Our DIY Tiny Kitchen ISN'T Going Perfect [RV Renovation]

[@roadstraveledphotography8440]

If y’all decide to sale this RV, I’ll be your buyer. I’ve watched it be built with love, hardwork and dedication. Love following you kids

[@JamesGrudziecke]

I'm an old retired guy, and I want to tell you guys that I enjoy your partnership and how you work together. I know it's not easy, but you look like you enjoy the labor you put in to renovate the rv. Keep up the good times ❤

[@rkjoat]

I wanted to comment on your cutting board height to counter top issue. I would suggest rubber bumpers on the four corners. It will also help securing the cutting board while using it on the counter.

[@rkjoat]

👏

[@viewer5432]

Came to find this comment. 👍🏼

[@Brighgn-qp7ce]

Or find some scrap wood or countertop to cut long pieces at the height you need, to raise it, and protect the edges from water splash.

[@CathyPinAZ]

Considering I know NOTHING about building cabinetry, I think you two have done a great job! Lots of adjusting and figuring things out along the way…thank goodness you work well so together. 👏👏👏

[@derkvanrijsewijk1471]

In the future, you should have put the edge lament of first and router trimmed it. Then put the top on a router trimmed it. This would make the top cover the side edge and block water from ever getting between the edge and the top. It also reduces the chance of chipping the top of the edge when you drop a pan on the counter.❤

[@Gunner521]

When laminating a countertop, you should put the small side pieces on before the top laminate. That way, the top will hide the seam on the side pieces.

[@walterrafolski5662]

Craig, you’ve got a keeper in that woman! She’s almost as good as you at the finish work! Great video we are really enjoying watching this transformation!😊

[@aceofspades1849]

To bring that cutting board level with your counter I’d recommend a few peel and stick rubber pieces under your cutting board to rest on the sink. And as a added bonus it makes the cutting board non slip

[@paulmcdonald3570]

Pointer for your next laminate job. Install all of your edge banding first and router edges flush. Then install the top sheet of laminate. The reasoning behind it is this, say you drag something off of the counter it tends to pull on the edges or chip the edges. If the laminate top is overlapping your edge banding you have negated this from happening. I understand it’s your first go round and you’re doing great. Just trying to pass on what I’ve learned. Another tip is to install dowel rod on the glued mdf then you can line up your laminate on all edges then pull out your dowel rod one by one as you adhere the laminate to the mdf. This way you’re under control when bonding the two materials together. It would keep you from having that oops moment that you ran into when you yelled for help😂😂😂.very fun to watch!!!!

[@wildrvlife]

such good tips, thank you! We'll have to give that a try next time! We're definitely still learning, and I did not expect that instant glue moment I had 😂😂 I cracked up at myself watching that footage back

[@maxsmart8786]

4:40 grill's on fire 🔥

[@DoinZip]

Great job. But I think using an under mount sink with laminate is gonna a problem.

[@clintcartee9620]

Wondering where you all will store all them tools once done... I have space in my garage. Just saying

[@tkilg7169]

Pretty good for a first cabinet. If you build another, make the face frame out of solid wood, cut into the proper pieces to pocket hole together, and pocket hole to the cabinet carcass. Plywood edges of the carcass will be hidden and the face frame edges will look nice. Also, if you ever need to access items within that space, you can unscrew pocket screws for each cross piece to have a larger hole to reach into and work on items within that space.

[@timsforcoffee]

I didn't watch the episode yet, but I've watched the previous episodes. I like your attitude. Do a bit of research. Go for it. Learn from your mistakes. Sure it may not be perfect, but it will be WAY better than it was and you have the satisfaction of making it YOUR RV. I like how previously you mentioned that this is "not a how to" video, rather it's a "how we did it" video. Thanks for sharing. It's fun watching you squirm through the build, but you keep pushing forward.

[@jerryskaggs6434]

If you have more drawers to mount there are mounting kits so everything is at proper angle and square. I learned the hard way. Keep on trucking ✌

[@RV_twidlr]

Counter tops should always be made with 3/4 inch plywood on all surfaces that could get wet. A second thin strip is added to the outside edge that would give you a faux 1.5" thickness on the outside edge. You then laminate the top and front edge of the countertop to give a finished look. It will never swell if water does leak by and last forever - I did the two counter tops in our home bathrooms 20 years ago and to date - No issues. I used 3/4 in plywood for the 3" counter backsplash as well. Otherwise it looks great!

[@mooreroadstotravelon3]

You two young kids are so much fun to watch! Thanks for sharing your adventures with us. Can't wait to see how this remodel comes out. Have a good day from Laurie and Rick

[@PhillyGirl_70]

Great job Craig and Victoria...P.S. Thanks for the laughs. You both make your videos fun😊❤

[@Dana-.-]

It’s coming together! 👏 The laminate pattern is spot on! I remember that pattern quite well! Most folks had that in white, rust or red coloring. Use metal trim and you will have a 1970’s table!

[@johnspoentgen9489]

Im really enjoying and looking forward to this series. I dont think my wife and I would last more than 10min doing construction work together.

[@williambingham2459]

You guys just amaze me as you tackle all facets of cabinetry. Pat yourselves on the back. You did great for first-timers. 😊 I do prefer, though, 3/4 inch material for sides/fronts on frameless cabinets. But, hey, you are keeping costs down as much as possible.

[@Jshu7676]

Just put some rubber vibration pieces to bring up the cutter board.

[@emilycummings7540]

19:40 Add non slip rubber grips on corners of cutting board. It will add height to the board allowing it to set flush when covering the sink.

[@GolfMissouri]

WOW someone is mad at the other. One of the most esthetic part of the kitchen and hubby is pouting on the laminate ..

[@billyemartin2975]

I like your motto! "It's good enough". 🤣🤣🤣

[@rongray4847]

Your whole build is looking good guys, you got this, it’s all coming together. That renovation is going to be beautiful. 👍👍❤️❤️🇨🇦

[@olebloom1641]

Y'all are better than you think. It's coming out nicely.

[@chelesekenny864]

I can’t wait to see it when it’s all done

[@josephyoung5395]

a little hint use the router left to right

[@chrisschiel6741]

Take some clear nail polish and paint it on ALL the edges of the countertop. Especially the sink area. It will keep any water from penetrating. I did this on my class C and it worked great. You don't see it if you only lightly brush the edges. .

[@nikkicheshier1791]

I’d say you two are in the groove so to speak lol Nice job I’m super proud of you both keep up the good work I love the videos!🙏💙🩷🐾👍🏻👋🏻

[@radstayathomedad9178]

While I am enjoying the project I hate to point out the mistake that no one would ever put an under mount sink on a laminate countertop. While I did see the extra waterproofing effort I still give it a year maybe before the water seeps in and the countertop starts expanding and falling apart around the rim of that sink. Under mount sinks should only be used on solid surface countertops.

[@GasTachs]

Yup

[@truckerzwyf]

Victoria. Just get some clear rubber bumper feet for your cutting board. They just stick on and will elevate it a bit more.

[@badtoro]

Exactly

[@DebDeBoop]

I agree wholeheartedly!!! I’ve been doing reno’s with my husband for 40 years and we have never done that. Undermounts are meant for solid surface counters only. You are scaring me! I want so bad for this to turn out for you! Also it is not a common thing for MDF to be used for any type of countertop with a sink or water source. First leak in the sink or the window and you will have to replace it because it just disintegrate.

[@crashweekly7925]

This is where they learn by their mistakes, I see a lot of decisions they make that probably shouldn't have been done but they did it anyways. This is what happens when you get 2 people who really need a master class in DIY before attempting a build like this, they will definitely be masters at redoing counter tops within 6 months of water saturating that MDF.

[@Murminator660]

When I built countertops I doubled up the overhang so the reveal strip look thicker then it hides the gap where the box meets the top then from the inside you can screw the box into the counter edge to hold it down.

[@robammer6968]

The samurai looks good!

[@thomashorn9152]

You guys did a wonderful job. Better than what I would of done for sure. Can't wait for your next video..

[@GolfMissouri]

Maybe put some kind of a tab under your cutting board to level it out… good job on this remodel…

[@leestanphill1]

You both have done an incredible job!

[@victorramirez3583]

Great job guys as always I’m very proud of you guys great team work

[@Adam_Gray]

As Craig would say; "Good enough for government work" ! Works for me too!

[@karinwest919]

You two continue to amaze me!!

[@marciacoker2968]

I’m excited to see your impressive work! 👏👏 looking really great!! Maverick and Leland are sure curious today ☺️🐾🐾

[@Steeler_nation2005]

You guys are really entertaining, I love watching you guys… whether you’re on the road or tackling your own DIY project. You guys are awesome.

[@Fam4Moore]

You guys are doing awesome! My husband and I put in one set of French Doors and he is done, I mean he does not want to do any other type of home improvement. The drawer slides would kill him. I have had to fix the ones needing repair in our house.

[@kellyshawn3473]

My favorite is when yr hubby takes jabs at you,...lol It's almost the best part! Really like watching it's fun and lower cost for normal people.

[@myakkacityriders1341]

I must say, using ETRAILER on line and phone ordering was very simple. Miss Jamie was well informed. very pleased so far with the ordering process . have fun with that project. I watch every episode..

[@wildrvlife]

So awesome to hear!! We really do love working with them, it makes our projects so much easier

[@mordiaky]

I followed your direction as a random you tube video and I must say... you led me astray LOL J/K

[@stephennowicki7158]

Nice work. It's coming together! 😊

[@SMeyer68]

I am sure you found out by now that the reason the faucet on/off is on the side is because as you’re doing dishes you constantly shut the water off bumping the handle. I have to say I am impressed by your thoroughness even though must of these projects are your first attempt. Great job !

[@goldfinger180024]

You are doing a great job.

[@davidperham897]

Oh ya good start with matching work clothes, I know you got them in the last episode Enjoy watching your a lot of fun & entertaining 🇨🇦Cdn. Dave🇨🇦 Found you early

[@kevintrapkinsable]

I love that verse! With all that is going on in my life, it is good to ask others for their understanding to help you figure things out!

[@frankking5625]

Nice Job guys

[@riangabriel23]

Y'all are killin it! Love seeing the progress each week!

[@rdrindy]

beautiful...put rubber feet on butcher block to raise it up ... loved this remod .

[@fitzget01]

Keep at it. I wonder if you could have used a kitchen rolling pin to improvise with when applying the laminate? I’m glad this is you and not me!!

[@beckiegodby]

You have done a great job on that countertop. Would adding some little rubber feet on the bottom of the cutting board raise it up to the height hou want?

[@bkfrance2]

Loved the scripture at the end!

[@doublediamondrailroad5949]

Looks really good! 🎉😊

[@juanitasellshouses]

For projects like this, McMaster Carr is your friend. Shipping isn't free, but they have everything needed in pretty much any size you could want. They cater to manufacturing facilities but we ordered from them all the time for our van build. I also suggest finding a way to make a toe kick. Just cut out three inches of the bottom but leave enough on the sides for support. Thanks for the video!

[@katewebber1131]

Love watching my favourite guys,working hard, from your biggest Aussie fan. ❤❤❤.

[@ChrisStudebaker-v7e]

Oh-oh-oh! It's Thursday evening and time for another Wild RV Life video! Yay! ❤ Victoria was really excited about the progress of the kitchen in this one! Fun to watch!

[@HeatherandPaulsReality]

Y’all are doing an amazing job on this RV keep up the great work y’all

[@kycalm]

Enjoying your show and appreciate that you bring us along for the whole ride. Glad you guys work well together. Blessings from a couple who built an entire stick frame house together. The give and take is a real thing!💜

[@DavidMarie-li5ez]

Your new names are now Bodgett and legett 😂😂,well done guys it's looking good

[@johnsandell4501]

"SPONGE" is looking spiffy!!! Nice build👍👍👍

[@lylam1712]

You guys are so fun to watch. I believe the way you two work together proves you’re truly in love. You Enjoy being with each other and are having fun doing a really hard job. God bless all your endeavors.

[@WilliamMassey-j5c]

Looking Good!! Leeland is fast runner for his age.. Maverick was eating his dust!!! LOL

[@ClydeHollingsworth-e7k]

good job keep up the good work

[@SpaceForce2019]

You guys are amazing, no fear, press on!

[@cheriangel777]

Love it! My favorite is when Victoria is taking initiative and asks Craig a question and he’s like “I don’t know” 🤣🤣🤣

[@lonnieitschner5059]

Put little rubber feet on that cutting board and it will sit flush.

[@badgerpa9]

Nice job, looks like fun. Stay safe and healthy.

[@tonymarrazzo354]

Get extra cabinet door bumpers and put 4 of them on the bottom of your cutting board and it will be closer to flush! Really enjoying your build!

[@wildrvlife]

Great idea, thanks for the tip! And thank you for watching!

[@GaryRupp-fe6ly]

Looking good, and since I haven’t done my Kitchen renovation very helpful episode you guys 👍🇺🇸❤️🙏🏻

[@mikeparton2722]

Nice job guys, but I have to ask are you going to put a door under the stove so you can access all the plumbing easier.

[@bkfrance2]

Such a fun video! Yall are doing a great job with this renovation project.

[@paulmcdonald3570]

Screw some plastic risers under your cutting board to raise it up flush with your counter top.

[@wildrvlife]

This is such a good idea! Several people have mentioned this and I am definitely going to try this out!

[@treleicia]

I love watching them ❤

[@TonyPennyWonder]

Counter top looks nice!

[@truckerzwyf]

Where's the opening for under the cabinet, to access plumbing and put your dish soap?

[@billsherer7629]

😁 Credit to the overalls!!

[@bludoe1]

Looking real nice, great work!

[@robynidyllwild6755]

As I sit here in Southern California ya’all better be watching fires that you build a little closer!! 😮

[@kennisjarvis8105]

Well done!

[@rentme2011]

Great job! Hope you’re all enjoying the winter wonderland today ❄️🌨️

[@lisagardner903]

Hubby and I love to watch your videos!

[@TonyPennyWonder]

Still diggin your floor choice :)

[@jamiefelix3233]

Great job guys! Love you can still keep your humor and haven’t killed each other yet!😂 Keep up the good work- looks great so far!!❤

[@karensevern328]

We’ve had the same problem watching u tube videos. We watch 3-4 on something and look to see who is saying the same thing and go with the majority. Don’t let it get you down your doing a big job and there’s bound to be bad days. Chin up and just start again the next time.

[@commununityconsultant6029]

You could put little wooden pegs feet under the wooden sink cover to make it flush … good job guys! 🙌🏻

[@cherifroehling6593]

Victoria! Great job on the routing!

[@Drew-Cherry7]

Pray that MDF don’t swell it’s not good for wet surfaces or moisture 🥲 I’ve followed the entire journey love the channel

[@karensevern328]

I have to agree with some of the others I have an rv with an undermount sink and it’s ruined the countertop. We’ve been so careful to wipe up water but within a year and a half countertop is swelling.

[@kenvolk6501]

NICE!

[@joanjackson2170]

So fun watching you get the laminate out of the box!

[@wildrvlife]

Haha it was a bit of a struggle

[@annamaybeekman]

GREAT JOB GOD BLESS LOVE YOU GUYS

[@sunshinervtravlers57]

Looks great, you guys are pro cabinet makers. Lol 🌞

[@wildrvlife]

It was definitely a learning experience! 😂

[@roxyg74]

We dont have the skills. It would not be worth it for my husband and I and our sanity. You guys are awesome.

[@tonypowell]

Your work is looking great ! QUESTION ! Are y’all going to be at the Tampa RV Show this year ?

[@DebDeBoop]

Thats what they are redoing this RV for. They want to drive it there.

[@SheilaOsborne-k5c]

Real nice and Clark!