Woodturning a Tri-Corner Walnut Bowl

This was my fisrt attempt at woodturning a tri-corner bowl from a cube. I used my last piece of 8/4 walnut scrap to make this piece. Even though I had some issues with the pressure pot, I am very pleased with how this piece turned out. I was a little nervous about turning a cube mounted on the corners, but in the end I was nervous for no resean. This was a fun piece that pushed the limits of my comfort zone. After seeing the finished product in my hands, I have some better ideas for how I would make this style piece next time. As always, thank you for watching and I hope you have a wonderful day!
Scott
Product links
Affiliate links are used when possible and I may receive a small commission.
Superclear epoxy resin
www.superepoxy...
5% off coupon code-SQUAREANDLEVEL
superclear epoxy partner
Eye Candy pigments 👁️
bit.ly/48vZNLf
Simple woodturning tools
www.simplewood...?bg_ref=gkr80FMJN5
Acrylic Resin Roughing, Turning, Simple Scraper Set of 3
(These 3 tools are my go to favorites, you will not be disapointed!) www.simplewood...
Simple hollowing system with laser kit
www.simplewood...
Clean Armor 700 interior gloss UV finish
mywoodcutters....
UV light for curing finish (Amazon)
amzn.to/3WsUd8m
All music is courtesy of epidemic sound
#woodturning, #woodworking, #resin
‪@superclearepoxy‬ ‪@EyeCandyPigments‬

[@squareandlevel]

This was my fisrt attempt at woodturning a tri-corner bowl from a cube. I used my last piece of 8/4 walnut scrap to make this piece. Even though I had some issues with the pressure pot, I am very pleased with how this piece turned out. I was a little nervous about turning a cube mounted on the corners, but in the end I was nervous for no resean. This was a fun piece that pushed the limits of my comfort zone. After seeing the finished product in my hands, I have some better ideas for how I would make this style piece next time. As always, thank you for watching and I hope you have a wonderful day! Scott

[@WoodworkingTop535]

Thank you for sharing

[@ralphgraler4223]

Thank you for presenting your woodturnings... highend!!! That's more than comfort zone... that's special arts!!!

[@Tom-hz9oc]

Mistakes or not, you made a beautiful bowl. I love watching and learning from you. Hopefully I’ll learn from my own mistakes.

[@munzdik]

Браво и огромное спасибо от всего сердца за Вашу Красивую Художественную Работу! Смотреть как Вы работаете и творите Чудеса это лекарство для Души человеческой! Ещё раз огромное Вам спасибо! Жду с нетерпением следующие Ваши художественные работы!

[@hartwandzelt]

Who never make mistakes, learn nothing for the life.

[@tripped42]

As a carpenter, learning to be a craftsman I know mistakes are the best way to learn and improve my craft. Problem solving leads to so many new ideas. Keep it up mate. You are inspiring.

[@Charlielizard]

Mistakes happen at the worst possible time; however, I see nothing but a piece of art that deserves its own pedestal in an art gallery. What an epic piece you crafted. Am still in awe at your creativity.

[@squareandlevel]

Thank you so much. I really appreciate it. Hope you have a wonderful day. Scott

[@Charlielizard]

@squareandlevel Scott, I truly appreciate your creativity and craftsmanship and wish you and yours a blessed week. Really thank you for sharing your video with us.

[@GlennMartinPhotography]

Scott, the videography here is just superb!!

[@squareandlevel]

Luckily this guy helped me out setting up my camera and gives awesome camera advice on his channel. Thanks for everything mate. Hope you have a great day.

[@GlennMartinPhotography]

@@squareandlevel you're more than welcome. Can't wait for the next video

[@glennsoucy9767]

What I love is being 75% through the video, and having no idea what the end result will be!

[@nicktodoroff7836]

Glad to learn that I'm not the only one!!!!!!😁

[@frankmurphy2776]

I understand why you say "mistakes were made" but seeing what you've done I can't help thinking that one person's "mistake" is another's object of beauty. Thanks for sharing! 👏👏👏👍👍🏴󠁧󠁢󠁳󠁣󠁴󠁿🏴󠁧󠁢󠁳󠁣󠁴󠁿

[@squareandlevel]

I appreciate that!

[@dirtfarmer7472]

Okay you made a mistake, it worked out fine & you made a nice video, that’s 2 birds with 1 stone. Can’t beat that even with a stick. Thank you Sir

[@Sugar3Glider]

0:20 that filing angle makes it look like you're trying to wiggle your hand to the side of the blade o.o I'm sure it's above the blade but looked dangerous 😅

[@Tblanktim-mu1bh]

Beautifully done. I sure wish there was an easy way to save all that offcut. The grain in that Walnut pops.

[@againstthegrain147]

Change the title! Mistakes are relative but the 'mistake' you talk about made no difference at all.

[@Chrisla9]

Are you ‘painting’ the finished bowl with clear resin to get that glass like shine? If so how do you stop it from simply running off? How many coats did you give it? Great piece!

[@lolcec81]

Комментарий в поддержку канала и ролика, а также труда мастера.

[@AmyAnderson-fields]

There may have been mistakes, but I think that's one of the most beautiful pieces you've made. Absolutely love it!

[@BlueTurtleStudios]

You did good. Love the finished shots, very creative. Also It does look so awful when it first starts spinning with that weird air gap turning. I know you were thinking- is this what I really want to do? great video

[@squareandlevel]

Thank you sir. Much appreciated . Have a great evening Barry.

[@davidpickens3117]

OUTSTANDING JOB. How does a person go about acquiring a piece of your work

[@squareandlevel]

Thank you! It is much appreciated. In the works to hopefully sell some pieces next year. Thanks for watching. I hope you have a wonderful day. Scott

[@84deeanne]

Beautiful piece of art !!! Larry USA

[@squareandlevel]

Thank you Larry, much appreciated. Hope you have a great day! Scott

[@FRBPturning]

Beautiful piece and nice camera work!

[@squareandlevel]

Thank you very much! I really appreciate it. Hope you have a great day! Scott

[@coolabahwoodworking]

This video was one if not the best one I have seen from you. What an amazing project. Every shot was just 🤤🤤🤤🤤well done!

[@squareandlevel]

Thanks Tom. This one was fun. Have a great day sir!

[@coolabahwoodworking]

@@squareandlevel you too man!

[@ralphgraler4223]

Your woodwork is allways absolutly amazing!!! Only: your blue epoxi allways and allways!!! Sad and boring... thought... yeah... silver... great... and... what happens: blue again.... and so everything is blue!!! 😮

[@FLATSWISS]

Good to see and hear the voice of the genius, another masterpiece… peace

[@dame_nation]

Wow. I admire your dedication, focus and patience on this piece. It paid off. beautiful end result, I love the shape. 👍👍👍

[@squareandlevel]

Thank you very much!

[@jayscott306]

Great results! I'm glad it worked out so well, thanks to your skilled repair. I have never been able to get my pressure pot to hold properly to the point that when I used to cast I would leave my compressor on and the regulator set so that it had unlimited reservoir of air until it had cured.

[@bearsha]

Интересно, красиво. Одного жаль-много ореха ушло в отходы. И не совсем понятно, то что вроде бы нарезал кубики, а складыаал параллелепипеды

[@dtork47]

Very nicely done and finished, despite the pressure failure. I have not tried the cube either, thanks for the inspiration as always. Stay safe.

[@stlwoodworking]

Awesome as usual my friend!

[@squareandlevel]

Thank you!

[@RaynaBArt]

I really enjoy watching your videos! Sooo creative.

[@squareandlevel]

Thank you so much!

[@Wood_working_saifi]

I also do the same work, it is a good training work, I like this work very much, I also have a channel like this blog

[@meade5267]

Mistakes be damned...I want one😊. Absolutely beautiful.

[@alancole6912]

It turned out great! Thanks for sharing

[@squareandlevel]

Thanks for watching!

[@AmyAnderson-fields]

And the moral of this story is, next time you clean and reseal the valves on the pressure pot, test the seals before using the pot.

[@msmith2961]

Seeing that cube spin up for the first time, and taking the first bites fills me with nope 😬

[@alexondi5234]

I really enjoy your work and videos. Make more!

[@squareandlevel]

More to come! Thanks for watching. Hope you have a wonderful day! Scott

[@jaydee5447]

Well, if mistakes were made it is certainly difficult to tell. Absolutely beautiful piece.

[@joanedwards9380]

I love it 😍

[@ragnarironspear1791]

Beautiful work as always 👏🏻👏🏻👏🏻👏🏻🇬🇧

[@squareandlevel]

Thank you so much 😀

[@TurninonTulsaTime]

Outstanding Sir. Beautiful Walnut. Blue was a great choice and the resin is understated, doesn't overshadow beautiful wood. Amazing work. I'd be interested in this piece if you ever decide to market them. Thanks

[@squareandlevel]

Thank you very much! I’m hoping to sell pieces next year still working out the details. Thank for watching. Hope you have a wonderful day. Scott

[@paulplager9498]

Mistakes may have been made, but it turned out great. I like the effect of the resin.

[@beverlym5465]

It’s amazing! So beautiful! Loved the music too. ❤

[@c.a.chambers68]

This is absolutely gorgeous 💙 it!

[@squareandlevel]

Thank you so much!!

[@danwalters987]

Amazing work!! I’m blown away by your craftsmanship! What was the tool you were using right after you added the pigment and CA glue midway through the video?

[@squareandlevel]

Thank you! That was the simple scraper with a negative rake carbide insert. There is a link in the description. Thanks for watching. Hope you have a great day.

[@nabilghosn7981]

Absolutely love it, thank you

[@squareandlevel]

Glad you like it! Thanks for watching. Hope you have a wonderful day. Scott

[@dang6832]

Mistake my a…… Great looking bowl or whatever anyone wants to call it.

[@carolineecou]

I'm glad you were able to salvage this piece. Looking at the finished project, you would never know you had an equipment issue. Nice.

[@squareandlevel]

Thank you!

[@johnbrereton4756]

A true craftsman overcomes and adapes. Fantastic work.

[@scottfonner]

Haven't ventured there.......yet. Very pretty piece, well done!

[@jimrosson6702]

Wow that turned out amazing great job

[@rustienielsen6803]

Very nice. I wish more of the silver showed through.

[@nicktodoroff7836]

WOW Scott. The videography, background music and finished product were all superb! 👍👍👍👍

[@squareandlevel]

Thanks Nick. Much appreciated. Can’t wait to catch up in a few months. Have a great day sir. Scott

[@sturdyboneswoodworking]

Looks amazing Scott! Love how it turned out. The little bubble repairs just look like tiny stars in a galaxy. Well done!

[@squareandlevel]

Thanks Cam. Was pretty disappointed when I found out all the air leaked out. In the end it makes for an interesting piece and I was able to practice some damage control. Have a great day sir Scott

[@MightyWizardTim]

Awesome turning. Lot of work. Great job!

[@MrMikie69]

I really thought it was going to fly off the lathe a few times

[@markhall1510]

This is awesome, great work!!!!!!

[@deborahackroyd1036]

Stunning piece 😊❤❤❤

[@BearhawkStudio]

Amazing work, Scott! I love this piece and those colors turned out great!

[@squareandlevel]

Thanks Dustin. Appreciate it. Hope you have a great day sir. Scott

[@drucker03]

This is a real beautiful piece!

[@LuannYoumans-ec5fc]

Absolutely beautiful bowl. Thanks for sharing 👍

[@squareandlevel]

Thank you very much!

[@reetakbhandari8484]

Real life use of this art!

[@anndriapowers7533]

Absolutely stunning!!!

[@dennishedrick5108]

Outstanding

[@gregj2647]

Well done.

[@oneturnatatime6309]

Nice work 👍

[@MikeHolton]

Simple mistakes are so easy to do as they are the ones you never expect. Good recovery and beautiful piece, Thank Scott 😀

[@squareandlevel]

Thanks Mike. I got some damage control practice on this one. Glad it worked out in the end. Hope you have a wonderful day sir. Scott

[@wernerpfeifer]

Warum Druck und nicht Vakuum?

[@gambiajoe]

😀😃😁👍👍👍👍