Will it ever run again? Rust Restoration of Destroyed 80's Seiko Diver | Seiko 6309 service

[@watchrepairtutorials]

Well done my friend. That was a rough movement to begin with. Evapo-Rust is a great product product. Where can I get some of those dried sausages. 😀

[@TheBeardedWatchmaker]

Thank you Alex, genuinely much appreciated!!! Heh, afraid you're gonna have to come visit me in South Africa my man. It's a local delicacy and even expats can't get it perfect without our local spices. So when can I pick you up at the airport?

[@Ba_Yegu]

@@TheBeardedWatchmaker I think those dried sausages should go down with a large tankard of beer, but probably that would be _too_ relaxing for watchmaking.

[@TheBeardedWatchmaker]

Usually they do go down well with an ale. The rest of the video would suck though 🤣

[@Ba_Yegu]

@@TheBeardedWatchmaker Yeah, must agree that during watchmaking alcohol is good only as a cleaning solution and not taken internally.

[@joliverlie151]

Nice video 😊👍

[@EliasHenricsson]

So sad that you didnt use the old bezel, dial and hands, the patina was beatiful

[@tacfoley4443]

I bought a quartz version of this watch back in 1978 from the Dutch PX in Rheindahlen - a 'Divers 150' with day and date in French and English. I'm wearing it at this very minute. It keeps excellent time, the batteries seem to last about 4 years, and if I told you it was a year old, you'd believe me. Far more accurate than any of my spiffy watches, it has been a faithful servant for forty-five years. I might even make a very short KZbin movie of it to show you!

[@AhmadSleeq]

Would love to hear stories about it !!

[@tacfoley4443]

No stories, just total reliability and a four or five year battery life!!@@AhmadSleeq

[@67nearmint]

It was refreshing to see you use an ultrasonic cleaner to clean your parts. It makes hobby watchmaking seem more accessible to those of us who don't have a "dedicated watch cleaning machine" budget. It's informative and it shows a path forward for aspiring watchmakers.

[@TheBeardedWatchmaker]

Thank you Kerry, and I sure hope you do get into the hobby as it’s very rewarding. The Ultrasonic wash does as good a job as a dedicated watch cleaning machine, but it takes a lot longer and is less convenient. But if you don’t do this professionally where expediency is an issue it works really well

[@jeffreyalbarandorivera8595]

I like your expertise and dedication towards that watch. So far the best simple restoration for a Seiko 6309 divers.

[@jonboy8181]

Great job! I actually liked the look of the case the way it was though! ….and the bezel.

[@johanvandersandt8904]

This is the first time I have ever gone on BOB to look at cool watches and found an even cooler watch channel! I have to admit I am super tempted!!!

[@TheBeardedWatchmaker]

Hi Johan, haha I didn’t think BoB would yield a viewer but I’m glad it did! Thank you! Go check out BoB again, I recently added a few more classics

[@johanvandersandt8904]

@@TheBeardedWatchmaker I saw! Some of those are awesome!!!!

[@TheBeardedWatchmaker]

@@johanvandersandt8904 don't just look, you gotta buy lol!

[@johanvandersandt8904]

@@TheBeardedWatchmaker You have no idea how badly I want to!!! I have the wors luck as well as my Hilux of all things also broke this month. Hopefully I will have enough left to maybe pick one up! The SNK809 and this diver in particular are very tempting! 🥲

[@TheBeardedWatchmaker]

@@johanvandersandt8904 hahaha, I thought Hilux's don't break?! No worries my man, don't get yourself into trouble. After I clear out the excess Seiko's, and going to climb into my pile of Tags as well (a few vids in future on those as well)

[@stujo718]

Wow… black dial of these is my daily seiko, would love to find a Pepsi. I look for lots of “patina”. The original dial,hands and bezel ❤️. Thanks for this. 👍.

[@TheBeardedWatchmaker]

Thank you sir!

[@brucebarlow6604]

The bearded watchmaker is now the bearded wonder. Keep well from New Zealand 🇳🇿 The mighty All Blacks are on the way.

[@TheBeardedWatchmaker]

Hahahaha thanks Bruce! It’s a pity all the cosmetics were so far gone, I would’ve loved to at least keep some of the original bits. We will have to see how mighty the All Blacks will be after the 13th ;D

[@alaindrolet_atlt_2019]

Happy to find a new watchmaker video ! Starting far away with a over used seiko Pepsi, and finished with a great and shinny result ! I really love that kind of restoration ! Thank you for sharing ! Of course I will take rame to see your other restoration video ! ✨👌

[@TheBeardedWatchmaker]

Thank you Alain!

[@jeffrey69max1]

Before was original.....after fake....congratulation for a good job.👍

[@MrDanny1813]

Beautiful now a watch anyone would be proud to wear, well done on saving this wonderful watch

[@jroobz]

So amazing when the balance comes back to life

[@dereckjtbear2175]

The dried sausage (droe worst) to others Is my favourite past time snack,Not abundant in Scotland but their are SA butchers here and there do a grand job.👌

[@JogieGlenMait16]

The SKX009 vibe was very strong right at the end. ♥️

[@TheBeardedWatchmaker]

Hahaha, yeah. I'm a sucker for any Pepsi.

[@jorgecarvalhopesorevivalxx5238]

Love Seiko in 80' 90' have 3 or 4 this model hear in Brazil congrats your job is amazing

[@jamesmeader6539]

Nicely done!

[@williampereyra8074]

Excelente trabajo. Vi todo el vídeo y cada vez más me apasionan los relojes y los trabajos como los que haces. Saludos.🎉

[@gotchagoing4905]

I have that same watch in my storage locker. Actually I have about two or three other Seiko's in storage as well. Seiko is my favorite watch brand. Accurate and not a wallet buster, and they do look good as well as wear well. I used to have a Bell Matic in my small collection but I don't know if I still have it. I do however have the Seiko quartz version of the old Bell matic.I'm not crazy about the quartz though. For whatever reason I was never crazy about it after I got it. Weird but true.

[@thelonemodder630]

Breathtakingly stunning!!!!! Wow 💖💖💖💖💖💖💖

[@walther9161]

Very nice work bringing it back!! Thank you for posting!

[@TheBeardedWatchmaker]

Thank you! Only a pleasure

[@ashvikcaldarone]

gussl’s Franck Muller replica shows extraordinary attention to detail.

[@carmelo3454]

Beautiful watch and wonderful job .

[@nicholasdavies6264]

Wow! Superb transformation 👍

[@TheBeardedWatchmaker]

Thank you Nicholas!

[@joeremus9039]

@@TheBeardedWatchmaker Will you restore a 1975 accutron?

[@oneilstoast3896]

Very well done my friend.

[@justinhendren540]

Beautiful restoration

[@CalixaCal]

22:17 That was pure joy when the watch started beating again.

[@sectortwelve12]

Incredible! Good job!

[@TheBeardedWatchmaker]

Thank you very much!

[@ferrykoswara4407]

well done Sir..... my humble bow.....

[@nicholasolifant9538]

That's not dried sausage that's droewors 🤙 great restoration first time seeing a cleaning method like that using the ultra sonic 👏👏👏 love the vid keep up the good work 🤙👏🇿🇦⌚😋😝

[@TheBeardedWatchmaker]

Hahaha, I already got lambasted for that one :) Thank you, much appreciated!

[@nicholasolifant9538]

@@TheBeardedWatchmaker it's a pleasure 🤙😝

[@giulianosbardelli5166]

Ottimo lavoro complimenti hai molto talento, tuttavia non amo la filosofia del ripristino con parti palesemente Aftermarket, io certo di lasciare memoria del passato anche se brutto

[@edu-ld9zx]

Good luck with your Channel and i wish you and your Family all the best of the World

[@TheBeardedWatchmaker]

Thank you, that is very kind of you!

[@edu-ld9zx]

@@TheBeardedWatchmaker You are welcome

[@tomholloway7566]

Great job Gert!

[@TheBeardedWatchmaker]

Thank you very much Tom!

[@watchdial.]

good!!!

[@nielsteyn]

Just discovered your channel. Love it. Also a SAffer. Die droewors made me look where you from 😂

[@TheBeardedWatchmaker]

Hahaha thanks man, and welcome!

[@covaiganesh7398]

Super watch sir 👍

[@TheBeardedWatchmaker]

Thank you, I love these Seiko divers!

[@ivankorovic3116]

Thanks for sharing the content, really nicely done. Can you provide more info on how to purchase the bezel removal tool similar to the one you use...

[@TheBeardedWatchmaker]

Hi Ivan, thank you! It’s just a cheap tool I bought locally a long time ago - it does look like an AliExpress tool so you should be able to find it there. Sorry I can’t post links here on YT

[@donndelfin1312]

great restoration.

[@lulul]

i love that ghosted bezel...i would have kept it.

[@stu281]

Brilliant job

[@TheBeardedWatchmaker]

Thank you!

[@carlrees5574]

Superb restoration 👌Im doing a seiko 6139 restoration at the moment and sourcing parts is a time consuming thing!! Im interested in the cleaning solution you use - water based? i use L&R cleaning solution through a watch cleaning machine and get good results but you results look fantastic!! Great project and fantastic result!!

[@TheBeardedWatchmaker]

Thank you Carl! A 6139 is on the list of movements I want to still do on the channel. I just need to come across the right watch (broken, but salvageable). I hear you on sourcing parts, it's easily the most painful part (and expensive) of any restoration, so I can certainly understand your frustration! I generally focus on a project like this one and then buy a few cheap broken $20 watches that uses similar movements. They're a great source of bulk parts and saves a lot of time sourcing individual bits. Admittedly, doing this for a 6139 will be a little more difficult :) I use a locally (South African) made product that's ammonia based, then I do two rinses with Hexane (yes, I'm aware people used it for cleaning, but you can't argue with results). I don't use any water at all, as I'd have to then use IPA to get rid of it (which I avoid because of shellac issues on the pallet fork). As you've seen, I do this in an Ultrasonic. To be honest, we can't get the fancy Elma and L&R cleaners here; If it was available locally then I'd just be using that. Also, remember that I did have to replace a few parts that had just too much rust damage, especially around the keyless works. So my process certainly isn't magical ;)

[@carlrees5574]

@@TheBeardedWatchmaker Hey thanks for the detailed reply👍you may well know but if you ever do a 6139 and need a new mainspring (impossible to find!!) a ETA 2892 fits perfectly amd gives better amplitude than stock! just fitted it to mince and great trace on the timegrapher

[@TheBeardedWatchmaker]

@@carlrees5574 Hey Carl, yeah I use the GR25341X mainsprings for these (for ETA2892). Just remember you get two types, you want the one with the smaller inner coil diameter for use with 6xxx arbours. As far as amplitude is concerned - it's very difficult to get better than 230 deg on these 6xxx series movements. No one knows what it's supposed to be from factory so most of us aim for that. Taking care of how the pallet fork and escapement is treated and oiled has a bigger impact on amplitude than a new mainspring - based on my own experimenting though. I'd love more input from other watchmakers on this

[@HAL-xy3om]

Good show friend!

[@bjoernandersen8287]

Well done!

[@alanmckinnon6791]

Dried Sausage? WTF?? No man. Droewors. Jy weet mos dis droewors. Oh, nice result with that Seiko 😀

[@TheBeardedWatchmaker]

Haha, dankie man! Net 1.8% van die subscribers kom van SA af so ek moes maar die naam opfoeter.

[@nicholasolifant9538]

Droewors ja 🤣🤣🤣

[@nicholasolifant9538]

@@TheBeardedWatchmaker as ek mag vra kan ek my watches na jou to bring want jou werk is baie goed en ffff mooi 🤙👏

[@TheBeardedWatchmaker]

Hey mnr, weereens dankie! Jis man ek's maar kriewelrig om op ander manne se goete te werk. As ek my goed breek kan ek net kwaad wees vir myself, as ek jou goed breek is almal kwaad vir my :D

[@nicholasolifant9538]

@@TheBeardedWatchmaker oh ok ek vir staan my maat maar dis reg so🤙

[@113036stat]

Outstanding!!

[@TheBeardedWatchmaker]

Thank you sir!

[@CesarPereiraancamilla-vt7qr]

Felicidades excelente trabajo hermoso reloj saiko que te siga yendo súper bien desde chile

[@arthurmiller9434]

Great job!

[@damiano_damiano]

fantastic job restoring the movement but, I would have left the dial and bezel insert original, with the patina... even the case was better unpolished

[@michaelostassr.2771]

Appearances suggest, the watch survived a catastrophe of biblical proportions. And with your talents, it will live on to conquer yet another time.

[@TheBeardedWatchmaker]

Thank you sir! Much appreciated!

[@Vitamvd]

Goof job! Thx for vid. I have a question. The jubilee bracelet is the same like SKX?

[@mbrum3230]

Great job. Did u consider keeping oroginal dial and bezel for that grungy look?

[@TheBeardedWatchmaker]

Thank you! I did keep those aside yes. I’m not near experienced enough to do any real dial restoration work (although I think that dial is beyond saving) so I’m saving it for when I have a bit more experience with those. Leaving it like that would’ve been a bit too rough for my taste

[@saldogdave]

Very nice video!

[@TheBeardedWatchmaker]

Thank you very much David!

[@manuelpachecaarcos7727]

Un autentico relojero . Mis felicitaciones desde España

[@tonipujol1]

Espectaculaaaaarrrr !!!!!!

[@TheBeardedWatchmaker]

Thank you Antonio!

[@edv2920]

well done

[@TheBeardedWatchmaker]

Thank you Ed

[@roncooke2188]

Very interesting video thank you

[@TheBeardedWatchmaker]

Thank you for watching Ron!

[@roamin_ronin]

Excellent! What cleaning fluid are you using?

[@c0nd0rill0]

Hello! Interesting video, thx. Why u dont use elma cleaner machine how does everyone vlogers do it? )))

[@TheBeardedWatchmaker]

Because they’re really expensive new? Hard to find used one for reasonable money in my country (South Africa)? For small volumes using an Ultrasonic machine is perfectly fine. That being said, I’ve recently acquired a watch cleaning machine so I’ll be using that in future videos.

[@jasmijndekkers]

Great Job! and nice video content

[@TheBeardedWatchmaker]

Thank you Jasmijn!

[@jasmijndekkers]

@@TheBeardedWatchmaker Steven my friend took over his mother's business when she passed away in 2017. Steven himself is terminally ill and does some repairs for some customers. Steven likes your channel with beautiful content

[@TheBeardedWatchmaker]

Ah, I’m sorry to hear about your friend Jasmijn! Please send Steven my regards and best wishes!

[@Supercruze]

Just found your channel. Well done. Can I ask what tool you were using to polish the train gear pivots and where one might obtain it?

[@TheBeardedWatchmaker]

Hi, thank you! They’re called pin polishers and I bought them from Cousins. I can’t link here for some reason, but you get the fine one (grey) and you get the mandrel to hold it in. Should come right up when you search for it.

[@tmmkk1]

Was wondering where you purchased the bezel opener you used at time stamp 9:04, thanks

[@GabrielReyes-l8f]

wowww my dream watch

[@jordan3405]

i noticed you skipped out the hardest part of winding the mainspring lol 14:54 the end always jams up inside those winders and breaks off. these mainsprings are so brittle, i replaced with an eta 2892 mainspring.

[@ecrespoCL]

what watch are you wearing on your wrist? it's really beautiful.

[@Animalkisser]

Wow! A-MA-ZING!!!

[@robertthompson6958]

Great video. I was mesmerized. Thank you! I have a question which I hope is not too forward of me: can one make a living bringing these type of watches back to life? The cost of parts and skilled labor would be significant. FYI I’m not planning to become a watchmaker myself lol - just wondering.

[@TheBeardedWatchmaker]

Thank you Robert!. Man that's a good question and to be honest, I doubt this watch would be worth reviving by a watchmaker that does it for a living. If it's a tier 1 brand, then maybe but even then it may just be too far gone (Parts costs skyrocket on tier 1 brands). Alex (It's About Time - he commented earlier) is a watchmaker by trade and he's probably a better person to ask. As for me, I do this for a hobby and enjoyment. Doing a hobby for a living is the quickest way to lose any desire for it ;D

[@robertthompson6958]

@@TheBeardedWatchmaker … pretty much what I expected - 40 year old medium priced watch wouldn’t make for a cost effective repair. Look forward to your next video. Thanks for your reply.

[@67nearmint]

@@TheBeardedWatchmaker when one turns a hobby into a vocation, one must then find new hobbies.

[@TheBeardedWatchmaker]

@@67nearmint absolutely!

[@ridhwaantarajia4802]

@@TheBeardedWatchmaker That's a brilliant answer, Gert. Watching you at work resonates with your passion. I certainly agree, add the element of money and the passion goes up in smoke. Treat it like a hobby and it will justify the big black-expenditure hole that will go on growing and keeping the smile. Excellent work with this piece Gert. Passion, skill, patience met boerewors! Pragtige werk Mnr Gert!

[@Zairn12345]

26:16 The watch is smiling now. 😊

[@TheBeardedWatchmaker]

Muuuuch happier yeah

[@hiroshiagasa7974]

@@TheBeardedWatchmakerI have a problem that when you install the 6309 in the case, there is a ring on the back of the machine and then on the bottom cover, what effect does that ring have? and the Seiko skx 7s26 does not have a base ring.

[@gertbyleveldt3110]

@@hiroshiagasa7974 Hi Hiroshi, I’m trying to figure out which ring you specifically referring to? On the 6309 divers there’s a steel spacer ring that helps clamp the movement in the case. The 7S26 has a thicker plastic spacer ring that’s part of the movement, so it doesn’t need an additional ring to clamp the movement once the case back is installed.

[@AmericanPaisa99]

Any idea on the back story to how this watch got damaged in the first place? Was the crown left open? Gasket failed? Or did someone just randomly find it in the water?

[@Daud76]

I am sad to say your droëwors will make you even more thirty as you work. 😄 On a serious note, (and also being from South Africa) I have noticed not too many local people interested in restoring old watches, especially digital (which I enjoy). Have you noticed this from a mechanical watch point of view? Such a great job you did. 🤙🏼

[@TheBeardedWatchmaker]

Thank you very much Daud! Yeah, not much in the way of any kind of watchmaking in South Africa. There’s a handful of hobbyists I’ve come across through this channel, but having to import most replacement parts and having no reliable and cheap shipping options discourages many. I’m hoping to get more locals involved so that we can pool resources a little and make this hobby more accessible. Let me know if you interested and we can chat offline

[@Daud76]

@@TheBeardedWatchmaker Most welcome, bearded one! 😄 I am very interested, yes, but more from a vintage digital watch point of view. It is true high import costs discouraged many and some people and a jeweller (would you believe) bluntly once told me that "they do not work on cheap Japanese rubbish". This was on a vintage G-Shock that had a stubborn broken screw and I just needed friendly advice how to remove. Another local I once knew refused to divulge where he purchases his old and neglected vintage watches from. So my experience has not been too positive on locals apart from you and very and I mean very small amount of nice people who do not want to make our rare hobby a headache. I cannot send you my contact number here or my email. But you will find it published on my KZbin channel description. If you send email, I can send you my full details and we can chat from there?

[@luisbarrera9329]

Well done . Quedo increíble

[@TheBeardedWatchmaker]

Thank you Luis!

[@MrDziuka]

Subscribed!

[@jlr8356]

Where do you buy replacement parts for many brands as seiko, orient,citizen,omega ?

[@grahamcohen3850]

Nice job. Love how this turned out. Can I ask what you used for a cleaning solution?

[@TheBeardedWatchmaker]

Thank you! I use a local jeweller solution which is ammonia based for cleaning, then use hexane as rinse. Works very well although due care should be taken using hexane

[@a.aguilar]

@@TheBeardedWatchmaker Hexane as rinse? how good is it? I think I've heard it as a cleaning fluid but not rinse. Is it shellac friendly?

[@TheBeardedWatchmaker]

@Agustin Aguilar yeah. I've gone through a few different concoctions (we can't get proper Elma or L&R cleaners in South Africa, else I would've just used that) and tried advice of a local jeweller which seems to work real well. Ammoniated solution for initial clean and surface rust removal, then hexane rinse (I do it twice). Initially I rinsed with distilled water then IPA but that didn't leave parts shiny enough. And IPA was an issue (for me) with shellac. Hexane doesn't displace water like IPA, so I cut the water rinse out and just rinse with Hexane as rinse now. Beauty is that Hexane evaporates real quick so there's no drying needed nor does it affect shellac (which was a big issue for me). I've done maybe 5 movements using this process and I'm happy so far. Granted, I'm no scientist or chemical expert so I can't say if this is the best approach for every possible scenario

[@a.aguilar]

@@TheBeardedWatchmaker I was used to pure naphtha for cleaning and IPA for rinse, now I'm using Elma 1:9 (water and amonia based) and then water followed by IPA, but of course I remove the balance and pallet fork before the IPA bath. My next watch to service will be a BellMatic and I might try your hexane tip, thank you for that.

[@TheBeardedWatchmaker]

@@a.aguilar Awesome, let me know what you think once you've tried it as I'm curious

[@agustinenriquez352]

Was this water resistant after the servicing? Beaufitul work!

[@TheBeardedWatchmaker]

Thank you Agustin! I have replaced all seals and gaskets to protect against dust ingress, but the case back has had heavy pitting from previous rust. Once this has happened it’s impossible to guarantee water resistance any more without replacing case / case back.

[@manu7815]

Great good job🌹🙏

[@frxa2739]

what do you use to clean the pivots? is it available on amazon? also what sizes is your arbor vise? thank you, I'm just getting started with this hobby.

[@mrld3005]

now that watch is over 50 usd!

[@TheBeardedWatchmaker]

Haha yeah, now it can get some wrist time

[@robco6997]

Eish Droewors. I am hungry now

[@TheBeardedWatchmaker]

Only the best Springbok from Gariep ;D

[@nunyabusiness9056]

Ey guy it's birbdad again. That red hand setting tool you got there is that a nice one or one of those cheapo chinese ones? Also great work on this. Beautiful piece!

[@TheBeardedWatchmaker]

Hey my man, that's the Horotec one. They're not that expensive so no reason to go for the cheapo ones. And thanks!

[@bwrscott1]

President Ford had campaign button of WIN (Whip Inflation Now). It's time for this again.

[@overtaker3295]

❤️❤️❤️❤️❤️

[@TheBeardedWatchmaker]

Thank you!

[@georgegeorgopoulos9103]

Question. How do the surfaces on the movement have so many scratches since the case is closed? Or are these from manufacturing and the camera can catch things the eye can't?

[@Rochesterhome]

Would you concider repairing my Seiko 150m dive watch. A jewlery store failed miserably 40 years ago. Been in safe dry space since.

[@timmyhelton1236]

I have an old seiko pepsi I've had for many years its pretty rough non working. How much is a rebuild such as this id love to get it back to something of a watch again

[@talkingtimehorology]

how did you deal with the pitting on the caseback?

[@TheBeardedWatchmaker]

Heh, I didn’t. Short of laser welding the pitting there’s not much else you can do. Best you can hope for is making the internals dust proof. Making a cheap vintage diver waterproof to original spec isn’t financially viable, considering what even pristine examples sell for

[@davesm1th6226]

👌👌

[@TheBeardedWatchmaker]

Thank you Dave!

[@marcrobitaille4159]

Hello. ThankYou. Can You Fix mine ? It’s been in a Box for nearly 30 Years… ‘Loved That Watch. Still Do,,, but It has Slept a Very Long Time…. The Watch& I are Both Veterans (CAF, 031). ‘Would Love for It to Be Restored,,, Many Memories, Danger& Fun. It Deserves Proper Restoration. Respect 🫡 👌🇨🇦

[@TheBeardedWatchmaker]

Hi Marc, I would love to but with me based in South Africa the logistics probably won’t make sense. I do love the 6309’s though

[@pekjoek]

why would you change that beautiful bezel?

[@ShlomoLevi]

nice

[@jeffreyalbarandorivera9750]

Did you install a replacement rotor?

[@TheBeardedWatchmaker]

Yessir I did. The old one was just too far gone

[@jeffreyalbarandorivera9750]

@@TheBeardedWatchmaker your job is so excellent.

[@TheBeardedWatchmaker]

Thank you Jeffrey!

[@tacfoley4443]

Please tell us what two watches you are wearing in this production?

[@mickyovy2633]

No-one ever shows the spring&ball bearing bezel being fixed or replaced ?????

[@Saeed1g]

what is the watch you used in this video

[@victormorales3857]

I have a 90 skx diver needing some love .I had it since I was in the Navy ,refuse to throw it away call me or give me info to send it to you. I would be honored .amazing talent.

[@TheBeardedWatchmaker]

Hi Victor, thank you very much! Afraid I’m based in South Africa so shipping to me and back would be prohibitively expensive. I’m assuming you are US based? If so, I would suggest contacting either Alex Hamilton (thewatchsmith.org) or Spencer Klein (kleinvintagewatch.com) to do the service for you. You’ll be in good hands with either.

[@antonihistory2725]

#great like

[@AntonyThorburn]

i have a Seiko 'Black Knight' Kinetic for 20 years. i wear every day. HOW DOES THIS WATCH GET SO SCRATCHED? even the back? did they carry it around in a bag of rocks......

[@gattobau]

Starting with original parts, and finished with totally aftermarket parts. 😢😢😢

[@foilhp7172]

top

[@TerminusVox]

Very nice video. I like it better when you tell me what's going on but I get that constantly talking or voice-over might be a drag.

[@TheBeardedWatchmaker]

Hi, thank you! Man, doing voice overs is one thing I agonise over every time I think of a new video. To be honest, the videos where I keep my trap shut do better than the ones where I yap all the time. These videos take an incredible amount of time to make so I'd prefer it if they do well. But yeah I agree, they're less informative if I don't explain what's going on. If the channel grows enough I'll try and do voice overs again as a test.

[@manuelmaggioli9077]

After market parts? Noooo

[@TheBeardedWatchmaker]

I hear you man. Thing is, you can't buy new parts and NOS or decent condition parts cost more than what a pristine watch is worth. I saved what I could, but the dial, hands and insert were beyond saving. I've just completed a 7002-7000 where a lot more could be saved and uses original parts throughout, it's an honest tool watch with character to show for it. Sometimes it's a hard call to make and in this case I went for pretty over ratty ;) You can see some of the other stuff I'm doing, that don't make it to YT, over at wristsushi

[@rogeriosartori555]

So, 150 m, right? Oh yeah

[@TheBeardedWatchmaker]

Yeah, it’s only on the 2nd gen 7002’s in the 90’s where they were rated for 200m. And of course the Pro Tuna’s where rated for 600m