Woodworking Furniture Projects For Beginners || Cabinet How-To

  Рет қаралды 2,573

HoneyBadger WoodWorks

HoneyBadger WoodWorks

Күн бұрын

Пікірлер: 40
@jeanloreaud9282
@jeanloreaud9282 5 ай бұрын
Très joli travail avec de belles finitions,à bientôt salut Jeannot 🛠😉
@guyvangenechten6484
@guyvangenechten6484 5 ай бұрын
Very nice job looking very good!!!💯👌👍 Thanks for the information!!!
@pacojerte_ati
@pacojerte_ati 5 ай бұрын
How about an Amazon affiliate link for the products mention? (like soft close door hinges, sandpaper) I'm sure we could find all the products on our own, but that would be a small way to support your channel. We appreciate what you do and would love to show you some support.
@HoneyBadgerWoodWorks
@HoneyBadgerWoodWorks 5 ай бұрын
Thanks, that would be smart. I am so lazy with computer work that stuff like adding links is like pulling teeth for me.
@henrysara7716
@henrysara7716 5 ай бұрын
Thank you, Honey Badger you've explained mostly all in few clips👏👏👏.
@benjaqsonworkshop9974
@benjaqsonworkshop9974 5 ай бұрын
Not a big fan of painted furniture but you've made it look fabulous. I can't believe how dumb I've been balancing doors for so many years when I could have clamped a full width strip to rest on!!! Thanks for the mega useful tip!
@HoneyBadgerWoodWorks
@HoneyBadgerWoodWorks 5 ай бұрын
Usually I just leave the backer off and it's easy to do it from inside. But, for overlay doors this worked really well.
@norm5785
@norm5785 5 ай бұрын
This cabinet looks really good. Everyone stay safe, happy and healthy.
@grahamparsons6620
@grahamparsons6620 5 ай бұрын
Cabinet turned out great, I don’t mind spraying these days, kinda got used to it now, have to say I love the xtract disc’s switched to them about 18 months ago and don’t think I will be changing any time soon 👌👌👌👍👍👍🇦🇺
@HoneyBadgerWoodWorks
@HoneyBadgerWoodWorks 5 ай бұрын
I know, I sanded the entire bed frame I am working on with one disc and in half the time. They are awesome.
@Hog-g2z
@Hog-g2z 5 ай бұрын
Good morning 🌅, Honey B, That was a great job, well done, Looking 👀 forward to seeing more from your channel, stay safe, keep up the great work, France.
@HoneyBadgerWoodWorks
@HoneyBadgerWoodWorks 5 ай бұрын
Thanks
@xoxo2008oxox
@xoxo2008oxox 5 ай бұрын
I like the cubitron but found red diablo brand was cheaper in bulk and took off more material as needed. Awesome cabinet results! Hope the customer is happy!
@LASERMAN0405
@LASERMAN0405 5 ай бұрын
Always a pleasure to watch you work....
@georgewilmore7599
@georgewilmore7599 5 ай бұрын
Nice work! Setup’s are always tedious.
@petedazer3381
@petedazer3381 5 ай бұрын
Really nice! Stay cool!
@HoneyBadgerWoodWorks
@HoneyBadgerWoodWorks 5 ай бұрын
Thanks
@michaelcima5772
@michaelcima5772 5 ай бұрын
Looks great
@HoneyBadgerWoodWorks
@HoneyBadgerWoodWorks 5 ай бұрын
Thanks
@Laneworks7424
@Laneworks7424 5 ай бұрын
Very nice 👌
@demadre
@demadre 5 ай бұрын
Very nice job!
@HoneyBadgerWoodWorks
@HoneyBadgerWoodWorks 5 ай бұрын
Thanks!
@normanbott
@normanbott 5 ай бұрын
Looks perfect. I actually like paint ! I've run into problems with thin MDF (5 mm ) for panels when using water-based finish. The stuff we get in the UK tends to have surface fibres which never vanish, so I opted for Zinsser BIN primer 'cos it's shellac based, Can't use thin ply in the UK unless you can find a reliable source !
@HoneyBadgerWoodWorks
@HoneyBadgerWoodWorks 5 ай бұрын
Bin isn’t cheap but it does a great job.
@troyqueen9503
@troyqueen9503 5 ай бұрын
Morning from Vancouver Island 🏝️👍
@cabman86
@cabman86 5 ай бұрын
Looks great! Always a pro job.
@HoneyBadgerWoodWorks
@HoneyBadgerWoodWorks 5 ай бұрын
Thanks
@ankece6617
@ankece6617 5 ай бұрын
Well done.
@ltandrepants
@ltandrepants 5 ай бұрын
you have a great voice
@HoneyBadgerWoodWorks
@HoneyBadgerWoodWorks 5 ай бұрын
Thanks
@FODman51
@FODman51 5 ай бұрын
What is the brand of the he spray gun you are using? Can you use a 10-gallon pancake compressor?
@HoneyBadgerWoodWorks
@HoneyBadgerWoodWorks 5 ай бұрын
I honestly don't remember. I got it years ago. It's a campbell hausfeld and was like 30.00 on amazon. I'm sure you can go find the current model on there with specs, but I'm going to say and 10 gallon would be pushing it.
@Gazman299
@Gazman299 5 ай бұрын
If it's not to much trouble; What is the name of the sander protection pad that you mentioned? I've also switched to the cubitron and it's great, but I didn't know that I should be using something in-between it and my sander.
@HoneyBadgerWoodWorks
@HoneyBadgerWoodWorks 5 ай бұрын
It’s just a 3m interface pad, found it on Amazon. For flat surfaces you are fine. But I noticed doing curves and edges tear up those discs real quick, and the pad helps buffer them making them last longer.
@Gazman299
@Gazman299 5 ай бұрын
@@HoneyBadgerWoodWorks Thank you.
@sandman2651
@sandman2651 5 ай бұрын
Looks great
@HoneyBadgerWoodWorks
@HoneyBadgerWoodWorks 5 ай бұрын
Thanks
How To Refinish Furniture || Record Cabinet Remodel
19:59
HoneyBadger WoodWorks
Рет қаралды 1,3 М.
Woodworking Furniture Projects For Advanced Beginners
13:19
HoneyBadger WoodWorks
Рет қаралды 3,1 М.
BAYGUYSTAN | 1 СЕРИЯ | bayGUYS
37:51
bayGUYS
Рет қаралды 1,2 МЛН
Wall Rebound Challenge 🙈😱
00:34
Celine Dept
Рет қаралды 16 МЛН
1% vs 100% #beatbox #tiktok
01:10
BeatboxJCOP
Рет қаралды 34 МЛН
Bad Beginner Cabinet Tips
24:21
Lincoln St. Woodworks
Рет қаралды 1,5 МЛН
HOW TO MAKE YOUR HOME FUNCTION BETTER
15:09
Kelsey Romito DIY
Рет қаралды 180 М.
Woodworking Furniture Projects For Beginners
11:34
HoneyBadger WoodWorks
Рет қаралды 7 М.
Creative Couple’s Hand Crafted Norway Apartment, 60sqm/646sqft
10:51
NEVER TOO SMALL
Рет қаралды 166 М.
Woodworking || Building French Doors || How To
16:37
HoneyBadger WoodWorks
Рет қаралды 8 М.
15 woodworking basics you should know
13:20
DIY Montreal
Рет қаралды 1,2 МЛН
Corner Cabinet Reactions \ I Can't Believe They Said To Do This
17:38
Mark Tobin Kitchen Design
Рет қаралды 281 М.
BAYGUYSTAN | 1 СЕРИЯ | bayGUYS
37:51
bayGUYS
Рет қаралды 1,2 МЛН