Will Tire Prep Help?PB Blaster to the Rescue!

[@peteroosterhoff8850]

We run, when its coulder outside, proline angle block tires (2.2 on 2wd buggy) when parkinglot bashing. These look to be exact same profile. They hook very good without any help, so if the car doesn't run well its most likely a setup thing like you mentioned. Prepping them would help, but also would make them wear out even faster. Normally we run louises on concrete and asphalt, only when these don't work anymore we take proline's since they cost 3x as much to run on pavement. I think, no, i'm sure you can have a lot off fun racing parkings with a few guys with the same cars (preferably 2wd's because they are more spectaculair to drive) since we also have a lot off fun doing it. Not to be rude, but if i would put my buggy next to yours in a friendly race you probably would throw it in the bin or race back to the shop to tune it. I know they are not exactly same cars, but think somewhat comparable. Also their handling has surprised some off my other friends with big 1/8 4wd rc's or spectators that occasionally stop to look whats going on... They are really fast, and not just in a straight line.

[@Canadianrcguy]

Thanks for all the info! I’m just beginning my oval car journey, lol I’m sure I would love your car! Getting a Buggie is next on my list. I am a dirt guy at heart, so I doubt I do much on the pavement in the future for racing. Next season my dirt oval will be ready to get some race nights going. 🏁

[@peteroosterhoff8850]

@@Canadianrcguyok, well nothing wrong with being a starter. Then maybe tell some things i noticed off the start is car sliding out off power. I am not an (dirt) oval expert or anything, but what directly came up in mind seeing it run was, raise front (helps rear), less shock angle rear, maybe thinner oil (rear) for more grip, maybe other springs, if allowed adding some weight can make big difference (i have multiple weights i can put in battery tray depending on grip, i have way more power so its really necessary) to give an idea 20-30gr on or under the servo makes a huge difference). In that order, testing one thing at a time. Personally like to do/test things myself and see how everything effects the car. Also wright down settings, so you know what works in certain conditions. Cornering is btw very important, so testing helps yourself to learn to cut the corners in tight and constant. Consistent laps probably most important in oval, not to be fastest on the straights. Easier is when your racing with a club ask other guys. They probably know better then me because they run same cars. But you can also bet the best guys don't tell all the tricks, you might become tuff competition. Good luck with racing!

[@BrockHazell]

Hey my dad and I love watching you and I sub to you

[@BrockHazell]

The pilons on the right look fake lol

[@johndean5320]

All I can hear is u flicking that wheel. I really shouldn't Sterrett like that

[@Canadianrcguy]

I was trying a cheep scamazon microphone, won’t be using it again.

[@dakotabatt3265]

@@Canadianrcguy I believe he is talking about how (by the sound of it) you continuously let go of the wheel to straighten the wheels. Your fingers shouldn't leave the wheel, it tends to make you oversteer.

[@FearlessTrailhawk]

Or...just learn how to drive? This was painful to watch. (Editing didn't help either) Sorry, i know its not fluffy rainbow feedback, but if the only comment you get is 'awesome video' then how will you grow. Yes, using sprays that make the tire compound temporarily more aticky will help with traction, which will help with lap times until the surface picks up enough dust.

[@Canadianrcguy]

All feedback is welcome! I’m not a pro, just getting back into it all after 15 or so years away so all help is welcome good and bad. And trust me if I was editing to make myself or my driving look better I would have no video to upload. lol

[@FearlessTrailhawk]

@@Canadianrcguy atleast edit out the multiple takes for some of your shots. (It may help your driving to keep hold of the steering...not sure why you kept letting go of it)

[@dakotabatt3265]

Or...don't be a dick? Your comment was a joke to read. (You're a prick) Sorry, I see your mom didn't love you, but he is still learning and actual helpful pointers will help him grow as a hobbyist. Clearly, you don't know that when you soak rubber in a penetrating oil it softens the rubber, it doesn't make it more sticky.