JAB4 & TAS5754 / TAS5756 for 4.2 System with 3-Way Digital Crossover, Bluetooth, I2S & ADAU1701 DSP

[@luisdemoraisecastrosimaole380]

Hi, I bought 2 X JAB5 to have 4 way per speaker, as the crossovers in Sigma Studio only have crossovers with 3 way, how can I make the 4 way system? Thanks in advance.

[@apichatyaitammasan]

Can I do the same thing with JAB5? but I need to use JAB5 for TW and Mid and .2 (Sub) go to AA-AB31316. how to do this?Do I need another APM2? or AA-AB41131?

[@frostausfernost5551]

When is the ICP5 finally available? As I understand it is the only option to fully program and use newer amps with not only sigma studio but also PC UI.

[@WONDOMAudio]

Hi Mate, Already in production, it is delayed due to the lack of few ICs.

[@frostausfernost5551]

@@WONDOMAudio when will it be available?

[@frostausfernost5551]

any news?

[@fabiuh991]

No other way to access parammeters?

[@asusme176cx5]

Hello, I have a JAB 4 board. I would like to make a speaker with a full range and a subwoofer driver. If I am not mistaken this the 0.2 setup. One channel goes in mono to the full range and one channel in mono to the subwoofer. My problem is that I have ICP3 and I read that I need ICP5 to make 0.2 configuration via PC UI. Can I make 0.2 setup with ICP3 via SigmaStudio? Thanks in advance.

[@WONDOMAudio]

Hi, Asus Me176cx. As we understand, you want a full range speaker and a subwoofer, which should be an audio 1.1 system. You can configure JAB4 as 2.0 output mode in hardware at first, then make use of the crossover module in SigmaStudio to create a 2-way crossover. Let signal in high frequency band moves to full range speaker and that in low frequency goes to subwoofer. It is suggested to modify based on our demo program of JAB4. Wish this could help you.

[@asusme176cx5]

@@WONDOMAudio Thank you for your answer. That's right, that's the setup I would like to build. I willl try it in the next days, I hope it will be successful. Anyway can I ask what the 0.2 setup means? What's the difference between 2.0 and 0.2 setup?

[@WONDOMAudio]

@@asusme176cx5 It's our pleasure. When it comes to 0.2 setup, we usually mean two subwoofers for low frequency audio signal playback. While 2.0 setup usually refers to stereo, namely left channel and right channel.

[@jebasteenpratheep3773]

Hi , is there any way to connect hdmi to jab4, i would like to connect with my TV through hdmi , it would be better if you share the idea

[@WONDOMAudio]

Hello. You can convert HDMI to analog then deliver it to JAB4. We are developing an HDMI audio extractor now, which can also be used as a Bluetooth amplifier. Please kindly stay tuned.

[@jebasteenpratheep3773]

@@WONDOMAudio thanks wondom and team, im waiting for your Hdmi extract board. Love from India ❤️

[@WONDOMAudio]

@@jebasteenpratheep3773 Thank you~

[@Anri81]

TAS5754 / TAS5756 has an internal DSP, why don't you use it?

[@WONDOMAudio]

It is a demo for how to use external I2S amplifier only, so TAS5754 is only used as a pure I2S amplifier.