WILL IT LAST? SILVERBACK'S UPGRADED CLUTCH ROAD GLIDE PERFORMANCE BAGGER

[@jdoe4275]

Just as a side…. doubling the size of a circle results in far more than a doubling of the surface area. Great video.

[@painsrides]

Much better view and the sound is fine.... I'm a little disappointed you didn't ride Silverback in this video, half the reason I watch Cycle Fanatix is to see and hear you get excited over shit 😁

[@Doomstrader]

Looks really well made and I LOVE made in the USA but hit dam $1,500 for a clutch assembly ugh

[@jrsybad2920]

LOL! John! Brother you crack me up. So Jersey. "You know another thing that pisses me off? These freekin things fall off my trees!" Priceless! My women and I watch you all the time. Love the channel. Live in Texas now. Listening to you reminds me of my friends and family back home.

[@kadimsilahtar]

The best video you have ever shot, thanks John.

[@kennethwise7108]

I'm not into late model bikes but yeah, Evolution Industries does make the best stuff in the industry. That's all I run on my 1994 Fatboy.

[@bradlozano2571]

My experience with heavy duty clutches with heavy duty springs mean 2 things...Harder Clutch Pull and extra stress on the throwout bearing that could lead to the bearings failure...

[@josephmirigliano8728]

Always enjoy watching ride safe and enjoy 😊

[@cedriclashar8905]

Oooooooooooooooooh.....a Lamborghini orange vette🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥

[@cedriclashar8905]

This video gives one the confidence of being able to do it themselves....niiiiiiiiiiiiiice video

[@20sgcvo90]

I had the exact same problem with my derby cover I went with ARP 12 point bolts from chopper Hauss to never have this problem again especially with a component that’s a key serviceable item.

[@keithdonovan9699]

Thats why the Thrashin Supply guys John bought his bars from use that same hardware because the stock Harley stuff is junk like a lit of their stock parts hence why everyone does all kinds of mods and upgrades!

[@TheDufftank]

That clutch holds up to my 150hp and 150tq it's bad ass!

[@har1eydavidson915]

Yep I got the evo evolution clutch hub on my 2012 road glide I also have baker drivetrains Attitude adjuster I'm replacing the Altitude adjuster and going back to the ratched chain adjuster with evolution industries Bump stop on my bike and I just ordered the evolution industries clutch basket so I have a better basket.

[@bigjohnq1]

Good morning John great video. This is what I do Every 15000 miles I replace the bolts. They are inexpensive and made cheap That way I don't have that headache.. It when I do come across the bolt that that happens with when I change friends oil I have an easy out set I got it Lowe's. That way you don't have to drill it I've been pretty successful with that.. Have a great day my friend keep up the great work love the videos

[@garyehrhardt3136]

Camera angle much better, love the audio as well

[@nelsonortiz849]

Wow looks awesome. God’s blessings to you and your family John🙏🏽

[@cabby316]

Nice to see Silverback coming back together. What were those orange handled tool set I saw??? Your sound was clear but was low and then it was high and then it went low again. Nice sounding softail you got there John, 😎😎😎

[@xpresident]

Super impressive job you did on that clutch! That’s heavy duty! Well done!

[@barbercvo_19]

Looks awesome maybe u can get a clear dirby cover would look awesome

[@robertfagan8833]

Very very informative and interesting video John.. love seeing the work on the clutch.. very heavy duty.. great friends helping you.. I heard JDS cycle is hiring lol

[@DavidSmith-fw6uj]

Love from DeKalb Mississippi USA 🇺🇸

[@HOLYSHIFT]

nice video

[@jamescantlin1072]

I have pretty much same set up except I went with the harley 275 springs and there heavy-duty clutch with stock basket and stock belt 5000 miles no issue but I don't do burn outs .I like doing roll ons I'm shure it makes a big difference.

[@christopherj9494]

John, for the $$ u throwing at the primary, hope you replaced the inner primary bearing and race. Looking sweet. Went Tru this with my 120 build on my dyna.

[@508knucklehead]

Great video!! It sucks when those bolts break. I had one break when I replaced my clutch plates. I used screaming Eagle heavy duty pack.. works great on my bike.. but I am not putting down numbers close to yours. I get popping sounds with my purple panda mic.. I use a cheap mic,, I seen shadetree surgeon use it, and too me it works the best

[@capecodbiker9902]

Wow that’s bad ass brother awesome can’t wait to hear your review on it

[@timdavis8154]

I hope so.

[@matthewowen6730]

I would soak those friction disc in the oil before install.

[@TheDufftank]

Also make sure you have the thick steel on the very inside and the other thick steel on the outside or you will lose clutch pressure

[@itemps]

Thx for this

[@professor767]

John, I still get that same euphoria you showed on Blue Bayou, when I ride the Silver Bullet. It is not the most powerful bike. but it's nimble and modded to fit me perfectly. Motorcycles should be fun to ride, and you may want to reconsider raffling off that bike. I can tell you love it.🥰😄

[@bodog3209]

I’m curious, why did the clutch come in in two parts? My clutch (SE) was in one Assembly. I like that beefy thing.

[@steikio1]

Another beautiful video!

[@calvineason4315]

Sound really Good

[@cedriclashar8905]

John...so nick went chain drive when he installed a baker OD 6?

[@cliftonmagwood8581]

Unless your racing or 200hp the medium will be fine. Oh and that let jab will be nice after about a month of riding 💪🏻😆

[@marksexton5107]

Was that an oil light on the streetbob?

[@apoc8265]

mic is muffled slightly and higher speeds you can hear the wind, other then that another great video

[@JonV-r7q]

nice clutch!!! much more beef

[@johnburk5748]

Switch those derby cover bolts out to button head allens

[@willkearney5002]

John my man, great job/vid. As much as you've been to JD Cycle works, you should be able to wrench on your own Bike. Lol.

[@JD-ie3wp]

What did you torque the basket nut and compansator bolt?

[@andrewbarrale2691]

does that keep the stock primary ratio? Which sprockets do have with the chain? What is your rpm at 80 mph?

[@richardrussell500]

It looks like you reused the stock chain tensioner?

[@danielciccolo8550]

What fluid did you use in the primary I’ve heard to use atf fluid for the evolution clutch

[@CYCLEFANATIX]

Yes 👍

[@flytheedge]

I will tell you that Sean at Evolution recommends running all 6 red springs. He said the clutch can be slipping and you won’t necessarily feel it but that you can determine slippage on the dyno.

[@RacerRick12]

now you know to buy a few extra cover bolts & any other bolts you frequently use as spares! Next time you do the clutch just dip the frictions & steels in the oil & back in the basket…It doesnt make a difference having the frictions soak… you’ll notice that the clutch will bang into gear & will be pulling you with the clutch in until all the oil on the clutch plates flys off then it will engage smoother !

[@veronicawuolle3037]

Hi. I was on your website hoping to find a hat or shirt but didn't see any. Will you be getting anything like those to sell on there?

[@veronicawuolle3037]

I understand that! I will keep checking back. Thank you 😊

[@bigmanchris1425]

I’ve been following you a long time. But lately I’ve been ignoring your video’s. Mainly due to me questioning your advice on parts. You to tell the public that you’re going to give a true and honest opinion on parts. But sponsorships are huge. It’s hard for me to watch a full video when you’re talking about parts, because I question the validity of the parts that you’re promoting. 🎯🎯🎯👍🏿👍🏿👍🏿💯💯💯

[@claudebessette551]

What was the size of the socket that became flattened? I purchased the same clutch; in fact, I acquired it years ago but didn't have the opportunity to work on it.

[@yourenotrelatable]

Wouldn't the "giveaway" be considered a raffle since you have to spend money to enter?

[@DeBa1226]

Brother what do you recommend? Say a guy has some engine upgrades, he’s going to upgrade his suspension. Plans to upgrade, tires, wheels, bars, and custom paint. In what order would be best to get all these items done? I guess I’m asking with concerns of getting a custom paint job done too soon, and taking a chance of dinging it while still getting other things done on the bike. I’m sure we can cover things up, or simply “being careful” around an expensive paint job. Thoughts Big John.

[@DeBa1226]

@@CYCLEFANATIX Perfect, was thinking the same thing. Thanks brother!

[@paologiorgini9821]

Buongiorno questo kit frizione e compensatore è idoneo per trike harley davidson flhtcutg anno 2011? Grazie buona giornata. Attendo Vs. Risposta Risposta.

[@rogerramjet69]

why do you need to press that on when its a complete kit?

[@chrisstar8508]

Let me know how it feels I've heard that some of those clutches don't have much friction Zone it's either engaged or disengaged

[@velcacic743]

Thought they recommended ATF fluid why did ya use motor oil?

[@HDfredo]

I had the same question! What did he end up going with ?

[@ocglide2566]

You need to get a clear derby cover to see that beauty. It's a shame to cover it up.

[@christopherj9494]

Ya ya Trask nice stuff. Derby, Cam cover and air cleaner is saweet. $$$$ but nice.

[@itemps]

Just got this for my dyna

[@darktimbercustomknives6248]

Do I have to use their basket? Trying to upgrade comp and clutch and stay in my budget

[@CYCLEFANATIX]

Yes you do

[@darktimbercustomknives6248]

Thank u for the response Man U just saved me. Can u recommend clutch plates that will help with my added torque and power from my 128 and match a man o war without changing the basket. I looked at the recluse but am praying for some guidance

[@charlesd6459]

If you have a 128 and the Man o War motor sproket , then it’s important you use the complete Evolution clutch. The stock basket will fail in fairly short order. Pay attention to your primary chain tension. Find the tight spot and set 7/8” play when the bike is cold.

[@patrickstevens5457]

Wondered how long it would be to switch over. We use Evolution clutch packs on the majority of performance builds.

[@harleysguitars7850]

Is that really a performance bagger? Sick motor though.

[@iggymoyanojr7145]

What-if;? you use Aviation parts; I'm an old soldier And Mr. Hughes was my stepdad.!🇱🇷

[@josephmirigliano8728]

I thought Dave at JD Cycle Works was gonna fix Silverback what happened?

[@rogerbrown2838]

I went with the primary bolts for derby cover much stronger

[@ejdtm]

Add ARP engine bolt kit to the list.

[@stevengold5993]

The mic sounds to low and muffled, you can definitely tell you have a fullface helmet on

[@timdavis8154]

Recluse should refund you some money. Their design is not acceptable.

[@christopherj9494]

I agree, those plates were junk

[@ericroadking7564]

Nice work!! Those derby covers suck bolts break and holes strip always poor design!! Nice vette !!

[@jamesmarcum2323]

Bad ass

[@sonny7658]

Lathe operator no safety glasses. You may laugh, but one chip could cause him to lose an eye.

[@itemps]

A lot of the stunt dudes don't really blow clutches out cause they just dump so no slipping. More blown out trannys and engines really. Limiter hits different lol

[@ToesCapuano]

Are you allowed to pump your own gas on a motorcycle in NJ?