Wooden Texas Flag In Depth Tutorial!

[@dcooper1994]

You could use razor blades to separate the blue section if you use stain. Creates a nice sharp division.

[@TorchedWoodWorks]

would take several, several, razor blades and you would have to get it precisely together and hope there is no gaps in between the razor blades.

[@lawrencerayborn6258]

You are welcome to migrate to Texas!!!

[@susieallen6601]

I love the ease of this project....I am making a Texas Flag for my brother in law and this is much better then what I was going to do....I wish we had seen the way you did the star....I made some wooden Houston Texans Logos for the house and for some friends and the star was the hardest....again great video!!

[@robertcasto9806]

Love the tip with Mog Podge

[@bighuey2003]

Well done. Thank you from North Dakota!

[@crazycrackalacka]

Thank you for this one, I am going to try to make one of these!

[@eddiebender1886]

Love the tutorial, made one for father-in-law, turned out great.

[@TorchedWoodWorks]

Awesome, glad it helped!

[@rgilbert33]

Loved the video. I am thinking about getting into wood working and some carving. Thanks for the help.

[@TorchedWoodWorks]

rgilbert33 thank you glad it helped!

[@dawnamel-dn3re]

I’d like more information on the process for cutting out the star. What tip did you use with the rotary tool?

[@TorchedWoodWorks]

I used a 105 bit

[@jasonkelsey9081]

That grain is sick! Almost makes you wanna stain instead of paint just to show it off, especially the blue. Excellent flag. I am a Texas boy......lol

[@TorchedWoodWorks]

Jason Kelsey I know!! I have considered having the blue board bring a separate piece but then I’d have to run the grain the other direction and that would bug me. And I get too much bleeding from stain when I use stain and painters tape. Maybe there’s a method to get crisp lines with stain and painters tape and I just haven’t found it yet lol

[@jcpallitto]

Could you just tape off the edges of the star too and modge podge instead of carving?

[@TorchedWoodWorks]

I guess. Seems difficult lol

[@TxGameBred]

Thanks for the video. Does mog podge work with stain also?

[@TorchedWoodWorks]

No paint only. Stain won’t penetrate the mod podge

[@TxGameBred]

@@TorchedWoodWorks thanks for the response. I’m following your tutorial but going to use stain. Hopefully it doesn’t seep under the tape.

[@ShoHashi]

Good stuff! Appreciate the tutorial!

[@TorchedWoodWorks]

ShoHashi thank you!

[@justinlloyd3921]

What red did you use

[@TorchedWoodWorks]

Candy Apple Red

[@justinlloyd3921]

Is it a stain or paint

[@markmyers9855]

I will be needing your help and Info I want to make this but I'm going to build my front door and it would look good on it.

[@rouxso5124]

in your video of the Texas state flag you apply mod podge but i can't tell where you are applying it , is it just on the tape, or on the tape and wood, can you clarify this for me, because i am making the flag as we speak and i want to keep the bleeding out , your video is very clear up to this point, help me with this as soon as you can , i enjoy all of your stuff, your friend from south Louisiana

[@TorchedWoodWorks]

On the wood and tape it’s basically sealing the tape to the wood to stop any bleeding

[@rouxso5124]

@@TorchedWoodWorks thanks now i know you didn't show that in the video, thanks

[@elmartinez7972]

How long do you let the blue paint dry for before you take the tape off!

[@TorchedWoodWorks]

after about 30 minutes. I don't want it fully cured when I pull the tape off. Can lead to you pulling some of the paint up with it.

[@lightningfisher8177]

I take it off asap cheers

[@DanEmCarter]

I would love to get a stainless steel star template from you. Can't find the 81/2x81/2. Only 41/2.

[@Latino4Trump]

Simple and sweet! Love the modge podge trick! Great idea😎👍. Great result! Subscribing

[@dspy9357]

Nice work. Does the mod podge work with stain?

[@TorchedWoodWorks]

D SPY9 no unfortunately only paint. The stain won’t penetrate the mod podge

[@dspy9357]

Thanks for the response that’s too bad cause I haven’t had luck with stain bleed through with using tape.

[@TorchedWoodWorks]

@@dspy9357 Yea same here, I make a lot of spartan helmets and really wish I could use stain because it burns so much better than paint does.

[@robe4262]

What type of wood do you use. I know you said 1x10. But curious on type of wood

[@TorchedWoodWorks]

Pine

[@brianyanez549]

How much for the star stencil?

[@TorchedWoodWorks]

Sorry I don’t off stencils any more.

[@tommycavazos4867]

Hello, just found your channel. Could you send a link for the Texas star template? Thank you

[@ldysunshine0002]

Nice work! What shade blue did you use for your project? I did a state plaque and used Prussian Blue, but it was too dark.

[@TorchedWoodWorks]

Just navy blue!

[@markmyers9855]

Nice flag

[@grampadeal]

What is the name of the red paint you use? Thanks!

[@TorchedWoodWorks]

Minwax water based stain tinted scarlet red

[@samuelpadilla7706]

Awesome video! I would love to get a star template from you

[@TorchedWoodWorks]

Padilla Wood Works thank you! We have them on one of our Etsy stores Etsy.com/shop/torchedcncfiles

[@DanielMartinez-th4qy]

I would like to get that Texas stencil

[@eddiecastillo2609]

Where can the i get the star from not on ebay? Thanks

[@Psdmedic76]

How can I get a star template?

[@brendashaffer7747]

I can’t find the star template. Could you help me?

[@rickysera2985]

How can I get a hold of one of these stencils?

[@wadecrews3993]

I would love a template of star so I could make this for a gift

[@TorchedWoodWorks]

Send me an email [e-mail]

[@chrisballard3862]

Torched Wood Works r

[@wadecrews3993]

Can I please get a stencil of the star?

[@shannonnery246]

How can I get one of your 8x8 stars?

[@mikeesqueda6471]

How do I go about getting a stencil.

[@TorchedWoodWorks]

torchedcncfiles.com

[@mikeesqueda6471]

Dude not seeing the Texas star stencil on your link

[@TorchedWoodWorks]

Had to remove it. My cricut is out of operation

[@wadecrews3993]

Could I please get a template for the star? I am going to make several of these and one as a give away Christmas gift for my employees at work!

[@wadecrews3993]

How was the star actually carved out?

[@TorchedWoodWorks]

wade crews used a dremel with a 105 bit

[@wadecrews3993]

Where can I get a template for the star?

[@timothyorr3272]

How can i get the template for the star

[@timothyorr3272]

I just ordered off of your web cite.

[@rouxso5124]

how do you get to your products that you sell ? ETSY i want to buy a star to make the Texas flag and i can't locate how to get there need help email me with the info thanks

[@TorchedWoodWorks]

Rouxso send me an email [e-mail]

[@rouxso5124]

you still didn't tell me how to buy your stuff send me an email with the info, thanks

[@TorchedWoodWorks]

I gave you my email please send me an email and I’ll give you my information

[@billyanglin1674]

How do you judge the size of the star

[@clintwheeler4394]

The Lone Star on the Texas flag is 3/4 the with of the blue stripe. This means that the diameter of a circle connecting the 5 points of the star is 3/4 of the width of the blue stripe.

[@donfritz9190]

How much for the star

[@jamesdaggs6406]

I want a template. Pleasse

[@michaelschwager800]

Flag looks good, but your dimensions are wrong. The width is only 1.5 times the height.

[@TorchedWoodWorks]

none of my Texas customers have complained lol

[@jameshooks6467]

hey would like to get that Texas star stencil. thanks. i'm on messenger.

[@bradallen7986]

How could I get a template or stencil of the star? I teach Texas history and would love to make something using this

[@BlueLine-BBQ]

Great video buddy! I sent you an email. Had a few questions

[@janchester1216]

You lost me when you added the star. Wish I could have seen that.

[@TorchedWoodWorks]

Yea it’s just carved out with a dremel not much to it

[@Ricktwk1212]

Was loving the video watch it all the way until the flag u didn’t show how to do it I was like smh lol

[@TorchedWoodWorks]

Haha yea I can’t remember why I didn’t show it bc it’s been awhile. But if you got any questions please feel free to ask

[@user-mb6ty7ti5k]

A country with no flag sounds better

[@scorpiohurley6786]

Texas may be dedicated to there flag ... but not as much as Georgia is to a BULLDOG....lol

[@TorchedWoodWorks]

Go dawgs!!