WIMAXIT 12” Raspberry Pi compatible Touchscreen display

[@iam.jasonhoward]

I like a good portable monitor. The touch screen and VESA mount really add value to this one. 💯

[@dezibeldani]

"UltraFire" is not the best name for LiIon-accumulators. :-D

[@FreedomAirguns]

You need a TRUE 12V/2A powerbank for the quieter. I'm powering mine with a power bank/UPS and it works, BUT, it's a true 12V2A, obviously.

[@marcus_cole_2]

Leepspvideo: can you mirror a phone and rotate the screen... Samsung and "Huawei" do desktop mode and mirror mode unfortunately mirror mode is only in landscape giving you a third of the picture only yes you can generate but it's still going to eventually go back to the landscape.... Nextpad touch still does not have firmware on their device that can rotate the screen outside of reverse landscape and landscape Love to see it do a 90° portrait and reverse portrait

[@leepspvideo]

I couldn’t find any screen orientation on the monitor.

[@jazzjazz7805]

hey thank you so much, i was really lost but ur video got me straight i appreacite it man

[@Nobe_Oddy]

ooohhh I REALLY LIKE THAT!!! I'm getting one!!!!

[@wimaxitofficial]

Thank you for your sharing, we will develop better products for everyone.

[@srvuk]

For that price I would expect full 1080p.

[@iam.jasonhoward]

I was feeling the same. But, you won’t find many 1080P touchscreen portable monitors under 200.

[@ralphmcmahan2139]

They have their own website. With warehouses in multiple locations including the US. I don't know about support as I have had no issues. I like companies that act like companies. With an actual attempt at branding and such. Two thirds of the portable monitors are from brands that in two months no longer exist on Amazon/Ebay/Newegg. Uperfect is another example of a portable monitor manufacturer that acts like a company.

[@WADiverDave]

Hi Lee, Is there a way for this display running a RaspberryPi 4 and then connecting a smart TV into the mix. I have an app that uses one display as a scoreboard and the other as the main display. Cheers

[@leepspvideo]

The Pi 4 has two HDMI sockets. Most operating systems support dual display

[@ZZKJ396]

Not bad... pity its only 1366x768.

[@alexk4894]

Does it allow to control brightness/contrast through ddc? (on linux it's possible to change monitor settings using appropriate software)

[@oso2k]

Which folding keyboard are you using? Looking for something for an HTPC Pi setup.

[@leepspvideo]

It’s shown more and linked in this video Raspberry Pi Zero 2W First time minimal setup. Powered by TV. kzbin.info/www/bejne/aZaqgWNmqr2Wi7c

[@H-W]

If I overclock my pi 3b it looks like it's not any faster. Is it only pi 3b because of the cpu? If yes it should be better on pi 4?

[@leepspvideo]

My Pi 4 is much faster Overclocked Overclock Test 2000 Vs 2147 Vs 2300Mhz. Raspberry Pi 4. Ice tower cooler Plus. kzbin.info/www/bejne/jpqxZqqYqZlpjqM Users have been Overclocking older Pi models with success for years

[@wimaxitofficial]

Thank you for your compliment and hope you have a pleasant shopping experience.

[@travisash8180]

This channel is super.

[@immersed3047]

Hi Lee, Great to see various gadgets on the market nowadays, this screen is great for something like android on the pi 4 with touchscreen support, but with a huge screen. Works great as in the video. Great Video Lee! 2nd part of the comment- I have sent you various emails regarding Immersive Linux, which is the linux made by me and my team, and also has a download link, i cannot post that here, as the comment seems to get deleted after i post any link Info about the distro is even sent to you by gmail, I would really appreciate a review from your side regarding this linux distribution made by me and team, Some fixes and faq are sent by email aswell, Thanks & Best Regards, Hope You Have a Great Day Immersive Linux Dev or Pradyot Pachore

[@leepspvideo]

Thanks, I have been busy. I will try and take a look. No need for multiple emails.

[@immersed3047]

@@leepspvideo ok sure

[@AudreyRobinel]

Hello! Very nice monitor, and price is quite good. A little warning though : ultrafire batteries are "shite". They often claim outlandish capacities (6000 to 10000) far beyond the best batteries (usualy the best ones top out at 3500mAh), and often get a 5th of the capacitiy of a genuine battery (like, 500mAh real capacity). Considering how the manufacturer is lying on the spec sheet, i wouldn't trust them with anything. You can look for reviews on youtube, they often are half hollow or other scammy stuffs like that.

[@AntonioProla]

i get all my 18650s from fogstar, they have excellent batteries and you can be sure they are legit/safe as they are a huge supplier. personal favourite: Molicel M35A which are made in taiwan, lasts for ages in my vape, im sure they could power a pi for days but i've yet to try it. also to be extra safe you should always charge lithium ion batteries with an external charger with short circuit protection/overcharge protection etc. this way your batteries will last a lot longer after repeated charging, ive used a nitecore i4 charger almost daily for years now and its worked flawlessly

[@ijabbott63]

The "UltraFire" batteries you get from the likes of eBay are usually poor quality counterfeits. Genuine UltraFire batteries are OK.

[@ijabbott63]

And any "UltraFire" 18650 batteries rated at 4200 mAh (like the ones in this video) are definitely fake (and probably nothing like that capacity) because the geniune-branded ones are in the range 2200-3000 mAh.

[@VolkerHett]

@@AntonioProla I get around 6 hours without a monitor on a Pi4 8GB out of four LG HG2 in parallel.

[@AntonioProla]

@@VolkerHett nice the HG2 are also really good, my 2nd favourite 18650. i think they are better for setups that require more than 2 batteries as well, opposed to the molicel but like i say i havent tested it so maybe its fine. i just remember that the HG2 was the go to for 3+ battery vape mods

[@rodritchie135]

I want to create a portable computer system for my off-road touring vehicle that makes use of a large display, as well as using Android (the best apps for touring are on Android)... and I really like the look of that fold up wireless keyboard that you have. That monitor would be ideal for this setup.

[@leepspvideo]

Keyboard has been added to the description. 👍🏻

[@buramar]

With my Raspberry Pi4 double click to run programs or open folders does not work. Why? How can I solve it? With Mac it works perfectly

[@leepspvideo]

What is are you using? The Pi supports many

[@alerey4363]

Outstanding versatilty and overall good picture quality on a bigger portable screen! plenty of options we're almost there for a DIY pi tablet !👌

[@SlowMenThinking]

It is always the adapters with Pis. With a power bank Screen and Keyboard mouse and a PI 4 I've used it many times instead of a laptop for setup of hardware in IT field! Resolution and size finding the Goldilocks solution this is way closer to what i need than what I got, that being said the screen I have has a 80% other use case that i did not know I needed, Related to the world wide 2 year pandemic! Keep up the interesting content...

[@wimaxitofficial]

Thank you for your compliment and hope you have a pleasant shopping experience.

[@vusimofokeng2614]

I wish the screen to be available here in South Africa.

[@leepspvideo]

They ship direct to 200 countries wimaxit.com

[@ronin5g]

Hi, im working in IT field. In need some secondary monitor for learning classes, in which sometimes are basic sketches needed to inform people for example about ethernet line management. Could you describe if its possible to draw or write on this monitor ? If yes - can i write with my palm left on right side of display? Thx for answer, Tom.

[@leepspvideo]

It’s fine for basic sketches. It’s multi touch, palm rejection would need to be something the operating system or app supports

[@janaas8448]

Love this channel than raspberry pi 🤩😍😂

[@wimaxitofficial]

Thank you for your compliment and hope you have a pleasant shopping experience.

[@KaiGoEnergy22]

Awesome. That is probably what I was looking for. A reasonable sized touchscreen for my future smarthome hosted by a Pi 4B. The touchscreen will then probably run with a pi zero 2W which seems to be working fine.👌

[@CySprouse]

Is there a setup with this thing where you can supply power and data with a single cable with a raspberry pi 5?

[@leepspvideo]

I don’t think the usb C will be able to supply a display output on the Pi 5. The stationPC can Raspberry Pi 5 plugged in to your Laptop. Windows, MacBooks, Chromebooks and Linux Laptops kzbin.info/www/bejne/moPch2ehrcmUn9U

[@TheKing200X]

Wow very nice

[@wimaxitofficial]

Thank you for your compliment and hope you have a pleasant shopping experience.

[@egga8843]

Wat are the settings (config.txt) for rasp4 ?

[@leepspvideo]

You don’t need to add anything from config.txt

[@ivy9554]

Wonderful video and the screen is pretty good, thank you Lee!

[@awesamos]

Dose touch work on the monitor when connected to MacBook?!

[@leepspvideo]

No MacOS has no touch support

[@zyghom]

as much as I love your fascination of RPi, I wish you could also have similar videos about ESP32 - that would be superb

[@wimaxitofficial]

Slow Men Thinking 2周前 Thank you for your compliment and hope you have a pleasant shopping experience.

[@DanEmmons]

Great full featured demo

[@infotruther]

does it have bluetooth?

[@leepspvideo]

No, what were you wanting to use Bluetooth for?

[@bendover4728]

Overpriced sh*t..

[@leepspvideo]

How much are you paying for a 12” touchscreen monitor?

[@Sqigglypants]

Mele doesn’t work with normal usb c as it needs 12v and doesn’t support pd. If you use a pd trigger cable you can get it working. With that cake it defaults to 12v.

[@bullshitvendor]

220 nits? meh