Will it run ? extreme budget build 1600 VW engine

this is a way to build a extreme budget 1600 vw engine that has good power with some of the cheapest parts. #rusty #vw #mike f #metal work #volkswagen #vw repair

[@ils360]

Why do you crank it over to build oil pressure with the plugs in?? Would it not be better on the starter and be quicker to build pressure with the plugs out? It would sure turn over heck of a lot faster

[@SladesVWBeetle]

That intial 2000 rpm run makes me nervous. LOL I did that on my other car for break in. I know its right to do, but sure makes me edgy. 😄 Sounds good.

[@JWClassicVW]

Engine rebuild and run videos are the best!! Nice little upgrade with the distributor.

[@davidwhocares3293]

Did you say you think it's only good for maybe 20k miles ? Why's that ?

[@johncollins5552]

Just need to know does that CB oil filter pump interfere with a stock exhaust or it just works for aftermarket exhaust headers thanks?

[@beverlyevans8784]

I'm getting my 67 bus restored just the wire ,and engine and the transmission pops out in second gear so I'm having it repaired my question to you is if you dont use any part of my 1600 engine and I get an upgrade to a 1914 engine do I still have to give you a core?

[@milomanx6531]

The previous video, At @ I never saw the lower cylinder air deflectors go in? Critical mistake, if you didn't.

[@Mikefngarage]

there in there. We used stock ones. not the cool tin. Cheap build.

[@michaelnelson9140]

If you have a timing light, which you need to accurately adjust the timing. You can use it on each plug wire to find that miss.maybe you just have a wire or plug issue. And not have to dig back into the engine.

[@agrameroldoctane_66]

Looks and sounds good ... keep doing budget staff. It is easy to do 10-grand engine. Not so keen on "hand-adjustment" of distributor though.

[@Mikefngarage]

Iv got about 150 in this one. ha ha. bet it runs longer than a GEX engine all new ha ha. or some of the other rebuilders.

[@chevymarineretired]

I can’t believe that you guys don’t know how to static time a VW.

[@marcosgomez7771]

What type of oil filter system is that you have on this engine? I noticed it goes right on the oil pump.

[@michaelnelson9140]

Does that electronic ignition produce a hotter spark?

[@delhudnall9986]

if you would take an old trans housing and cut it verticaly you could crank on stand and not knee walk around it trying to start

[@KoenigsTiger957]

Running well, keep up the good work :)

[@JWClassicVW]

Great job Mike!! love the rebuild vids!!

[@DanWebster]

cranks pretty good with wires connected

[@harryloibl5183]

The motor sounds so sweet man👍

[@brenton-lucas]

Love the engine rebuild videos, more please😉

[@JWClassicVW]

Yes bring on more rebuild vids, love it!

[@danvillareal8304]

Good job Mike they are always like that till they are completely broken in!

[@philipcable7518]

The pump covers with the spin on oil filters are great for oil and bearing longevity. Also makes servicing a lot easier. Dead spot is due to the 009.

[@Mikefngarage]

actually we changed the carb to a 31 pict 3.4 and the dead spot is gone. It can be masked by using a vacuum but not necessary.

[@danielhaapala9404]

@@Mikefngarage YES! I was just about to suggest that. Been crazy about VWs since the 60s when a friend put a super 1600 Porche engine in his 61 beetle. At 73 I no longer have strength to work on them so I gave all my VW parts to my son-in-law. Now he's got the itch. LOVE Vids never stop til you have to, then pass it forward, Dan.

[@brucegillies1694]

Non professional, but inexpensive

[@johnnieoddball]

where do you get the oil pressure gadge ? looked online but most dont have the right fittings thanks

[@Mikefngarage]

oh we use a dash mounted gauge and just dont use the oil line. one of those standard universal ones. has perfect size to screw into the case.

[@gazzafloss]

That sound brings back happy memories, it idles like my old Dad's '57 oval 36er used to with the manual choke pulled on for a winter's morning start, warming up ready to commute to work. No doubt those air cooled engines are the greatest, so simple and uncomplicated, Mike it'll be good to see how it goes in the Blue Bug, though I prefer the 36 and 40 HP for their "gentle manners".

[@Mikefngarage]

yea I love that 40 that is in that one but Gotta try this 16 single should rip.

[@beverlyevans8784]

1600 engine got a rebuilt 1914 didnt use 1600 parts or block di I still have a core charge

[@alanincardona1879]

If it was mine, i would be looking for a bigger carburator. Then check the main jet for proper mixture. Remember you installed a bigger cam. You need to feed it.

[@marcusbrown1767]

Could you possibly build a 1500? I like that size for my early microbuses.

[@redshirt-scotty]

sure, johnny's s&c. i purchased from them way back and still have a t-shirt (in a box somewhere) with their name on it.

[@Mikefngarage]

they used to have a great show back in the 80s.

[@bigteninch58]

Did anybody of you heard about the existing of a Stroboskop to adjust and fix the right ignition timing?

[@_aftattoo]

Hey Mike I have a question, I have a stock 1600 , points are bad, can I run pointless in the stock vacuum advance distributor or should I switch to 009?

[@DanTheManIOM]

yes you can run it. Email pertronix. Having said that, they have had some quality control issues in the past and if you mix red/black, it's cooked. DONE. -- if you have stock carb, svda should work fine. Good luck !

[@cyprianskiba8768]

What kit is that for the External oil filter?

[@spark_EE]

CB performance maxi pump I believe

[@michaelbevan3285]

when you fit that type of spin-on oil filter, do you still retain the old oil filter/screen?

[@hillbillyvwnut1205]

She sounds good 👌

[@MrBoi-nt8ih]

Yes Mike! Put the motor in that beautiful Bettle...

[@JWClassicVW]

I agree, sounds like a good home for that motor!

[@vulturedroid9804]

Success well done. A useful workhorse.

[@JWClassicVW]

Yup great job, love that sound!

[@redshirt-scotty]

where did you get the weld/bolt heater box to header flanges? do they work or leak?

[@Mikefngarage]

car craft. We use them so the slip on ones like to slip off.

[@vdub9943]

Nice one, being back East would be doing this type for sure. It’s a runner! Excellent video as always!

[@Mikefngarage]

thanks for that.

[@JWClassicVW]

Yes great work as always Mike!!

[@rayanesoto1054]

That engine sounds/looks pretty strong..

[@JWClassicVW]

Love the sound of a flat 4, the boxer engine in my fav!

[@ivorwm2291]

I found a hunting buggy that that is the chassis and engine from a 67 for $500. The floor pan has a few rust holes. I wonder if the seller still has the body. I'll call tomorrow. Your engine sounds great. I think it will run well

[@Mikefngarage]

yea you need a body

[@ivorwm2291]

@@Mikefngarage I'll inquire about the body

[@mikehammer4546]

What happened to Chris, I don’t see him much any more?

[@gcahal1]

dont care what the wife says im buying another bug

[@Mikefngarage]

gotta do it. They are expensive but really can be fun

[@erwinsm10]

Johnny Speed and Chrome , I used to live close to the retail store in Orange County Cali . They were great 80 s store like Car Custom in Azusa Cali.

[@Mikefngarage]

yea for sure they are all long gone. scene has changed so much. and prices are much higher.

[@The-Trinity-Bro]

It will be smooth in a bug or Ghia. Not so much for a bus.

[@ropadoped]

Was wondering what the cc were on that?

[@Mikefngarage]

I dont remember the cc but we were going for around 8 to 1 and we had about .60 deck height.

[@JWClassicVW]

Sounds like a 1600 or 1641.

[@Mikefngarage]

@@JWClassicVW 85.5 with a nice sized cam. OMG in the car it is surprisingly fast for what it is.

[@triariicat8448]

how much oil pressure should you have without spark before the initial start up?

[@redshirt-scotty]

26:30 i don't see any super cool tin. the actual assembly went by pretty fast. using the stock deflectors?

[@Mikefngarage]

not on this one. I will be upgrading it as I find parts. The single port engines run pretty cool stock. I will be putting on the super cool tin later when I change the heads to dual port. We want to show both ways so people can use what they have.

[@SDsailor7]

Is that oil filter original to these engines? I forgot if they had them? anyone know? thank you

[@940joey2]

👏👏👏👏

[@erdilaras]

I would put a vacuum advance distributor on it. And maybe try to get the venturi out, if the carb was 34 pict 3 and jet it accordingly. Other than that sounds pretty good, nice work!

[@Mikefngarage]

only have a manifold and carb for a 30 pict so I need to swap meet some more parts.

[@nswiss19751]

Is the footprint on the 30 carb same as the 34

[@erdilaras]

@@nswiss19751 no it's not. 30 pict carbs got smaller bore diameter than 34 pict ones. You can use smaller carbs on 34 pict style manifold with an adaptor. But not vice versa.

[@Framlife351]

Are the missing pipes you mention at 25:55 part of the cooling system?

[@rogerberrier4826]

My buggy has a AE sooo that's a 1971 1600dp what type is that 1,2,3,or4?? Please

[@13badbrad1]

Roger Berrier looks like a single port, type 1

[@49BigPoppa]

That’s sounds a lot like Mustie

[@MrJrjunky]

These fellows know less than nothing, a little knowledge can very dangerious

[@stanandstansfriend6019]

Well they obviously know more than you do. Who's watching who's video? Where are yours at buddy?

[@smokepeddler]

Worth watching. Thanx

[@michaelnelson9140]

Will you do a video in the car?

[@michaelnelson9140]

Oh, never mind. I see you do have a timing light.

[@type2523]

Will this dizzy also work on a vanagon

[@Mikefngarage]

I have done several type 4 engines just bearings and rings. plus heads. ran pretty good years ago.

[@michaelnelson9140]

I suppose you would need a differant coil.

[@JustBugginVW]

Hey Man! My Father and I are doing a Restoration series on a 1972 Super Beetle(Just Started Doing Videos), Tomorrow we are uploading a Motor Assembly Video! love the video and was just wondering by chance ,how did you start it on the ground? no tranny to hold the starter? just want to really see whats behind the motor haha. My Dad first car was a vw beetle and my dad has been restoring muscle cars for abt 25 years and just started back on beetles about 6 years ago. My first car was a vw beetle too and we mad a rat rod out of it , i have full video on the story about it. sadly had a tragic ending to it. would be nice if you could check it out and give us any advice on how to get this "vw youtube life" going. It'd be greatly appreciated

[@Mikefngarage]

I just uploaded an engine stand video and it has the start stand on it too. check out the channel for a few videos ago.

[@JustBugginVW]

@@Mikefngarage Okay thank you! ill check it out

[@brianseibert946]

how much for a kick ass motor??

[@Mikefngarage]

the cheapest rebuilds are about 1200 if you DIY. for machine work and parts. if you have a good case. The most expensive non turbo engine is close to 10 grand. with carbs.

[@toymot]

What would the budget be on this build? kzbin.info/www/bejne/haealZamm5h7qdk

[@Mikefngarage]

omg I want one of those but talk about expensive. hand made.

[@toymot]

@@Mikefngarage Same here! For now I will be getting a good detailed desk piece model from here: www.theweedub.com

[@hopsgarage5513]

Man she raps... What cam was it? Eagle 100?

[@Mikefngarage]

no specs on it really called a 268. between engle 110 and 100. more duration. I think it is 380 lift 268 duration.

[@hopsgarage5513]

@@Mikefngarage it sounds great!

[@smsjr36]

Put some Dual 34s on it

[@martinmejia9159]

Here you. At I see Az plate

[@jimmywilkinson9190]

Even if you go DP you will still need to make the main jet in a 34 over sized , if not you will run hot . Do you have another Progressive ? That will run like it is if you just up jet that 30. Or if you got enough room put a 30-34 adapter . I can think of some one who should at least overhaul their 1600 FI fast back (Brian) the nut.??? Rambus has had 4 cases 6 sets of pistons and probably 12-14 cranks and rods. The pistons that lasted the longest were Cofabs. . It has been at both sides of IH10 and has gone from Denver to Hope Canada and then down here to south Texas then to Florida and back. How I tell it is some of the parts have over 856,000 on them. OH yeah 9 sets of ball joints. Good Video Mike

[@Mikefngarage]

checking around right now. I do have another one but I am putting it on another build. gonnd try some swap meet finds for this engine to keep it super low budget