Thank you very much Carl, I really appreciate your opinion. I was very pleased with how this came out, the end grain holly is rock hard and polishes up very well. Cheers, Jim
@glennmay62047 жыл бұрын
It's a nice looking bowl. It reminds me of a salad bowl that we used to have back in the late '60's , early '70's. Of courage that was in hard plastic. Ah, bygones. . . . .
@JimsonMakes7 жыл бұрын
Thanks Glenn, it does have a certain retro look. Cheers, Jim
@marilyngianadda11674 жыл бұрын
A beauty! Another favourite. Keep safe!
@JimsonMakes4 жыл бұрын
Thank you very much. Stay safe Cheers Jim
@JonGreene6 жыл бұрын
I just found your channel and had to subscribe. Awesome work my friend! I look forward to watching the rest of your videos. One of these days I need to get my garage cleaned and get my lathe out of the box and get some turning done. Thanks for sharing! Jon
@JimsonMakes6 жыл бұрын
Thank you very much Jon and thanks for subscribing. I hope you enjoy my videos and you definitely need to get that lathe up an running. Cheers, Jim
@masja17904 жыл бұрын
Absolutely gorgeous!!!
@JimsonMakes4 жыл бұрын
Thank you very much Masja, glad you like it. Cheers Jim
@puddingcat14987 жыл бұрын
Another stunning bowl. I always think you must have immense patience at the squidging stage - I fear I would get impatient and end up rushing and leaving gaps. I think I shall stick to watching the videos!
@JimsonMakes7 жыл бұрын
Thank you very much. Yes it did take a while to do the squidging, Milliput has a long working time but I was pushing it a bit with this one, especially as it was a hot day and it was setting faster than usual. Cheers, Jim
@RayShaw0074 жыл бұрын
Nice job and a good commentary. Thanks.
@JimsonMakes4 жыл бұрын
Thank you very much Ray, glad you like my video style. Cheers Jim
@doswellpierce20687 жыл бұрын
A beautiful bowl. I enjoy watching you using Milliput to really enhance your projects. I am practice so I can try some projects using Milliput. Keep up the good work.
@JimsonMakes7 жыл бұрын
Thank you very much, Milliput is very versatile and gives great results, well worth trying. Cheers, Jim
@barryparks46894 жыл бұрын
Looks fabulous
@JimsonMakes4 жыл бұрын
Thank you very much Barry Cheers Jim
@Stephens8x6Workshop7 жыл бұрын
When they were handing out artistic qualities you were at the front of the queue. awesome as always my friend.
@JimsonMakes7 жыл бұрын
Thank you very much Stephen, much appreciated mate. Cheers, Jim
@maxforest30717 жыл бұрын
Great bowl , simple , plain ( nowhere to hide ) but a beautiful result. Thanks for sharing.
@JimsonMakes7 жыл бұрын
Thank you very much Max, yes nothing but a flawless finish would be acceptable on a piece like this. Cheers, Jim
@JohnClothier7 жыл бұрын
Love it Jim! Looking forward to meeting you next weekend. I'll have to give you one of my stickers for your collection! John
@JimsonMakes7 жыл бұрын
Thank you very much John, I was very pleased with this one. It will be great to meet up at UKIWS, I will bring stickers. Cheers, Jim
@danstevens39422 жыл бұрын
Well done, beautiful
@JimsonMakes2 жыл бұрын
Thank you very much
@SuperBeardall5 жыл бұрын
That is lovely bowl. I have used milliput a few times I love it. Thank you for sharing your talents.
@JimsonMakes5 жыл бұрын
Thank you very much Deborah, yes Milliput is a very versatile product and gives great results. Cheers Jim
@juniesantos69117 жыл бұрын
Absolutely beautiful work.
@JimsonMakes7 жыл бұрын
Thank you Junie , I really appreciate you taking the time to watch and comment. Cheers, Jim
@jamesh54605 жыл бұрын
Wow! Very nice.
@JimsonMakes5 жыл бұрын
Thank you very much James Cheers Jim
@JimmiePorterAtStuartArts7 жыл бұрын
Very innovative. I love this technique. You are a true master! Also I've added "palaver" to my vocabulary.
@JimsonMakes7 жыл бұрын
Thank you very much Jimmie for your very kind words. Yep, palaver is a great word and sums up much of what I do ! Cheers, Jim
@brianunderwood31097 жыл бұрын
You had me at "Milliput", lol. Love the inlay work. Glad to see you're back in the workshop. Keep up the great work Jim. Cheers from Colorado.
@JimsonMakes7 жыл бұрын
Thank you very much Brian, glad you liked it. I am struggling to get enough workshop time at the moment ! Cheers, Jim
@brucelittle71375 жыл бұрын
Beautiful bowl . Great creation.
@JimsonMakes5 жыл бұрын
Thank you very much Bruce Cheers Jim
@stewartfurini7 жыл бұрын
That looks great - neat work. The end grain on the holly works really well against the black milliput...another thing to put on the tuit list!
@JimsonMakes7 жыл бұрын
+thank you very much Stewart. I was very pleased with this one. Cheers, Jim
@Bramsshed19137 жыл бұрын
Hello Jim, I know what you mean about not getting any shop time ! Love the bowl , so very effective with the inlays! Great video Jim . Cheers, Bram.
@JimsonMakes7 жыл бұрын
Thank you very much Bram. Work gets right in the way of shop time. It's also been a bit too blooming hot lately !! Are you going to UKIWS ? Cheers, Jim
@Bramsshed19137 жыл бұрын
Hello Jim , No mate I shall not be going, as much as I would like to go I just don't like driving anymore and will soon be giving up the car completely. Cheers mate, Bram
@oldmanwoodcraft6 жыл бұрын
Jim you are an inspiration , i usually work with resin but i just ordered putty .and i will try your method .thanks.
@JimsonMakes6 жыл бұрын
Thank you very much, I really appreciate you taking the time to watch and comment. All the best, Jim
@paultrembath2017 жыл бұрын
Another fine piece Jim.
@JimsonMakes7 жыл бұрын
Thank you very much Paul. Cheers, Jim
@AsgardWoodturning7 жыл бұрын
Looks great Jim ! I'll have to stick up on milliput
@JimsonMakes7 жыл бұрын
Thank you very much, the finish you can achieve on Milliput is great. Cheers, Jim
@alfkey41557 жыл бұрын
Great piece,,, see you at Coventry.., Regards Alf
@elainehoward88225 жыл бұрын
Hi JIM, another stunning bowl, so beautiful, the way you use the milliput is amazing. Thank you for sharing xxxxxxxx
@JimsonMakes5 жыл бұрын
Thanks again Elaine, I appreciate you taking the time to watch my videos. Cheers Jim
@alansimpson5967 жыл бұрын
Thanks for another stunner Jim. Thanks also for introducing me to Milliput which I use a lot and not only for wood turning. I have a vegetable allotment and a few days ago my neighbouring gardener found that his plastic rain water butt had cracked at the bottom. I came to the rescue and fixed it with Milliput thus saving him about £40. Your likeness to Mike W is quite uncanny:-). Have a great weekend at UKIS. Best, Alan.
@JimsonMakes7 жыл бұрын
Thank you very much Alan. I hope you are keeping well, sounds like you can't make UKIWS. Milliput is fantastic for repairs, I repaired a bird bath with it recently. Cheers, Jim.
@Create2make7 жыл бұрын
That looks great, I really like the contrast. May have to get some milliput.
@JimsonMakes7 жыл бұрын
Thank you very much. Milliput is well worth trying. As you say the black worked well with the sycamore and holly. Cheers, Jim
@irenedavo37686 жыл бұрын
How beautiful
@alanmullock3817 жыл бұрын
Another cracking piece Jim👍👍😆😆😆
@JimsonMakes7 жыл бұрын
Thank you very much Alan. Cheers, Jim
@tiddlerfromtad7 жыл бұрын
Hi Jim. Another brilliant creation. It looks fantastic and no doubt even better in the hand. Hope to bump into you at UKIWS. Cheers! Andrew
@JimsonMakes7 жыл бұрын
Thank you very much Andrew. Yes it does have a certain tactile quality. I shall see you at UKIWS and give you a sticker. Cheers, Jim
@m.stratton44087 жыл бұрын
Magnificent looking Bowl Jim a wonderful job you made of it, kind regards.
@JimsonMakes7 жыл бұрын
Thank you very much, I was very pleased with the finished result. Cheers, Jim
@markb89543 жыл бұрын
I love using Milliput on small projects, but find the cost of the product these days - Jan 2021 - to be very cost prohibitive. A look on Amazon today shows it at $20.00 per box. I’m guessing it took two or three tubes of the product for this project.
@JimsonMakes3 жыл бұрын
glad you have tried Milliput, thankfully it is much cheaper here in the UK. I can’t remember how many packs I used but I would guess 2. you can get away with less by creating shallower inlay recesses but you then have to be careful not to overcut it when finishing
@BlondieCharlie7 жыл бұрын
Stunning work 😊
@JimsonMakes7 жыл бұрын
Thank you very much Charlie glad you liked it. Cheers, Jim
@cwhussey54327 жыл бұрын
on your Instagram site now... Nice... love this bowl also
@JimsonMakes7 жыл бұрын
Thank you very much. Still learning how to use instagram. Cheers, Jim
@IanMaude7 жыл бұрын
Lovely finish on that Jim! I love the subtle grains in the Holly :). Thanks for the UKIWS update!
@JimsonMakes7 жыл бұрын
Thanks Ian, I was very pleased with this one it is going to be on the Yorkshire Grit stand at UKIWS. Cheers, Jim
@salcuzzy7 жыл бұрын
That bowl is amazing, Jim. Keep up the good work, Sal.
@JimsonMakes7 жыл бұрын
Thank you very much Sal, I really appreciate you taking the time to watch and comment. Cheers, Jim
@nickzammeti7 жыл бұрын
great video Jim mate. love this bowl. I have to get my Milliput out I think . Cant wait for next week, should be a great meet up and show. all the best Nick
@JimsonMakes7 жыл бұрын
Thanks mate, I am very pleased with how this one turned out. Yep UKIWS should be a blast. Cheers, Jim
@SCCFORUM7 жыл бұрын
Hi Jim, Fantastic piece of work. Cheers Paul
@JimsonMakes7 жыл бұрын
Thank you very much Paul, I was very happy with this one. Are you going to UKIWS ? Cheers, Jim
@SCCFORUM7 жыл бұрын
I would love to mate but unfortunately I have work commitments. I'm really hoping to get to the MC though. :-) Cheers Paul
@KkmakeUkv7 жыл бұрын
Great looking bowl Jim, holy looks amazing in black Miliput. I have tickets for both days to UKIWS, but hotel too expensive so only Saturday for me. See you there. Thanks for shoutout. Keep on making
@JimsonMakes7 жыл бұрын
Thank you very much. No problem on the shoutout. I shall see you Saturday my friend. Cheers, JIm
@JimsonMakes7 жыл бұрын
Thank you very much. No problem on the shoutout. I shall see you Saturday my friend. Cheers, JIm
@chrisjp79377 жыл бұрын
Top banana!!! Purchased some Milliput after watching your videos. Can't wait for it to arrive so I can get experimenting. Keep up the excellent work. :-)
@JimsonMakes7 жыл бұрын
Thank you very much Chris, Milliput is very versatile and gives great results, make sure you mix it thoroughly and give it plenty of time to set. Cheers, Jim
@MikeWaldt7 жыл бұрын
Absolutely stunning Jim, and it looks better in the flesh mate. Had a great time with you at UKIWS, but I think you need to work on your drinking capacity, as I feel it is a little lacking!!! ;) Cheers mate Mike
@JimsonMakes7 жыл бұрын
Thank you very much Mike. UKIWS was fantastic, I don't know why you made me drink so much though !! Still recovering now ! We will have to meet up again soon mate. Cheers Jim
@Ish969737 жыл бұрын
@Jimson Stuff I think I'm going to finally start a milliput project! Should be finished in a day or two. Thank you so much for your videos, they are a wonderful source of information and entertainment.
@JimsonMakes7 жыл бұрын
Thank you very much, I am glad my videos have inspired you to try it. Cheers, Jim
@mitsukowalker58315 жыл бұрын
Masterful job!! You have again gotten me into the Milliput mood. Thanks. Where do you find/purchase holly wood like you have shown here??? Whenever I go looking I end up at exotic wood shops where all I can get are maybe 1 1/2 ft. to 2 ft. pieces maybe 3/4 inch X 3 or 4 inches. If I go to a name brand shop, a piece for a pen blank often requires a bank loan for just ONE pen's worth!!! When I went to try to grow my own all I could find were holly bushes...not the best place to find the long pieces you were hiding in your shop!!! Since I've retired I shave once/month whether I need to or not..... (Life is too short otherwise. Shaving for over 40 years just to have a job...well... that was enough.) My frequency rule includes not even shaving for church on Sundays...….. :>)
@JimsonMakes5 жыл бұрын
Thank you very much Steven. I was lucky to find a lot of small holly bushes and trees that had been cut down in forest clearance a few years ago. The holly branches had been stacked for burning so I managed to rescue a few. I have gradually used them all up on various carving, turning and walking stick projects. I really appreciate you taking the time to watch my videos. Cheers Jim
@mitsukowalker58315 жыл бұрын
Jim, I appreciate all the time and effort you take making these little gems!!! You are becoming addictive, I fear..... @@JimsonMakes
@TurningWorks7 жыл бұрын
That's a really cool piece Jim! 👍👍🍺🍺
@JimsonMakes7 жыл бұрын
Thank you very much Dave. Are you going to UKIWS ? Cheers, Jim
@TurningWorks7 жыл бұрын
Yep, sure am....I may be helping out a wee bit, but I'm going up on the Friday and coming back Sunday afternoon.
@baloo0210637 жыл бұрын
lovely job there Jim always a pleasure to watch and learn from you mate cheers Ross
@JimsonMakes7 жыл бұрын
Thank you very much Ross, glad you liked it. Cheers, Jim
@zoubirboukouba2079 Жыл бұрын
Hello, you are a great artist, I like your work, perfection and accuracy, I want to know what the black thing is, and thank you with all due respect
@JimsonMakes Жыл бұрын
Many thanks for watching, the black thing is Milliput epoxy putty
@zoubirboukouba2079 Жыл бұрын
Thank you, I hope you are always happy
@mojo65245 жыл бұрын
i'm so going to use this technique... thanks for sharing
@JimsonMakes5 жыл бұрын
Thank you very much for watching, glad it has inspired you. It is a very effective technique. Cheers Jim
@AllenORourke19547 жыл бұрын
Class Jim...
@JimsonMakes7 жыл бұрын
Thank you very much. Cheers, JIm
@leksey78707 жыл бұрын
Beautiful work!
@JimsonMakes7 жыл бұрын
Thank you very much Aleksey. Cheers, Jim
@miguelsommariva91735 жыл бұрын
Super loved it 🙂
@JimsonMakes5 жыл бұрын
Thanks again Miguel, glad you like it Cheers Jim
@davegower1236 жыл бұрын
Beautiful!
@JimsonMakes6 жыл бұрын
Thanks Dave, glad you like it. Cheers Jim
@billsbasementworkshop19024 жыл бұрын
Do you have to endorse every tool you use ? Is robert sorby sponsering you? Nice video well presented. regards, Bill.
@JimsonMakes4 жыл бұрын
Thank you very much Bill. No I’m not sponsored by Robert Sorby, I tend to say what tools I’m using as I’ve found people like to know, otherwise I tend to get asked in the comments. I’m not actually paid by any tool companies for my video work. I get some tools sent to me for free or at a discount, these tools may make an appearance if I like them. Many thanks for watching Cheers Jim
@jpwoodwork7 жыл бұрын
Mate thats incredible!! See you at UKIWS :)
@JimsonMakes7 жыл бұрын
Thank you very much Jamie. UKIWS should be brilliant. Cheers, Jim
@johnnikolaimangune2067 жыл бұрын
Great!
@JimsonMakes7 жыл бұрын
Thank you very much John. Cheers, Jim
@soapsfromhome99796 жыл бұрын
Again.....beautiful work!
@JimsonMakes6 жыл бұрын
Again.... thank you very much, I really appreciate you taking the time to watch and comment. Cheers, Jim
@soapsfromhome99796 жыл бұрын
I’ve never heard of ‘wood turning’ . It just caught my eye on KZbin and I wanted a ‘look-see’. My husband has made wooden pen cases before, but I never knew how it was done. Never thought to ask either lol. It’s quite an art and beautiful! If my arms were a bit stronger I’d give to give it a go myself, but I get satisfaction from watching. Thank you for posting your turns! 😁
@pjbaddict7 жыл бұрын
Nice one Jim... will you bring some of your wonderful creations to put on the Yorkshire Grit stand for people to look at?
@JimsonMakes7 жыл бұрын
Ok mate, will do. Have you got any YG caps left. I need one for my "hat of the week" spot on instagram. See you Saturday my friend. Cheers, Jim
@pjbaddict7 жыл бұрын
Jimson's Stuff yes mate, got one here with your name on it... well it's actually got YG on it but you know what I mean lol
@JimsonMakes7 жыл бұрын
Cheers Glyn
@Ritercrazy7 жыл бұрын
Lovely bowl!
@JimsonMakes7 жыл бұрын
Thank you very much, glad you like it. Cheers, Jim
6 жыл бұрын
👍🏻
@JimsonMakes6 жыл бұрын
Thank you very much. Cheers, Jim
@brianunderwood31097 жыл бұрын
Great job as always Jim. Simply love your videos and the excellent narration. Keep up the good work, I'm looking forward to another one soon I hope. Certainly easier said than done I'm sure. Take care. Cheers from Colorado.
@JimsonMakes7 жыл бұрын
Thank you very much Brian. I have so many ideas for videos, just no time to do them. I will hopefully get another video out soon. All the best, Jim.
@vjgrevem7 жыл бұрын
Great work, Jim, as always. BTW, your YT thumbnail is not showing for me.
@JimsonMakes7 жыл бұрын
Thank you very much Vincent. Hopefully KZbin have fixed the thumbnail issue now but the video also changed from public to private for a while without me doing anything !! I suspect I have lost a lot of views through this. Cheers, Jim
@hankheffman37556 жыл бұрын
great video, glad i stumbled upon your channel, interesting stuff and your relaxing to watch/listen to. im looking forward to seing what else you have on your channel
@JimsonMakes6 жыл бұрын
Thanks again Hank, I really appreciate you taking the time to watch and comment. I will hopefully get a bit more time to make some more videos soon. Cheers, Jim
@987P1237 жыл бұрын
keep the beard, please, you look great, good sir :) good to see you back
@JimsonMakes7 жыл бұрын
I may grow it back, it does hide some of the neck fat ! Cheers, Jim
@woodturningf-z60977 жыл бұрын
great job looks really cool👍
@JimsonMakes7 жыл бұрын
Thank you very much. Cheers, Jim
@rlt946 жыл бұрын
This has a decidedly Mid-Century look to it.
@JimsonMakes6 жыл бұрын
Yes , I was very pleased with how it came out. Cheers, Jim
@dawnmason95585 жыл бұрын
As the wood heats up doesit ever set alight as you turn it?
@JimsonMakes5 жыл бұрын
No never had that problem, in theory it is possible and I suspect that it has happened. Cheers Jim
@MakingItOutOfTheWoods6 жыл бұрын
Lovely. Great video too, you make it look easy. Nice sticker shout outs too..time to do a swap I think! Loving your channel 👍🌲🦊🌲
@JimsonMakes6 жыл бұрын
Thank you very much, are you going to Makers Central? We could do a sticker swap there. Cheers, Jim
@MakingItOutOfTheWoods6 жыл бұрын
Jimson's Stuff sadly not. But hope to meet you next year if it all happens again!! Thanks for subscribing to my channel too! 🌲🦊🌲🤗
@JimsonMakes6 жыл бұрын
PM me for a swap
@darqenator7 жыл бұрын
Great video and a beautiful bowl. Just wondering, is it possible to add coloring pigment when you mix the milliput?
@JimsonMakes7 жыл бұрын
Thank you very much, yes you can add pigment to white milliput when mixing. I have done lots of experiments with this and I have found that it is best to mix pure pigment powder into a slow set epoxy resin to form a thick paste and then knead this into the milliput. It is a messy job and be careful which pigment powder you use as some are highly toxic. Cheers, Jim.
@michaelmathews89747 жыл бұрын
I love working with Holly! Great job and beautiful bowl! BTW, do you mix your own sanding sealer? What do you use? and thanks
@JimsonMakes7 жыл бұрын
Thank you very much Michael, yes holly is lovely to use, I have done several carvings in it and it polishes very well. I always use Chestnut Products sanding sealer, I dilute it slightly using their cellulose thinners ( approx 4:1 sealer:thinners ) cheers, Jim
@kda61695 жыл бұрын
Красиво. Что это за дерево?
@JimsonMakes5 жыл бұрын
спасибо, дерево - сикомор Cheers Jim
@kda61695 жыл бұрын
@@JimsonMakes У нас такие деревья не росту . 😁
@JimsonMakes5 жыл бұрын
похож на клен
@Oldblue1107 жыл бұрын
👍👍👍
@JimsonMakes7 жыл бұрын
Thank you very much. Cheers, Jim
@andrewhexter48137 жыл бұрын
Lovely work Jim. Could you please tell me where you got or who made your branding iron and logo as I would like my own for my own woodturnings. Andy H.
@JimsonMakes7 жыл бұрын
Thank you very much Andrew. I ordered the brass stamp rom Hong Kong via eBay and I show how I converted it into a stamp in the video called Tales from the Workshop. I can't remember who the seller was now, it may have been Bidabuli or similar. Cheers, Jim
@lesdawson38473 жыл бұрын
Can I colour miliput?
@JimsonMakes3 жыл бұрын
Yes you can colour white Milliput using pigment and resin but it is a messy job and difficult to achieve much more than a pastel shade.
@JimsonMakes7 жыл бұрын
Sorry about the broken thumbnail, can't seem to fix it !!!
@mitsukowalker58315 жыл бұрын
BTW... I'm NOT Mitsuko...that's the Mrs. How her name got on here I've no idea. I'm Steven
@shanek65827 жыл бұрын
What's the sanding sealer? Can you buy it or is it something you mix? Thanks
@JimsonMakes7 жыл бұрын
Hi Shane , I use Chestnut Products Cellulose sanding sealer. Cheers, Jim
@irenedavo37686 жыл бұрын
Do you sell anything small on Etsy?
@irenedavo37686 жыл бұрын
I would love to buy something small off you via Etsy?
@JimsonMakes6 жыл бұрын
Thank you very much Irene. I will hopefully be listing some items on Etsy soon. Cheers Jim
@BlackCat_27 жыл бұрын
Wonderful bowl and just gave you a follow on Instagram. :) - Heidi
@JimsonMakes7 жыл бұрын
Thank you very much Heidi, I have followed you back on instagram. Cheers, Jim
@alfkey41557 жыл бұрын
Great piece ,,,, see you at Coventry ,,Regards Alf
@JimsonMakes7 жыл бұрын
Thank you very much Alf. It would be great to see you at UKIWS. Cheers, Jim