Those are the best engines for sure! Used them six years now ❤😊

[@Cruise-InTV]

Stock kits get me 38-42mph I’m 200lbs

[@ColdStartGarage]

My old set up. The one that was stolen.. 35mph. It was a chinadoll

[@ColdStartGarage]

I am also 200lbs.

[@user-ip4bp3sq4n]

I had my front fender come loose. Ended up in an ambulance and was pretty banged up my kneck is still sprained. Remove fenders !

[@ColdStartGarage]

I huck all my fenders in the weeds.

[@user-ip4bp3sq4n]

@@ColdStartGarage definitely a smart move!. can't wait to see a video of the Chinarelli running. Keep up the solid content I subbed just a few minutes into the video.

[@ColdStartGarage]

Took a bit of time to scrape up some cash and work through chores. Hopefully I’ll get her in motion asap! Thanks for the sub

[@kjsmolik]

Bro if you pull in the clutch lever then you can remove the flower nut with your fingers . And its a stock clutch

[@ColdStartGarage]

Good to know. It’s prolly why the clutch doesn’t release right now 🤣

[@Bobs-yer-uncle]

Just look at it 😂 love that guy 😅

[@JeffWalters-ln1es]

Mines on the way shortly lol😊

[@kjsmolik]

Not a race engine. Its an exact copy of our minarelli but ours are 8hp.

[@ColdStartGarage]

Must be a marketing gimmick then. Either way I’m gonna treat it like a race engine! 🏁🏁🤘🏻

[@Bobs-yer-uncle]

I wish it was an exact copy Smoliks engine is way better built but you pay for it but for $200 it's a decent start

[@mbrrideitlikeyoustoleit8436]

Kurt these are just as good as what you sale yes you got to take it apart and do a few things but yes Just as good as what you sale. For $300 less. I have one of these wildcats bottom ends but I used your short rod spacer and your intake with the naraku cylinder. Way before California sold these. Please tell me what makes them not as good? Yes I would rather have a long rod crank then a short rod.

[@leonardarola]

16hp out of the box

[@kjsmolik]

@@leonardarola not even close

[@wrenchturner150]

Good to see ya back bud, hope all is well..

[@B0r3dsBikes]

My man got the 4k camera now, Ok my man lets get it guey

[@ColdStartGarage]

iPhone is 4K… I’m feeling that my movies is white washed now 🤣. I have to figure that out

[@TA-xj5we]

👍🐿😂 p.s. gonna wanna put a "reed-valve" with that windowed piston.

[@ColdStartGarage]

It came with a reed valve. Cutest little valve ever

[@TA-xj5we]

@@ColdStartGarage lmao, ok, good!

[@georgebell8826]

I like those clutch pads better than the red ones. And they are the better ones.. should do a video about the new avenger 85 . 53mph out of the box.. or try out one of kens chainsaw builds

[@ColdStartGarage]

I’d love to. I’m still struggling with my Minarelli build🤣 finances, hunting and chores. Got right in the way. And it’s dark by 5. Still making progress. I’m just trying to have a start to finish fresh build for you guys. Motor bicycle and KZbin as a hobby. Holy Christ I’m going bankrupt

[@georgebell8826]

@@ColdStartGarage lol yea it's kinda an expensive hobby once you get into it . especially after you get the need for speed lol

[@ColdStartGarage]

Id love to get my hands on an avenger, but at this moment im fresh out of money. Minarelli tapped me out! But its on my list of contents

[@ArthurSperotto]

I have a hunch that you watch Vice Grip Garage lol

[@ColdStartGarage]

My main inspiration to KZbin is Wes from complete toilet garage. I have not watched vicegrip since he started putting out 2 hour movies. I ain’t got time for that 🤣 Either way thanks for the view and here is a link to my buddies channel youtube.com/@CompleteToiletGarage?si=9_EPmPIWzrkT7P9P

[@chrismayberry4315]

Should be just quick enough to hurt yourselve lol i bet youd beat rampy out of the hole haha

[@ColdStartGarage]

Rampy saved my ass when the ole Honda let me down at work. Wes saved the day.

[@laynesworldchannel2437]

What you called the cdi is really the magneto an it does have extra copper wound insode than the old stock one. Ive used California motorbikes for 9 years now there motors rock

[@ColdStartGarage]

I mixed up my words and such. Just like in real life: I like California motorbikes so far as well. Pretty happy with em

[@mtgreen88]

Chinarelli is a stock 66cc cylinder cut at the intake like a minarelli. Smolik makes them.

[@skipstalforce]

Wow that gas tank is trash oh well now you have a good reason to buy a fancy frame

[@theLyzhendricks]

Couldent imagine justifying buying a 800$ frame cause ur 15$ gas tank is damaged

[@ColdStartGarage]

I’m broke… so justifying it is just a pipe dream

[@4514rooster]

I put multiple AirTags on everything I own

[@midge753]

i ordered the same motor from California motorbikes and im wondering what jets ended up working out for you?

[@ColdStartGarage]

This is what I ordered from eBay. I have not used them yet. But once it warms up I’ll be making it a touch fatter

[@ColdStartGarage]

www.ebay.com/itm/374264805585?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=xgrjar4bqx2&sssrc=4429486&ssuid=H6LwYMCyReu&var=&widget_ver=artemis&media=COPY

[@vanilladiiip]

Did u notice the needle bearing on the piston have alot of side to side play?

[@ColdStartGarage]

I had this motor apart 3 separate times. I wasn’t looking for side to side play.. but I’d think I’d notice it if it was sloppy. So no I did not notice 🤣

[@gnorman-ct2lt]

Smolik performance is where you go for Minarellis or go max

[@ColdStartGarage]

I tried California motorbikes out this time. So far so good. But there is room for improvement for sure

[@SabreCycles]

Anyone know who Tim Conway was? If you want to see hear him again, turn the playback speed up to 1.25. Enjoy a good laugh. lol New subscriber because of that. 🙂

[@ColdStartGarage]

I remind you of Tim Conway? When my content is sped up? My dang ole retention rate is gonna suffer now 🤣 🤘🏻🏁🏁🏁

[@SabreCycles]

@@ColdStartGarage lol

[@B0r3dsBikes]

so thats a minerelli a chinarelli would be like your zeda80 cylinder with a mineralli style reed smolik preformance sells them

[@ColdStartGarage]

So a chinarelli would be a chinadoll cylinder with a reed? Thanks for the input. I would not piece that together on my own. My brain was chinadoll bottom end with an Italian cylinder… but I’ve been wrong often!

[@georgebell8826]

A "chinarelli" is the "dio" kets you find online has the big block of metal that the intake and reeds bolt up to

[@georgebell8826]

I'm waiting to see you're next video hopefully see it run . And see how fast it is have been thinking about getting one ... At the moment my china doll will do 46mph .. and I have a 395xp chainsaw hybrid

[@ColdStartGarage]

I don’t have a frame yet. But I’ll be looking soon.

[@kjsmolik]

​@georgebell8826 chinarelli is NOT a dio . Not even close. Chinarelli is made by Smolik performance and it uses a minarelli intake nit a dio

[@AceBase5]

What’s the difference between this motor and the 5hp wildcat they offer with a kit

[@ColdStartGarage]

I don’t think Cmb offer the minarelli as a full kit. I just looked briefly and did not see it. Minarelli is its own niche all in its self. I have not tried the other engines.. yet. So I don’t have an opinion on them. Facebook has great forums and much more knowledgeable people. Search Kurt Smolik. He knows a thing or two bout a thing or two about! This one you have to source all the extras. And they add up. I have the full build in my playlist if you care to scrub through. 🤘🏻🏁🏁🏁

[@ColdStartGarage]

I know that’s was little to no help. Sorry about my knowledge gaps

[@AceBase5]

@@ColdStartGarage no problem thanks for the response I’m just trying to figure out how much I’ll have to spend all together to get it running since I have a bike V2 frame

[@ColdStartGarage]

@AceBase5 I spent just about 800 for bike engine and all the parts. But that’s without know much about minarelli to start with. I may be able to do it cheaper now I know a single thing bout em now 🤣

[@djodjodubois9458]

Please activate the subtitles in French..thank you

[@ColdStartGarage]

I’m so sorry. I’ll look into that asap!

[@ColdStartGarage]

I had no idea I had to turn that on for you. I’ll be better about that

[@SuperTrikeBicycle.]

Top speed?

[@ColdStartGarage]

I don’t know yet. I will know soon. Wrapping up the project soon. With a fresh video!

[@leonardarola]

Throw in a 36t sprocket.