Woodturning - Maple Burl Pieces With Designer Epoxy

Woodturning - In this video I take maple burl pieces and combine them with designer epoxy and green pearl pigment to make a beautiful one of a kind bowl. Thanks for watching and if you haven't subscribed you might miss out one the 15K subscriber giveaway bowl. Stay safe, and please like and share!
Starbond Adhesives: USE CODE: INLAYJIM for 10% OFF
www.starbond.com/
Sandpaper.ca USE CODE: INLAYJIM for 10% OFF
sandpaper.ca/
Instagram
/ spraguewoodturning
Facebook
/ spraguewoodturning
Website
www.spraguewood...
Email
[e-mail]
If you want to send something me, send it to:
Sprague Woodturning
652 Rantz Rd
Petawawa, ON Canada
K8H 2W8
This video is for entertainment purposes, please read and follow all safety precautions with all your equipment!
Epoxy used in this video
designerepoxy.ca/
American Amazon Subscribers use links below
Inkbird ITC-308 Temperature controller 1200W Heating and cooling thermostat.
amzn.to/34EdCJP
Timber check moisture meter
amzn.to/2Jn0XTt
Scotch Brite Hand Pads
amzn.to/34Foffq
Wood Bowl Finish
amzn.to/3mBT1Mj
0000 Steel wool
amzn.to/3e8lcQa
Soapstone carving blocks
amzn.to/37TYief
Pen I use, Pilot V5 0.5mm tip, Black
amzn.to/3mGBRgv
¾” spindle roughing gouge
amzn.to/3eeycUu
UC Coatings End Grain Sealer
amzn.to/3eb9jJ3
Easy Wood Tools Full Size Finisher
amzn.to/2HO8Ssx
Pressure Pot for Casting by California Air Tools
amzn.to/31Xm0T2
Canadian Amazon Subscribers use links below
Crown Pro Turning Parting Tool
amzn.to/3mCIEIo
Wood Bowl Finish
amzn.to/34DZ1Ox
0000 Steel wool
amzn.to/3jBfEyI
Soapstone carving blocks
amzn.to/3kJPX03
Pen I use, Pilot V5 0.5mm tip, Black (you can select the quantity when you get there)
amzn.to/3kUtU6U
Easy Wood Tools Full Size Finisher
amzn.to/3myOAC0
Pressure Pot for Casting by California Air Tools
amzn.to/2TCY9n5
Inkbird ITC-308 Temperature controller 1200W Heating and cooling thermostat.
amzn.to/3oINYvF
Timber check moisture meter
amzn.to/34GJs8V
Scotch Brite Hand Pads
amzn.to/2TFnqNy
As an Amazon Associate, I earn a small commission from qualifying purchases. By purchasing from the links above, you are supporting this channel so I can bring great content every week! Thanks!
Ellsworth Signature Bowl Gouge
www.leevalley....
Typhoon Carving Burrs
www.leevalley....
Sculpture Supply Carving Stones
www.sculptures...
Sculpture Supply Lead Free Pewter
www.sculptures...
Oneway Manufacturing Easy Coring System
oneway.ca/inde...
Saltmill Mechanisms
woodchuckers.c...
Peppermill Mechanisms
woodchuckers.c...
R&D Bandsaw Blades
tufftooth.com/...
Oneway Vacuum Chucking System
oneway.ca/prod...
Combination Skew Chisel and Gouge
www.leevalley....

[@cerebralmaster]

I was thinking that's got to be worth $400 then you said it. It's worth it, you're buying a work of art not just any old bowl. Absolutely stunning.

[@SpragueWoodturning]

Couldn’t agree more, thanks!

[@arthurbritton1532]

not only that but epoxy is expensive as hell

[@kumiejoubert-vanniekerk8794]

The beauty of the grain of the wood is always king! The lightly stained resin enhances the natural beauty of the bowl and I love this very much. Your wife would have been brilliant if she claimed this bowl. The pictures taken in the snow are stunning and bring out the natural beauty. Really enjoyed watching this one.

[@SpragueWoodturning]

Thank you very much!

[@ajalfieri-crispin9336]

I can’t help but see the acrylic as the ocean and the wood as the land masses. It’s like some world globe.

[@SpragueWoodturning]

I will do it in blue next time, thanks 🙏

[@ajalfieri-crispin9336]

@@SpragueWoodturning oh, I think the green is perfect as is. I think it’s really great to see how the resin opens up a whole new channel of creative possibilities.

[@RaspberryBerets]

This bowl is gorgeous! The burl has so much character. The epoxy is a pretty color and I love that it is translucent. This bowl is a winner all around. I think it is now my favorite bowl.

[@SpragueWoodturning]

Thank you so much!

[@amiteshdevic8192]

That has to be one of the best resin burl bowls I have ever seen turned! One of the things I like so much about your bowls compared to other wood turners is that you leave more wood on the bowls. I don't know why a lot of other wood turners make them a lot thinner

[@SpragueWoodturning]

I’m with you, I like a bowl with some mass, especially one that’s this small. It has a good weight to it and it’s not fragile either! Thanks.

[@sirbuleletideas1137]

COMBINATION of wood and resin makes it more durable and beautiful

[@SpragueWoodturning]

It sure does, thanks

[@chrisdavis7720]

If this was my second project and it turned out this absolutely gorgeous, I would be jumping and screaming and running in circles with how proud I was of myself!!! You are unbelievably talented! Amazing!

[@SpragueWoodturning]

Thanks 🙏

[@kmcc2891]

As a Canadian living abroad in Germany trying to get great English Instructional videos and being new to both wood turning and epoxy these have been great help. Your work is very inspiring, although there is a lot to take in , I hope to try my first epoxy and burl bowl soon once I have acquired all the right materials. So thanks for the details, and links.

[@SpragueWoodturning]

Welcome aboard! Thanks for watching!

[@elinashome-economics]

That's a piece of art. It should not be cheap or done fast - It's simply BEAUTIFUL 😍

[@SpragueWoodturning]

Thanks 🙏

[@valeriehenschel1590]

You can add diatomaceous earth to the mineral oil and wax to make a fine sanding paste that is less expensive than the commercial products. I buy it at the farm supply store where I get the bees wax granules. Bowl very nice, well done. You are definitely gaining on that learning curve!

[@SpragueWoodturning]

Thanks for the info Valerie.

[@j-ch8787]

True! And good suggestion. I used "pierre ponce" as for french varnish or even wax patina as on restoration of old furnitures. Yu must use it with parcimony and clean it after application. (with alcohol 99` applied very quickly with a pad in order not to burn the varnish. Obtain a vanishing "cloud" by landing on wood and movinge fast before yu leave the surface)

[@joyicewallace4424]

Your bowls are beyond words. I have never seen anything so beautiful this bowl looks like faces were painted on the inside!! Wow! Awesome!!!

[@SpragueWoodturning]

Thanks 😊

[@tula7141]

That bowl is well worth $400. It is a piece of art. I would pay that in a heartbeat, air bubble makes no negative difference.

[@SpragueWoodturning]

Thanks 😊

[@adriank9234]

_"I am happy with that."_ Biggest understatement of the year. *Brilliant finish, love it.*

[@SpragueWoodturning]

Lol, thanks!

[@mizanzkrypin]

Wood! Always! It makes the kitchen alive, warm and people at home in it 👍🏼

[@SpragueWoodturning]

You got that right!

[@zapfanzapfan]

Absolutely gorgeous! Definitely a competitor for more traditional glass ware wedding gifts.

[@SpragueWoodturning]

Yes it is, I sell a lot of wedding bowls, thanks

[@tom3033acq]

I can't call a vase, but one word is enough ...... Great!!!👍👍👍

[@SpragueWoodturning]

Thanks 🙏🏻

[@TopRPDRvideos]

Burls and resin, a match made in heaven!

[@SpragueWoodturning]

It’s certainly a way to save those offcuts. Thanks.

[@marcuswhite3628]

Nice rhyme!

[@frankdufault7775]

Definitely worth way more than $400, the talent started shining with your second epoxy turn

[@SpragueWoodturning]

Can’t argue that, thanks!

[@jackiecullen6907]

It’s a scientific fact most left handed people are artistic, beautiful work, greetings from Ireland.

[@SpragueWoodturning]

Correct! I’ve also seen a lot of actors being left handed as well, Jim.

[@jonathantaylor9881]

$300-$400 is a steal for Art like that. Cheers.

[@SpragueWoodturning]

I think is a good price, thanks.

[@mamm7223]

I am so impressed! By starting to use resin, you have expanded your options as far as creating. I love the light green color + pearl you chose for this resin; it was a perfect compliment to the Maple burl. This was only your second attempt at resin, and you just nailed it! Perfection. No wonder "Mama" snagged it...it is gorgeous!

[@SpragueWoodturning]

She keeps all the good ones, 😜😜 thanks.

[@mamm7223]

@@SpragueWoodturning Smart lady!!

[@michellesutton202]

Really love the translucent green with the maple. It's such an interesting wood, and the translucent shows it off. A thing after beauty❤

[@SpragueWoodturning]

Thank you very much!

[@ErictheRedCantona]

Beautiful artistry - the bowl is amazing and watching you create it is so therapeutic.

[@SpragueWoodturning]

Thanks Chris!

[@malatisingh23]

बहुत सुन्दर

[@ztheletter5296]

Thinking of starting a small business in Ukraine. Now I am convinced, not that I'll be going down the resin path but this video is wonderful

[@SpragueWoodturning]

The resin is hot right now. I have a waiting list and need to purchase another pressure pot. Thanks 🙏

[@BBB-rd2qi]

Love maple burl wood! This piece is gorgeous.

[@SpragueWoodturning]

Thanks 🙏

[@kendramanuel1858]

😃😍Absolutely stunning ❤️👍. If your wife claims it..what a lucky lady. Really enjoyed this

[@SpragueWoodturning]

😊 thank you, its all her's, lol.

[@scottfaulder4690]

This bowl is absolutely stunning. It is worth the $400 price you casually mentioned.

[@SpragueWoodturning]

Thanks Scott!

[@susanburrows5288]

Interesting to see this second bowl after seeing many of your later wood/resin pieces and how much you've learned since this bowl.

[@SpragueWoodturning]

Thanks for watching

[@philipcarthy2977]

Absolutely stunning, the amount of work involved is superb.fantastic work

[@SpragueWoodturning]

Thanks 🙏

[@c.a.chambers68]

I lke the transparent green - seeing the burl edges is so cool

[@SpragueWoodturning]

Totally, thanks!

[@Kestrel1955]

I would treasure something like this, so thank you for letting us watch as you created it.

[@SpragueWoodturning]

It was my pleasure, thanks for watching.

[@robboland9857]

Did a lot of wood and leather work 40 years ago. Used a lot of "Johnson Paste Wax" worked good for us back then.🌿

[@SpragueWoodturning]

Thanks for sharing!

[@traceyrice]

I can't believe how beautiful this bowl ended up! What an amazing job! 💜

[@SpragueWoodturning]

Thanks again Tracey!

[@christinecolvin1111]

Have you ever seen those burls they pull out of the Florida swamps? That's what this reminds me of! That slightly murky, green water with all this eldritch looking wood in it. Such a lovely piece and remarkable for only a second resin project :)

[@SpragueWoodturning]

Thank you very much! This coming week I use some mystery burl that looks like it might of come out of a swamp. Those burls in Florida sound interesting. Jim

[@lindamyfatcatcow2606]

I stumbled upon this video this morning and subbed immediately. Your bowl is utter perfection, I just love it! The possibilities are endless.

[@SpragueWoodturning]

Thanks for watching!

[@linettekindle5923]

Ive got to say that across all the You tube Wood turning videos ,that this is the prettiest bowl Ive seen.The light green with the light maple and the pattern of the wood is just gorgeous.Well done!

[@SpragueWoodturning]

Thank you 😊

[@victoriamontes3213]

This bowl is beautiful; I love your subtle use of color and shimmer. Truly exceptional.

[@SpragueWoodturning]

It does glow under a black light or UV light, I didn’t have one when I made this video but I now do, it’s actually pretty cool, thanks.

[@paulawalker7706]

I especially love your inclusive vernacular. This bowl is, I think my personal favorite.

[@SpragueWoodturning]

Thank you very much!

[@BrickhouseCraftWorks]

Hey Jim, GORGEOUS bowl! That’s an excellent bowl for your second round with resin! I’m certainly no expert in turning resin but, my process is sand up to 600 grit, then use an abrasive paste (I use Acks but, any would work), then use some sort of finish process. I’ve used OB Shine Juice, Acks Polishing paste, even hard bar carnauba wax. All of them work and have their place, in my opinion. I think the abrasive paste used prior to using the salad bowl finish would remove any imperfections, especially in the tight radius you were having trouble getting into. Then using your beeswax/mineral oil paste with the steel wool would help buff out any imperfections from the salad bowl finish. Anyway, plenty of experts out there that could perhaps share other tips. I just thought I’d throw in my 2 cents. Can’t wait for next weeks project! Take care! Seth

[@SpragueWoodturning]

Great info! Thanks.

[@marycatherinelebouef-op4hf]

Gorgeous bowl! I love how I can see faces in the wood. That color is seriously amazing! Great job! Bravo

[@SpragueWoodturning]

Thank you so much 😀

[@Oldblue110]

I think you’ve knocked it off this time Jim, looks absolutely spot on keep up the good work 👍👍👍

[@SpragueWoodturning]

Thanks, I really like this style of bowl with resin, I plan on making more!

[@thomasspencer3979]

man you do some cool stuff. I did my first bowl in 1966 and its the only one I ever did, I still have it after my parents both passed on, your doing some cool; stuff, Keep up the great work

[@SpragueWoodturning]

Thanks!

[@katherinekelly5380]

Love, love, love the colour combo! So happy the acrylic is translucent _ this reminds me of sea and sand

[@SpragueWoodturning]

Me too!! Thanks!

[@joyjeffries7962]

Today is the first time I saw you working on your resin bowls. They are beautiful. I usually watch Nick Zammeti and Ben's Work and you are right there with them. Keep up the good work. Be blessed.

[@SpragueWoodturning]

Awesome, thank you very much!

[@agwheeler2000]

Gorgeous finish, Jim. Nice to see the burl bits get a new life!

[@SpragueWoodturning]

It always made me a little sick to through theses pieces in the wood stove, now I can save them! Thanks.

[@alvinwhite8529]

I can see definitely see placing your work in a museum.

[@SpragueWoodturning]

Wow, thank you!

[@dangriffith3330]

Jim. Love the possibilities for this peice. I was thinking about my dining room light. A tired stain glass with lightbulbs inside. Relpacing the glass with a larger version of your bowl would make an interesting fixture. Dan

[@SpragueWoodturning]

Yes, it sure would, give it a try! Thanks

[@user-pt5dd3ru5r]

媽媽at

[@EDVICHELLO]

You are just a great specialist! Thank you for the beauty that you create with your own hands! Kharkov Ukraine, Eduard Ihnatov.

[@SpragueWoodturning]

Awesome! Thanks Eduard from the Ukraine!

[@EDVICHELLO]

@@SpragueWoodturning Thank you maestro ...

[@billy19461]

I dearly love your videos! No BS just a lot of great information, great ideas, and beautiful bowls. Thanks for sharing.

[@SpragueWoodturning]

Thanks 🙏🏻

[@larryboysza2108]

Hi... I have watched this video 3 times from start to finish and the color green is by far my favorite color combination. It is so natural looking and beautiful..

[@SpragueWoodturning]

Thanks Larry!

[@johnkilborn3800]

A stunning bowl Jim! These resin bowls open up a whole new direction for your amazing talent!

[@SpragueWoodturning]

It sure does, thanks!

[@davidander1269]

An old technique I use for wet sanding is put dish soap in the water just a few props. it helps stop buildup on your sand paper and stops marking.

[@SpragueWoodturning]

Not a fan of wet sanding wood and resin pieces. If it were a total resin piece then sure, thanks

[@leeshilling83]

I’ll buy one of these from you. Thanks for throwing a price range out.

[@SpragueWoodturning]

Thanks, I hope to have them for sale this year.

[@immortalfae13]

@@SpragueWoodturning Sign me up for one of those too! lol!!

[@Gert-ox5qt]

Another stunning peace, but i'am honest...i do love the holes. It's authentic and it looks nice. Greetings from Gert Bouwman from the Netherlands Utrecht.

[@SpragueWoodturning]

Thank you very much!

[@lucasm8283]

Thank you for your detailed engagement/explanation through the entire process. Really informative, especially for me being a newbie.

[@SpragueWoodturning]

Great! Thanks 🙏

[@wiseone6862]

(Designer epoxy) love the clarity in this bowl. you've got me hooked.

[@SpragueWoodturning]

Great to hear! Thanks

[@shelearns]

That is BEAUTIFUL!

[@SpragueWoodturning]

Thanks 😊

[@hannahstraining7476]

I Want It!!!!! And it absolutely does not need to glow in the dark.

[@SpragueWoodturning]

Thank you very much!

[@judithmachin9888]

i just came across your video and I must say your work is exquisite. You are very detailed in your video which really helps to see why things are done a certain way. The final product is just breathtaking and an inspiration to what I have been wanting to take on myself. I will definitely subscribe and get some wonderful pointers from your work. I am just in love with your projects!

[@SpragueWoodturning]

Thank you Judith, I really appreciate it!

[@donnagiampietro180]

Very nice. Did not think I would like the green. With the green being a light color and the pearl, it turned out nice

[@SpragueWoodturning]

Thank you very much!

[@Headnsouth]

I just found you on KZbin and I absolutely love your videos. Congratulations on all of your projects, they are awesome. Really beautiful work.

[@SpragueWoodturning]

Welcome aboard! Thanks

[@fernandoangelaford1483]

Beautiful Piece !!!!!!! THANKS !!!!!! JESUS CHRIST IS LORD !!! AMEN !!!!!!!!

[@SpragueWoodturning]

Thanks

[@joallawestervelt6918]

Beautiful bowl. Good job.. Stay safe and take care. 😺❤

[@SpragueWoodturning]

Thanks 😊

[@williamsutherland1182]

You should try some Edge Glow pigment. It lines up the molecules to carry light from the flat surfaces to the edges. And they glow. Think about the orange, yellow and green clipboards that have glowing edges. Might be cool, might not work. We tried it in some golf balls, made for interesting honeycomb effect. down onto the core of the ball. Wasn't what we were expecting and not quite what we were looking for.

[@SpragueWoodturning]

Thanks for the info!

[@marcuswhite3628]

Lots of work payed off-it really is beautiful! Suggest giving it to Mama for Christmas... with love ❤️❣️ Marcus from Chesapeake VA.

[@SpragueWoodturning]

She’s already claimed it, haha. Thanks.

[@woodworkingbn8528]

Cool project 👍👍👍

[@MaxPaws]

What a beauty! It’s hard to beat burl for natural character. Love the translucent resin here too… maybe do that more often when you have such interesting wood to go with it?

[@SpragueWoodturning]

Thank you very much!

[@clivefelgate9802]

Really enjoyed watching your learning curve. Nice looking bowl though. As you say this opens endless possibilities. Enjoy the ride! 😃 Keep safe and well.👍👍

[@SpragueWoodturning]

Thanks Clive!

[@carolynmoon1821]

I think what you do is amazing. This is the 2nd video that I have watched and I could watch them all day. Your work is truly amazing.

[@SpragueWoodturning]

Thanks Carolyn!

[@jenniferschnieder6316]

Absolutely gorgeous!

[@SpragueWoodturning]

Thanks 🙏

[@MichaelHerrick-qn6ld]

I think the drill helped a lot to me but your the best in my book.

[@SpragueWoodturning]

Thanks!

[@milltek2]

Per your request, a shop tour would be nice.

[@SpragueWoodturning]

Got it, thanks.

[@wynnedraper4833]

Wow I love this bowl I'm making a table using Norwegian pine and cricket stumps plus a cricket bat I know it's not wood turning but I love wood turning your videos

[@SpragueWoodturning]

Thank you very much

[@lilrida649]

That was sweet! My 2 cents, don't get caught up on the swirl's just wet sand systematically all the way up to 2000 atleast, keeping it good and lubed. Then spin that polish with the drill attachment, I would not use the steel wool for the risk of the metal fragments and rust later on. I love your idea to just glow the burls! Did you pre charge the glow with a black light? Maybe extend the uv charge a little longer because it's inside the epoxy, was such a neat idea 💡 I look forward to seeing more videos thanks!

[@SpragueWoodturning]

In later videos I’ve sorted out any problem that I encountered in this video. At the time I didn’t have a UV light but do now, so when you charge it under the light it does glow, next time I will add a lot more glow pigment, thanks.

[@rogerreaney7746]

I think you are pretty hard on yourself. It's a very beautiful bowl! a lot of work goes into something like this!I can appreciate your effort & the end result. I'll be looking forward to your next project!

[@SpragueWoodturning]

Thanks Roger, I’ve got lots of resin casting videos now, thanks for watching!

[@timtravis5685]

That turned out absolutely awesome, Jim!! Especially for only your second resin bowl! Gorgeous piece!!

[@SpragueWoodturning]

It’s still a work in progress, thanks.

[@ilovelar]

Seriously - I keep coming back to this one. It has to be my favourite of yours. Just stunning!

[@SpragueWoodturning]

Awesome, thanks!

[@michellemcculloch]

Absolutely stunning work.

[@SpragueWoodturning]

Thanks 😊

[@carolbrady2482]

You create masterpieces left to you by the Master.

[@SpragueWoodturning]

Very true, thanks 🙏

[@nicoleadderley975]

Absolutely stunning, thank you for sharing! Can't wait to see more!

[@SpragueWoodturning]

Thanks Nicole!

[@judithfairchild8620]

I like the translucenook of the resin, the pieces of burl are l free after shaped which is really cool. Beautiful all together.

[@SpragueWoodturning]

Thanks 😊

[@randydunning7584]

Beautiful bowl ! I think that’s pretty amazing for your second attempt! Again thanks for sharing your craftsmanship with us!

[@SpragueWoodturning]

Thanks Randy!

[@lawrencemcnamara4321]

That is another beautiful bowl. Karen said Wow. I think it's over the top

[@SpragueWoodturning]

It’s a beaut!

[@romyonline]

Awesome, it's so beautiful.

[@SpragueWoodturning]

Thanks 🙏

[@43painter]

THIS one is extremely NICE !! The epoxy resin really looks like GLAS or like JADE !! Very nice !! The fact that you can also see the sides of the wood through the transparency of the resin is really beautiful. You have outdone yourself this time !! Chapeau !.

[@SpragueWoodturning]

Thanks from the others side of the river!

[@lewisdickens3293]

Ain't that beautiful!... looks like Continents floating around the sea - was that what you had in mind when you conceived of it ?

[@SpragueWoodturning]

Something like that, lol. I was just really looking for most effective way to use the burl pieces. Jim

[@jinglu1914]

非常有艺术性，很完美的展示木头另个角度美，像花开放有绿叶，有观赏性，加上实用牲，大家都会喜欢，，，，，

[@SpragueWoodturning]

Yes, I would agree It does look like a flower, thanks!

[@jamesrbrink9645]

It turned out beautiful, Jim! It reminds me of an old nautical map. Great job! Your camera takes really good videos. Can you tell me what brand it is? Thank you!

[@SpragueWoodturning]

Thanks! It’s actually a GoPro 7. The pictures at the end are from my iPhone 8+. I just recently bought a Sony 5100 and will be using it in upcoming videos as well. Jim.

[@marcuswhite3628]

I was going to say that looking down into the bowl reminded me of a kind of reverse world map. Also saw lots of people...

[@shereedwarennereedrana8349]

From one artist to another , I just want to say, jaw dropingly gorgeous. Amazingly creative! 👏👏👏

[@SpragueWoodturning]

Awesome, thank you so much!

[@relaxyourbee]

Good man:>) Thanks for being a great man, your a Beautiful person This has been a public message from Canada 2021.

[@SpragueWoodturning]

Lol, thanks eh!

[@jennierenzi8739]

I like the Phantom Pearl whirl. Super pretty bowl

[@SpragueWoodturning]

Thanks 😊

[@Reman1975]

Being British I tend to be quite reserved when it comes to showing emotion, I'm also quite quick to criticise imperfection. So I hope you can understand that when I say that this bowl could be the most beautiful piece of wood turning I've ever seen I'm not sycophantically giving praise over something mediocre. The colours just work together so nicely, the shapes suits the material incredibly well, and the ratio of wood burl to resin is perfect...... The only problem I see is that I fear you're going to have your work cut out making another wood and resin bowl that is as artistically stunning as this.

[@SpragueWoodturning]

Wow, thank you so much for your kind comments! It was a fun project and I’m learning more every time I do one of theses bowls. Your right, the pressures on to make the perfect project, lol. Thanks again.

[@carolewarner101]

@@SpragueWoodturning No pressure unless you make it that way. I say just keep having fun with the joy of creating!

[@neopeace7773]

Your creative wood turning work is be-You-T-full. Thx 4 sharing your artistic skills.

[@SpragueWoodturning]

Thanks for watching!

[@DrewnTiny]

I literally caught my breath when you said that you used that as firewood! Woodworkers are a weird bunch, to say the least.

[@SpragueWoodturning]

I’ve only got so much room and my wood hoarding is getting out of control, lol.

[@beckytaylor4318]

Beautiful I do not see any swirl marks. A great design great color turned out great one of the prettiest ones I’ve seen

[@davidicenhower8803]

@@SpragueWoodturning I'd love to have some of the cutoffs you have when you rounded the pieces. I'll pay for shipping to me if you have any extra little pieces.

[@SpragueWoodturning]

@@davidicenhower8803 sorry, I will be keeping them for future projects, Jim.

[@bgarrah3886]

Absolutely stunning piece of craftsmanship. The green epoxy works seamlessly with the burled wood, giving a real organic look. I would love to own one of these prized bowls. 👍🏻👍🏻👍🏻

[@breadiemercury7676]

There are some real talented people out there in the world This is a thing of real beauty and I loved watching the creative process it took to get to the finished work of art

[@SpragueWoodturning]

Thanks 🙏🏻

[@shantellamend8986]

I did it myself thanks to Stodoys.

[@SpragueWoodturning]

Stodoys??

[@NewEngland-vg7uj]

hello a lamp vase would look amazing with that design. love your work.

[@SpragueWoodturning]

Sure would, thanks!

[@beneditoalvesdasilva]

👏👏👏👍Vcs deveriam postar preço pois saberíamos quanto vale + ou - aqui ok

[@SpragueWoodturning]

Thanks

[@leemor6872]

Hi My name is Lee ,im from NB near Miramichi im starting my shop again with all new LAGUNA tools im going to try this time Lamp with epoxy and burls once i succeed ill let you in on my secret projects Congrat your doing nice work.

[@SpragueWoodturning]

Sounds great, you can send pictures to [e-mail] I was born and raised in Moncton!

[@davidander1269]

Scotch bright comes in different grits now I would try that. White is the finest grit

[@SpragueWoodturning]

Correct, thanks 🙏

[@christineingram55]

This is exquisite..it reminds me of leaves floating in water.I don’t turn.I just appreciate all forms of beautiful art..I hope your wife loves it ..She’s a lucky girl .I think this is an amazing way to use up your used pieces .The price you quoted is around about what others charge I believe..By the way some just put a couple of coats of resin on the bowls,and leave it turning while it dries .Gives a great shine too ..Stay safe ,love from the U.K. 🥰

[@SpragueWoodturning]

This manufacturer doesn’t carry a resin that you can do that with, thanks.