Wood Turning - Blue Smoke

The Blue Smoke Resin Bowl comes from a mistake, But what a fantastic mistake is was.
More down here ↓↓↓ Click SHOW MORE!
Thanks to Total Boat - www.totalboat.com
Use Code Moonpie15 for 15% off (one time use)
Thanks to Starbond - www.starbond.c...
Use Code MPC10 for 10% off
Thanks to Ack's Wood Paste - ackswoodpaste....
Use Code MPC10 for 10% off
Lets Resin - letsresin.com/...
Use Code Resin5 for 5% off
Where can you find me?
Find my Facebook Page / moonpiecreations1
Find my Instagram / moonpie_creations
Find my Twitter / mpc_ken
Find me at my Webpage MoonpieCreations.com
Products I Use:
General Tools MMD4E Digital Moisture Meter - amzn.to/2ZQnuui
amzn.to/2MVp6Ro
Pinnacle Cryogenic Fingernail Grind Bowl Gouge 1/2" - amzn.to/2WEl2G5
Pinnacle Cryogenic Fingernail Grind Bowl Gouge 3/8" - amzn.to/2VcxyfD
NOVA SuperNOVA2 23055 Wood Turning Chuck Insert Type - amzn.to/2UpTYgj
NOVA G3 Chuck Without Threaded Insert - amzn.to/2UiuRgs
PSI Woodworking LA11418 Headstock Spindle Adaptor (1 ¼” to 1” x 8TPI) - amzn.to/2FPv6pb
6” Quick Release Bar Clamps - amzn.to/2FK2TQt
Laguna Tools MLAREVO 1836 Revo Lathe, 18"/36", Black - amzn.to/2UewHPa
AdTech W9201 Drip-Less Full Size High Temp Hot Glue Gun - amzn.to/2uIqcoJ
Aluminum Honeycomb Grid Core, 1/4" Cell, 12"x16"x 1.00" - amzn.to/2HTMHjc
Jacquard Pearl Ex Powder Pigments - amzn.to/2HVf14q
Craftsman 9-36857 3 Piece Wood Chisel Set With 3 Blades - amzn.to/2HWf9AI
Woodpeckers Ultra-Shear Wood Lathe Chisel Set, Full Size - amzn.to/2OFIWyh
1/32"- 5/8" Self-tightening Keyless Lathe Drill Chuck W/ MT #3 - amzn.to/2I9v0eS
NOVA Cole Jaw Set 10” - amzn.to/2uEktjP
Easy Wood Tools 4 1/2” Diameter x 1-1/4” x 8 TPI - amzn.to/2FMc9Uh
Yorkshire Grit and Hampshire Sheen www.thewalnutlo...
Easy Wood Tools Full Size Easy Rougher - amzn.to/2WHErpC
Cellulose Sanding Sealer - amzn.to/2HU61g3
Combination Square 12 In - amzn.to/2V9hhvi
Some links may be affiliate or sponsor links. Purchasing or even clicking through these links will help support me and the content I provide for free. Thank you very much for your support!
#resinturning #Resin #woodturning
DISCLAIMER: Please note that my channel is for entertainment purposes only. Don’t be stupid. You should NOT rely solely upon the information and techniques discussed and displayed in my channel. I am not a professional woodworker, wood turner or electrician and working with machinery and electricity can be dangerous. It is recommended that you fully research each technique and decide for yourself what the safest possible work method is for you.

[@MoonpieCreations]

Thank you to everyone for watching, commenting and giving my videos a thumbs up. Please like and share this video wherever you can it really helps to get my videos noticed. If you have any questions or ideas of what you want to share please leave a comment. Thank you to each and every one of you!

[@jackicomber8534]

Love the sense of humor....gotta laugh or cry like a baby! It's a learning curve....at least that would be my excuse...if I knew what I was doing...or not...

[@MoonpieCreations]

Thanks Jacki. If you don't laugh you might just have to cry. :) Ken

[@HarnealMedia]

Nice work Ken. Good save

[@MoonpieCreations]

Why thank you very much. Ken

[@ringleader33]

Love it when something works out like that. Beautiful patterns in the wood and love the blues.

[@MoonpieCreations]

Thank you very much!

[@DaveGatton]

Nice save Ken. You're really killing this bowl turning thing. I guess I should order a bowl from you before you get so famous that I can't afford you. :-)

[@MoonpieCreations]

Hahahahaha, Yea I'm sure you will find something to your liking when you bring that CNC up here. Ken

[@rbcohbuildinginspector6291]

Love seeing the mishaps and how to overcome them. Real life stuff. Lol keep em coming.

[@MoonpieCreations]

Thank you. I really wish I didn't have any, but since I do I like to show them so others can learn from my stupidity. lol Ken

[@brianchadwell9581]

Nice save.. An Awsome bowl to boot keep up the amazing wood turning

[@MoonpieCreations]

Thank you Brian. I appreciate that. Ken

[@donaldtrabeaux1305]

It turned out absolutely stunning

[@MoonpieCreations]

Thank you Donald. Ken

[@erinbuck129]

Would have bought this one if I could have! Looks like blue sky over a mountain range. Turned out great!

[@MoonpieCreations]

Thank you.

[@Napalmgas]

Great display of how to improvise overcome and adapt! Ou Raw. Ken with the WIN! 👍🏻🤘👊🔥🤩

[@MoonpieCreations]

Thanks Gary. Ken

[@Napalmgas]

Moonpie Creations Ken, I have a KZbin channel as well. 😊

[@MoonpieCreations]

Is it going to be a drone channel? I have a Mavic Pro Ken

[@Napalmgas]

Ken, the channel is going to be for life experiences doing anything form drones, metal detecting, and wood turning as soon as my Robust Sweet 16 arrives in the end of April this year. Right now Robust has a 10 -12 Week Build list. Regards, Gary

[@MoonpieCreations]

Gary Henry damn that’s a nice lathe.

[@Sacrificeofsinners]

Even with the bad top pour it came out excellent. Damn fine work sir

[@MoonpieCreations]

Thank you Jose. Ken

[@shirleyroberts8548]

That bowl turned out beautiful

[@MoonpieCreations]

Thank you.

[@raysparks8905]

Great save on the bowl strangely unique at first but definitely turned out beautiful Love your work

[@MoonpieCreations]

Thanks Ray. I always appreciate kind words. Ken

[@TheMessyStudio]

Nice bandsaw tire, buddy! And the bowl turned out nice too! LOL Billy

[@MoonpieCreations]

lol, took me a minute but I finally got what you meant. I'm slow sometimes. Ken

[@sherrygreene6245]

Your creations are gorgeous!!!

[@MoonpieCreations]

Thank you Sherry I appreciate your support a lot. Ken

[@CrossCutCreations]

The colors in the wood are just incredible. That bowl took finish nicely and looks great.

[@MoonpieCreations]

That sweet gum just popped. Sucked up the resin and looks great. Thanks man. Ken

[@crystalbailey6553]

Turned out great, keep up the great work. 👍💕

[@MoonpieCreations]

Thank you so much for the kind words. Ken

[@mikeoxmall6442]

That is beautiful looking wood..

[@MoonpieCreations]

Thank you David. Ken

[@daveb.misc.2589]

turned out great ken! love your videos bud!

[@MoonpieCreations]

Thank you Sir. I appreciate that. Ken

[@marvinmcclure4290]

It amazes me when you make a bowl, I think this is the best bowl ever. Then you show it’s flawed, and rework it to a better looking bowl. Keep up the good work.

[@MoonpieCreations]

Thanks brother. Very kind words. Ken

[@carolriley569]

Love the finished product...the wood is just gorgeous!

[@MoonpieCreations]

Thank you Carol

[@stevecerda2551]

Good job brother. Its gorgeous. It reminds me of blue skies when looking over the top of the hills out here in Texas where I'm at. Enjoyed

[@MoonpieCreations]

Thanks 👍

[@susanward5360]

Beautiful bowl , always great watching you create.

[@MoonpieCreations]

Thank you Susan. I appreciate you watching and commenting. Ken

[@philipdunn7538]

That looks killer. Gooood job!

[@MoonpieCreations]

Thank you Philip. Ken

[@PohlBarnProductions]

well at least you got it finished, I think if you go with to much hardener you get rubbery resin,

[@MoonpieCreations]

hmmmmm, maybe, but after rewatching the video I did a 5:1 pour. Hell I was so tired who knows what I did. lol Ken

[@sbjennings99]

Awesome informational educational video experience Y'alls

[@MoonpieCreations]

Thank you. Ken

[@garythomas6866]

A little hic cup turned out great . I really like the color Ken, thanks for sharing.

[@MoonpieCreations]

Well thank you for watching and commenting Gary. Ken

[@SteveC38]

In the end, it came out very nice!

[@MoonpieCreations]

Thanks Steve. Ken

[@ginaalwaysavip1177]

Absolutely amazing, beautiful, stunning.... love the colors! I think it looks better without the light color blue.

[@MoonpieCreations]

I'm glad you liked it. I still want to make one like it to see how it looks in the end. Maybe after the holidays. Ken

[@SamThomasTwistedCraftsUK]

Cool bowl dude!! 👍🤘👍

[@MoonpieCreations]

Thank you sir. Ken

[@AidenTheFGGamer]

Love it. Looks like the sky.

[@MoonpieCreations]

Wisps of blue smoke rising in the air.

[@jeffroitero4266]

@@MoonpieCreations 0:22 - For crying out loud, man. Say excuse me! Sorry, hadda do it. The second I heard that squeak, I rewound to find the timestamp.

[@AidenTheFGGamer]

@@MoonpieCreations Aiden just got home.. I said guess what today is? Without skipping a beat he says "MoonPie". 🤗 watching it now.

[@richq11]

That came out great... beautiful piece od wood as well!

[@MoonpieCreations]

Thank you Rich. Happy accident indeed. Ken

[@taytase]

I wish I could give you more than one thumbs up! Despite the mishap with the soft resin, this bowl is amazing. It looks like hills and sky to me.

[@MoonpieCreations]

Very cool way to look at it. Thank you. Ken

[@stephanietruly3447]

Ken, that bowl still came out looking awesome! I was really diggin' that design you had going. Hope to see it in the future.

[@MoonpieCreations]

I am going to attempt another similar after the holidays. Ken

[@miladyblue5077]

As always, a beautiful and certainly challenging piece. I really like how you "roll with the punches" whenever something, such as the color gives you trouble, and you still manage to make something great. As I told you before, take a cue from a cat, and look directly at the camera when the dye or whatever doesn't cooperate, and say, "I meant to do that." Please keep up the great work, your videos are a joy to watch.

[@MoonpieCreations]

Isn't that Urkles catch phrase? lol Thank you for the encouraging words. Ken

[@Ama-Elaini]

Looks like a small horizon, very nice.

[@MoonpieCreations]

Thank you Elaini. Ken

[@mauiharward7897]

Nice work around Ken. Turned out nicely 🤙🏽

[@MoonpieCreations]

Thank you Ken

[@joyenglish1275]

I like it. Looks neat.

[@MoonpieCreations]

Thank you Joy. Ken

[@Woodden]

Love it outstanding work

[@MoonpieCreations]

Thank you. Ken

[@chocolatewaifu6462]

Awww, don't get to down on your self. The bowl looks AMAZING! I think you did a great job. Don't ever sell your self short! Your a child of the most high! Jesus loves you, and the bowl ❤🙏✊😘

[@MoonpieCreations]

Thank you for the encouragement. I appreciate it. Ken

[@chocolatewaifu6462]

@@MoonpieCreations Any time Love, I enjoy your videos very much. You inspire me to create! 💖👏✊

[@islandcharlie7132]

It happened again and turned out great.

[@MoonpieCreations]

Lol, I think this is telling me to slow down and do things right. Ken

[@rb3046]

What was the wood you ended up using? Sweet grain pattern and coloring. Bowl came out amazing! Thanks for sharing.

[@MoonpieCreations]

The wood was Sweet Gum. Thank you for watching and commenting. Ken

[@brianderiggi4408]

Incredible color formation

[@MoonpieCreations]

Thank you Brian. Pouring the lighter colors into the darker ones before they gel makes for a cool look for sure. Ken

[@suzetteedwards7956]

Turned out really well. I think it looks better without that pale blue on the top.

[@MoonpieCreations]

Thank you Suzette. The new owner loves it without it also. Ken

[@bigraymie]

Good recovery Ken... well done mate B-)

[@MoonpieCreations]

Thank you Sir. Ken

[@bigraymie]

@@MoonpieCreations Sir ?? not been called that in years :-) thank you for that B-)

[@williamellis8993]

That bowl is really nice, Ken. The grain is spectacular. Why test it out first? That just takes away the adventure. Love the surgical precision strike equipment.

[@MoonpieCreations]

Thanks William. Thank strike equipment could be worth millions one day. Ken

[@shaunfelton2046]

Don’t feel too bad about circumcising the bowl, Moonman! It still turned out brilliant!

[@MoonpieCreations]

hahahaha, LeighAnn laughed out loud when I read this to her. Ken

[@shaunfelton2046]

Moonpie Creations I’m happy you all got a chuckle out of that! Keep the great work coming!

[@Lazywatchsmith]

Awesome!

[@MoonpieCreations]

Thank you. Ken

[@Ahaatravels]

Love this one Ken🥰🥰🥰

[@MoonpieCreations]

Thank you Aleisha. I appreciate that. Ken

[@Ahaatravels]

Moonpie Creations Your so welcome

[@mandicoleman7433]

I think it's beautiful!

[@MoonpieCreations]

Thank you. Ken

[@samwyz69]

Still looks really nice! Very beautiful bowl!

[@MoonpieCreations]

Thanks Anna. It was snatched off my site quickly. Ken

[@samwyz69]

Great news! I’m never quick enough to catch one... keep making more!

[@mperk12000]

Can't remember if I have seen it done, but I'm curious what would happen if you just put drops of ink/dye in clear resin and let it set up? Almost like the color/drop would suspend? Just an idea for you. I don't do much resin turning yet, but I like to pass ideas along to guys like you that do awesome work. Even with mishaps, your videos are always a pleasure to watch!

[@unclemoe5733]

Nick Zammetti has done that. You may want to check out his channell.

[@mperk12000]

@@unclemoe5733I'll check it out, I am subscribed to him as well, but must have missed that one. So much content, so little time! Thanks!

[@MoonpieCreations]

Uncle Moe is right, NZ did it and it looked pretty cool. There is so much content on YT it is hard to watch them all. That is why I appreciate you taking the time to watch my videos and comment. Ken

[@richardparker1699]

You did it again. You should pay more attention than you do. At least this piece turned out to be a wonderful turn.

[@MoonpieCreations]

Richard Parker thanks...I think?!?!? Ken

[@otekrec]

I was gonna call that pigment mashup a happy accident. As it turned out, you had something of a less happy accident with the hardening... still turned out great I think! Wouldn’t mind seeing other “color experiments” down the line... 😃

[@MoonpieCreations]

Thank you so much. They are coming after the first of the year. Gotta get through all the commissioned work first. Ken

[@erocgr00t6]

I may be wrong but I think the 2:1 is measured by the pumps included, not by weight. So pouring into container using a scale may have been the source of improper curing. Just my 2 cents. beautiful creation though

[@MoonpieCreations]

You can measure out by weight. It is 100g to 45g. I think I poured it at 5:1. I was so tired that day I messed up two other pours. lol, thank you. Ken

[@Chef_PC]

I like how you can watch the rim expand out when you spin it up on the lathe. Crazy looking.

[@MoonpieCreations]

lol that does look pretty cool. Ken

[@MassisPipes]

Have you considered the fact your resin might've overheated while turning? I've had it happen before, when I've turned a piece for too long without cooling in between and it starts to soften and become rubbery. Sometimes it hardens back up if it cools, but sometimes it never hardens back up completely. Other than that, that's a nice bowl, I love the grain on the bottom!

[@MoonpieCreations]

I did not consider that, but after re-watching the video I definitely did not mix correctly. I kept the ring to see if it ever hardens back up. lol Ken

[@normataylor3124]

Project still turned out gorgeous. U made a new saying never no what u might get from a pour. Hagd

[@MoonpieCreations]

Thank you. Ken

[@paulsmessyworkshop]

Ken, other than the “rubber lip” that bowl came out great. I really like the grain on the bottom of the bowl. Think that soft edge would have ever cured if you let it set?

[@unclemoe5733]

I thought the same thing. I've been there, called the manufacturer and was told it will harden over time. They were right.

[@MoonpieCreations]

I'm not sure if it will. I know it's been three weeks and it is still rubbery. Thanks for commenting Paul. Hope you are recovering nicely. Ken

[@ForcedNersherbyJMcKee]

Nice save and finish. Just over 2kg in resin, scrapped most of it off. Maybe a way to save resin, pour sawdust &/or resin shavings into the sides that way when you have to use resin you'll only need a bare minimum. On the other hand, i bet Total Boat love you.. ☺☺☺☺☺☺

[@MoonpieCreations]

I try to save resin every bowl. I put a large piece of pine in the middle. That saved tons of resin. I alos started cutting my blanks to the same size as the bucket. I can make four or five bowls per gallon now. Depending on the bowl of course. TB like me? I hope so, they are a pretty awesome company and I love there resin. Ken

[@deetanner7153]

Another great bowl...which came from a mistake, yes...but nevertheess without that it wouldn't be what it is.....a happy mistake always makes me smile

[@MoonpieCreations]

I have warmed to the look. At first I was mad to say the least. Thank you. Ken

[@turkeycreekknives133]

Do you like the 2-1 better than 1-1? Or is there any real difference

[@MoonpieCreations]

I've never used 1:1, but I do like the 2:1 the best out of the Thickset and 5:1 I have tried. I just think the 2:1 cures better (faster) for turning. Ken

[@jeffroitero4266]

That bad boy came out really REALLY cool. Pretty sure at this point that your super power is improvisation. Not as cool as talking to fish, but probably more useful.

[@MoonpieCreations]

I think it's my military training. We are taught to improvise and never give up. As for super powers I would love the power of transportation. But I guess I would be even fatter than I am now, cause I would use it all the time. Ken

[@cookiescoop6065]

Beautiful

[@MoonpieCreations]

Thank you. Ken

[@morgancalvi6675]

I wonder if it was the different colours that kept them from hardening. Maybe the hardener didn't react right with whatever the the colour brand was?

[@lyndacarter5090]

Lovely grain; it looks like a night sky in a canyon. Wasn’t it Bob Ross, the ‘happy trees’ guy, who said there are no accidents? That look was meant to be. Besides, if you adjust it for size, that strip you cut off can be made into a nice headband for you! Was wondering - if you layer your pours, while still wet, can you go back in with a dowel and poke it to make it look like what you did with colored sand as a kid? Have that same effect, I mean? That’d be cool...

[@MoonpieCreations]

It is a possibility and I have thought about it. I would only have to wait an hour or so between pours to create the look...... I think? Ken

[@lyndacarter5090]

Moonpie Creations life and art are both experiences/experimental....

[@stever746]

very nice save

[@MoonpieCreations]

Thank you Steven. Ken

[@victorjohnson9672]

Still looks good 👍🏿

[@MoonpieCreations]

Thank you Victor. Ken

[@MilanPotterSmith]

How long do you leave sanding sealer before using finishing paste

[@MoonpieCreations]

Usually for 30 minutes. Ken

[@nicsophocleous294]

Hi there great looking bowl may i ask do you use a pressure pot on the resin?

[@MoonpieCreations]

Yes I do! Always. Ken

[@TheWoodWhirler]

Should have cut a piece of wood for a ring on top, maybe walnut. Just epoxy it on. Would have looked nice.

[@MoonpieCreations]

Great minds think alike. I was going to do just that, but the rubbery resin had me worried so I forgot lol Ken

[@jackstrange186]

I've got to be honest. That is awesome. And it looks better after you cut that soft part off.

[@MoonpieCreations]

Thanks Jack I appreciate that. Ken

[@lyndaowen2154]

Still turned out pretty even with your boo-boo

[@rlangston1960]

Do you sand again after you put the sanding sealer on? Or you go straight to the ACK’S polish??

[@MoonpieCreations]

I go straight to the acks abrasive paste. Doug at Phol Barn scruffs it with a green pad first. Ken

[@paulhitchcox9110]

I had the same problem it was the resin was getting hot but it hardened up when it cooled down

[@MoonpieCreations]

I wish that was the issue here. I still have the ring and seeing if it will ever harden lol. I went back and watched the raw footage and I mixed it wrong. Ken

[@oilerfreak]

Nice recovery

[@MoonpieCreations]

Thanks!

[@bluelineturnings5055]

Had the same thing happen to me awhile back I let it sit for a week and it finally got hard think I didnt put enough hardener in it either

[@MoonpieCreations]

I held on to the cut off. I am wondering how long if ever it will take to harden. lol Ken

[@jeannedickinson2650]

Pretty wood

[@MoonpieCreations]

Thank you. Ken

[@SmithnWesson]

I wonder if you sprayed some of that accelerant on that soft part, whether it would have hardened. If resin is partly cured, it should be possible to finish the cure. But you need the right chemical to make that happen. You might also try heating it. Not too hot because it will smoke. But maybe around 125° or so. Just hot enough to activate the hardening agent.

[@SmithnWesson]

Nonetheless, it turned out pretty good.

[@MoonpieCreations]

The ring I cut off I kept to see how long it took to get hard. Well it took just over a month for it to harden. I'm not sure what you could do, but your suggestions are intriguing. Thanks for the watch and comment. Ken

[@SmithnWesson]

@@MoonpieCreations If it did eventually harden, then this indicates that there was at least some hardening agent in it. Normally resin would stay gooey forever if there was no hardening agent in it. The exception might be, for example, a UV cure, which will eventually harden regardless. I think heat would have sped it up quite a bit. One hour in the oven (not so hot that it will smoke) could easily equal 1 month at ambient temperature. Even a space heater or a hair blow dryer might do it. (Don't light anything on fire). You could also do a test. Take a small amount of resin and intentionally add an insufficient amount of hardener to it. Maybe 1/4 the normal amount of hardener. Stir normally. Set half aside as a control. Then do your oven test on the other half. Then compare the oven versus the non-oven. Note that slow cure resin will become fast cure resin if you use too much hardener or if you heat it. Most of the time I would suppose you don't want that.

[@jimiweeds93]

You could make a "Flash" bowl with, from bottom to top; red, green, red, blue and red. Obviously a bunch of pours and probably just about impossible but hell... why not?

[@MoonpieCreations]

Hahhahahahaa, cool idea. I think it is possible. Ken

[@jimiweeds93]

@@MoonpieCreations If you can knock it out I'll take it off your hands for you. Just shoot me an email with the details.

[@Oonagh72]

I’m not worthy 🙇‍♀️. 👏🏾👏🏾👏🏾👏🏾👏🏾👏🏾👏🏾

[@MoonpieCreations]

You are always worthy!!!!! Ken

[@daveporter2555]

Hey Ken. The bowl looks cool. Is this "premiere" a form of live cast? Unfortunately I'll be working at the time scheduled if that is the case. I'll definitely watch it on the replay. Hope you get a lot viewers. Have a good 1

[@MoonpieCreations]

No sir this is just a premier for the video release at 2:30.

[@daveporter2555]

@@MoonpieCreations At least I didn't miss anything. LOL. I think it would be kinda cool to have a live chat going on while the video plays in the background. Enjoyed the video.

[@jamesbarisitz4794]

Another beauty pulled from the fire. Midas touch man! Try something off your zone. Carbon fiber & Birdseye maple. Remember your respirator. 👍

[@MoonpieCreations]

I saw Carl Jacobson do the carbon fiber. Looks cool. Thanks. Ken

[@CiCis_Mom]

I like the bowls better without a wide lip of resin. I'd rather see how the resin has filled the voids in the wood than look at a rim of plastic.

[@MoonpieCreations]

Thank you Elizabeth. I appreciate the support. Ken

[@АлександрНикулин-д6е]

👍 от друзей.

[@MoonpieCreations]

Thank you. Ken

[@riohalawa5696]

😍😍😍

[@MoonpieCreations]

😀😀😀

[@orelygarcia]

💖💯😎👍👍

[@MoonpieCreations]

Thank you. Ken

[@TTSHAWNA2]

It didn't turn out to bad.

[@MoonpieCreations]

Thank you. Ken

[@WoodenItBeNice]

Stunning Ken as always. Cheers, Huw. PS I have just uploaded my first video and would love your honest opinion. Huw

[@MoonpieCreations]

Dude. I just watched. That was so awesome. I look forward to seeing what you do. Ken

[@WoodenItBeNice]

@@MoonpieCreations I'm hoping to post one a week. I'm half way through my next project which will be a turning. Huw

[@unclemoe5733]

Judging by the abrupt end to the vedio. I'd say you were disappointed with the finish product. You shouldn't be!! We are our own worse critics. Sweet bowl Ken.

[@MoonpieCreations]

Thanks Uncle Moe, I was disappointed. But it was snatched up quickly, so I'm ok. lol Ken

[@sassas9541]

Thats a ton of wasted resin.

[@MoonpieCreations]

A ton of wasted resin? Not really. I filled the bowl with a pine filler. The top I cut off was not thrown away. The resin that did get turned off it was it take to make the piece. I'm open to suggestionsto further cut the wasted resin. Thanks for commenting. Ken

[@wontletmeseevideos]

Too bad about the weird resin thing! I hope you revisit this concept some time cos this is one of my favorite pieces now. It looks like stormy skies over a mesa range. I love seeing the "mistakes" and improv that artists do.

[@MoonpieCreations]

Thank you. I am looking to try another one of these after the holidays. Ken

[@sbjennings99]

Awesome informational educational video experience Y'alls

[@MoonpieCreations]

Thank you. Ken