Damascus Mallet from plastic bottles

In this video I'll show how I turn a bunch of plastic bottles into a Damascus pattern head HDPE carver's mallet to be used with my hand tools. It's a great opportunity for upcycling this type of plastic that we all have around. Processing HDPE is really tedious but the result deserves it. Besides, this material will last you more than any other wooden mallet head. In all previous videos about melting HDPE only show one way, using a kitchen or portable furnace. At this time I was likely to experiment using a tool that is present in most of the workshops: a heat gun. I may take a little longer, but It's easier to prevent damage to the plastic. During this video I also show how to repair small voids or defects. Also, I hope you enjoy this project. Leave your comments and questions. I’ll be pleased to answer all of them.
Scheppach woodworking machines: www.scheppach.com/products/Wo...
Tacklife tools: www.tacklifetools.com/
Support me on patreon: / wwb
Follow me on my social media:
/ woodworkingbarcelona
/ woodworkingbarcelona
This video is inspired by: • DIY HDPE Damascus Mallet

[@RealRuler2112]

That looks awesome! =) Few tips for you though, based on my experience working with HDPE. (I made a roller trailer for my boat with 28 rollers all made out of recycled milk jugs.) 1. A toaster oven set at 340 degrees F will be a lot less work than layering & waiting for the heat gun to melt the plastic together. Using the heat gun, make sure you don't overheat the plastic or are outside - HDPE starts off-gassing toxic fumes at about 400 degrees F. 2. If you apply epoxy inside the female end of a mortise/tenon joint, more adhesive will stay in the joint. Applying it to the male end and then shoving it in has the effect of the edges of the female side scraping off epoxy which might be useful down inside. 3. When turning something that's heavier on one end than the other on your lathe, you'll get less vibration if you put the heavy end nearest the headstock. You certainly have more guts than I do! I tried cutting round stock how you did on my bandsaw one time - saw grabbed the log, spun it around about 729,000 rpm, threw it across the shop, and the saw almost bit me. I'm certainly not one to try telling anyone how to work in their own shop, but please be careful - I like your videos too much for you to get hurt & not be able to put out more. ;-) =)

[@WoodworkingBarcelona]

I truly thank all the time you inverted in share all that useful information. I'll keep it for the next time working on HDPE, which is going to be really soon. About your concerns ofsafety, my workshop has a really big door (like 4m tall barn door) always open while I'm on it, also with a window open to produce air flow. I'm also wear almost all the time 3M FPP3 dust mask. Best regards!

[@obviouslyblack]

This is such a cool and educational comment

[@ottodidakt3069]

finally found the good side of KZbin : real people sharing useful info and being respectful. thanx both for the tips

[@pookieone631]

Otto Didakt amen

[@mrbrown6421]

729,000 rpm? That is around the frequency of AM radios (535-1605 kHz) Or did you intend this as humor? The only time I saw anything move that fast in my shop was when the wife called me for dinner. (insert laugh track...)

[@NoIntroTutorials]

That last shot with the mallet and the knife was absolutely perfect.... The angle, the lighting, the use of the tools.

[@WoodworkingBarcelona]

Thank you Arturo. That was also my favorite shot of the whole video. Regards!

[@khomol]

Agreed

[@RobMacKendrick]

I've seen a lot of plastic mallet videos, but this transcends the lot. This is straight-up high craftsmanship, equal to anything worked in hardwood. Thanks for the beautiful video.

[@WoodworkingBarcelona]

I trully thank you Rob. Regards.

[@duncanx99]

Finally I've found someone in Catalunya that does woodworking for a hobby...

[@WoodworkingBarcelona]

Haha, I'm sure I'm not the only one ;D

[@kingofcastlechaos]

I'm a professional woodworker (like I am sure all the commentors are) and I think this is absolutely AWESOME! I have wanted to melt some plastic into a usable object, but there is not a lot of down time in our shop. I am walking in after the holiday break and setting up a small run of these. I'll give you and this video credit for the inspiration. Best regards from Texas.

[@WoodworkingBarcelona]

Thank you man! I'll hope to see your mallets some day. Please let me know when you have done. Best regards!

[@chaseybears]

I don’t understand why people thumbs down these videos, but leave no comment to justify it....to think out of the box and create something by hand over time deserves a respectful pat on the back.....well done chap, good effort 😉👍

[@WoodworkingBarcelona]

Neither do I. Anyway the comments like yours compensate for those thumbs down. Regards and thanks for your support!

[@marcmckenzie5110]

This kind of out-of-the-box thinking always impresses me, not to mention the craftsmanship. I won’t ever likely have access to these wonderful tools - but I would surely support a Kickstarter campaign to see someone build a business around tools like this! (Extra kudos for the artistic shot at the end of using the mallet to drive a chisel carving that perfect curl of wood!)

[@WoodworkingBarcelona]

I feel rewarded with this kind of comments. You keep me doing this. Best regards!

[@jaredbradley4095]

Extra kudos guy is the same guy lol

[@musick333]

Marc McKenzie ...isn‘t it just advertising for wonderful tools?

[@craftedworkshop]

Man, this turned out so freaking cool! I really want to try this now, I absolutely love the look.

[@WoodworkingBarcelona]

Thanks Johnny, it's good to see you again. Thanks for come and comment. I'll be glad to see your HDPE mallet when is done ;D. Regards!

[@ZacJones]

That's so mesmerizing to watch you squeeze the metal into that can, turned out really nice!

[@WoodworkingBarcelona]

Thanks man! It's no metal at all, its called HDPE (High-density polyethylene). Regards!

[@donaldduck4867]

Sanding and polishing on a lathe is a form of happiness!

[@WoodworkingBarcelona]

Fully agree 😁

[@2002Framer]

Saving the planet in a beautiful and practical way. Thank you for posting 🙏🏻

[@WoodworkingBarcelona]

Thank you!

[@MRcustomcrafts]

Fantástica idea compañero, muy ingenioso 😳!!. Y la mesita de noche....Wow a mi pareja le ha encantado, una maravilla y un trabajo finisimo. Saludos Crack

[@WoodworkingBarcelona]

Muchas gracias compañero! Esas mesitas de noche me dieron mucho curro, sobretodo porque cada una tiene sus detalles particulares. Un abrazo y gracias por comentar!

[@MakingHuertasstuff]

Impresionante esté damascus y lo bueno que tiene que lo puedes reparar en cualquier momento. Buena manera de reciclar. Un saludo

[@WoodworkingBarcelona]

Gracias tío! Ya ves que los que no sabemos de metal nos apañamos con el plástico jeje. Ahora en serio merece la pena tener un martillo de cabeza de HDPE o Nylon. Se trabaja mucho mejor golpeando formones. No dañas los mangos de madera y responde casi casi como un dead blow mallet. Un abrazo!

[@gabriela150678]

@Woodworking Barcelona HOLI ME GUSTO 3L V1D30

[@heribaldpudelich]

Wow, I liked the way it was filmed and presented without music just the sounds of working. The effect that comes by trading the handle with wax (I guess) is so satisfying :) great work, thanks for the upload!

[@WoodworkingBarcelona]

Thank you for your positive feedback mate.

[@randallmccorquodale3290]

I must admit that this idea would never have occurred to me. Kudos.

[@Blueshirt38]

Gotta admit, I didn't think I'd like your style of video production at first, but you won me over. Very well done.

[@WoodworkingBarcelona]

I'm glad you finally liked it 😉

[@Redhunteur2]

If you think you are so awesome because you can make stuff like that, well... You are. Great stuff. Love your work.

[@WoodworkingBarcelona]

Thanks!

[@mihumus]

Awesome video and awesome details. Beautiful mallet Lluís!!

[@WoodworkingBarcelona]

Thanks for come and comment my friend. I kind like to show with more detail all the steps of the process. Regards!

[@chalkychoochoo2304]

I have no idea why I watched all 12 mins, 11 seconds of this video, I only know I couldn't stop.

[@WoodworkingBarcelona]

Nice! Check out my recent videos. Hope you enjoy them as well.

[@magicdaveable]

Very cool mallet. Now I can cut all of those plastic jugs into strip an fire up my heat gun. It's much better than burning them in the trash pit. I can already visualize mallets with swirling colors. I have about 50 empty jugs in blue, yellow, white, clear, and red too. A marbled effect would look really cool. Thanks for the incite.

[@WoodworkingBarcelona]

That would be interesting to see. Regards David.

[@thefilthelement]

Love the use of the mallet to build the mallet

[@WoodworkingBarcelona]

Mallet life cycle.

[@FSAM2132]

Always amazed at what you can create with your own hands, the right tools & a little imagination... Looks great.. As someone else said..love to see that with coloured plastic in it.. More please...

[@WoodworkingBarcelona]

Thank you Alan for your words.

[@forest487]

This is great looking into plant based glues and organic varnishing oils is a great way to make woodworking more sustainable

[@thebaldcrafter]

That golden ratio carve shot at the end though... Golden!!

[@WoodworkingBarcelona]

Thanks mate! IMHO this is the best shot of the whole video. Regards!

[@traumashamankinggenie6168]

Dude I was so into this video I didn't realize how close I was to my screen lmao

[@WoodworkingBarcelona]

lol, that's great!

[@GetHandsDirty]

This is a super interesting project! I loved the video and the recycling of the plastic. Also, the Damascus effect is top notch!

[@WoodworkingBarcelona]

Thank you Chris! I've made two other HDPE mallets a year or two ago, but they were monochrome (no visual interest at all). When I realised that the milk bottles that we consume had 2 colors (white/gray) it definitely moved me to try again and I fell in love with this beautiful Damascus pattern. Regards!

[@Taylor-xh8uh]

kinda looks like stone

[@perseo842]

Get Hands Dirty h

[@Nico-kj8tp]

Recycling is a big word considering all the electric energy used to melt it..

[@tri11est]

Nico....shut up

[@cathyjones3403]

You are a very talented young man . My goodness I’m impressed at how you used the tools you have on hand . Heat gun was brilliant as was the way you used all your tools. 👏👏👏👏👏👏👏👏👏👏

[@WoodworkingBarcelona]

Thank you Cathy! It's very rewarding to hear that. Thanks for support my work. Best regards!

[@caseydoremus5324]

Thank you for this! This is such a great idea. I have wanted to work with plastic but didn't feel like I had the right set up for it, but this is awesome

[@Scythra]

Looks like a WWII German Stick Grenade. "Fire in ze hole."

[@dth1079]

We didn't call it a potato masher for nothing!

[@rich1051414]

stielhandgranate

[@CelticSaint]

Achtung!!

[@alaskanalain]

I was just about to make the same comment.

[@drachenfeuer5042]

That what all the guys said about my whore of an ex wife after she shared her clap with hundreds

[@JohnHeisz]

Very cool!

[@WoodworkingBarcelona]

I truly thank your visit and comment John! Regards!

[@southligts]

MAN this has to be the coolest thing I've seen in a while, my upcylcing senses are tingling. Heading to the workshop right now :D

[@WoodworkingBarcelona]

I'm glad it inspired you. Regards!

[@ArtStreet52]

Thank you for sharing !!! Really nice idea for a Mallet!

[@WoodworkingBarcelona]

Thanks, I'm glad you like this idea.

[@CanalMiguelLopez]

Qué trabajo más exquisito, en todos los aspectos del vídeo. Impresionante!

[@WoodworkingBarcelona]

Muchísimas gracias Miguel! Me alegro que te haya gustado tanto.

[@gabriela150678]

@@WoodworkingBarcelona Estuvo Genialisimo!

[@DenAndMug]

This is soo cool!! What a great use of plastic 😀Turned out awesome! We love the patterns it created!

[@WoodworkingBarcelona]

Thank you, I love to use it.

[@arteymanafmh4785]

Me he quedado flipando!! Ole tu !! Gracias.

[@WoodworkingBarcelona]

Gracias por tu comentario!

[@angelika6165]

My english sucks and I have no idea what mallet is, but I'm a huge fan of the way melted plasic bottle looks like. It's beautifull. And it's few less botttles in the ocean. P.S. -Finally i've found ASMR which don't annoy me. I'm staying here.

[@WoodworkingBarcelona]

Thank you for your words Angelika!

[@abhishekgourav6144]

Stielhandgranate with custom skin...

[@WoodworkingBarcelona]

Lol

[@swsdnnogdner4726]

abhishek gourav lmao what

[@roboactive]

@@swsdnnogdner4726 Stielhandgranate is the german ww2 stick hand grenade.

[@swsdnnogdner4726]

Roblox oh

[@davidbraucht544]

awww you beat me to it

[@Mikhandmaker]

Amazing job!!!! I love the look👌👌

[@WoodworkingBarcelona]

Thanks man! ;)

[@MrCestak]

This idea is so badassed. Need to try this on my lathe. THX

[@krashunburn]

What a great project! I am definitely going to give it a go, but I cannot fathom the 436 hopelessly negative people who gave the video a 'thumbs down'. Probably Pfeil and Narex employees who see a potential drop in mallet sales.

[@woodworkingbarcelonaii9413]

Thanks Tony. I guess many of those thumbs down are from people who are not agree with my use of the word "Damascus"... I don't care about that. The purpose of my videos is far away from that kind of discussions. Regards!

[@heyimamaker]

It's Daplasticus 🤓 Turned out great!

[@WoodworkingBarcelona]

Lol thanks!

[@mcremona]

Love it!!

[@WoodworkingBarcelona]

Thank you Matt!!

[@Danirio96]

Quin nivell d'espectadors que tens :O

[@WoodworkingBarcelona]

Dani Doncs sí!

[@christiantubach-stevenson9382]

Yes ME TOO

[@Metal-wood]

Very cool!! I love the random patterns of the plastic 👌🏼

[@WoodworkingBarcelona]

Thanks! I found those really beauty.

[@THEAPRILFOOL-1983]

One of the best mallets of seen yet

[@WoodworkingBarcelona]

Thank you!

[@jmakes3745]

Really interesting project - I definately think this material has a lot of potential!

[@WoodworkingBarcelona]

Thanks. I bet this is not my last project with HDPE.

[@IEnjoyCreatingVideos]

Great job on the mallet friend! Thanks for sharing the video.😎👍JP

[@WoodworkingBarcelona]

Thank you JP!

[@IEnjoyCreatingVideos]

You're very welcome Friend! 😎

[@valterleao6795]

PARABÉNS...., meu Amigo, ficou maravilhoso o malho, quanta habilidade e carinho!!! Obrigado por compartilhar comigo seus conhecimentos. Abraço aqui do Brasil 🇧🇷

[@WoodworkingBarcelona]

Obrigado!

[@thra5herxb12s]

Very simple and very effective, and very enjoyable to watch 👍

[@WoodworkingBarcelona]

I glad to read that. Thanks

[@jeffwolf8018]

Where in the hell do you get a badass clamps like the ones you're using those are the most impressive clamps I've ever seen. I've been doing this for 40 years too.

[@WoodworkingBarcelona]

Those are the most badass clamps I've ever used, the Maxipress from Piher company.

[@dekebell3307]

Wow. Just wow. May be one of my favorite projects of yours. Can't wait to try this! (Yes, I shamelessly attempt to copy your projects.) Thanks for the inspiration and thanks for sharing.

[@WoodworkingBarcelona]

That's awesome! I feel very rewarded to be able to inspire other people. Please feel free to share your experiences and projects with me via Facebook or Instagram. Best regards!

[@oojagapivy]

Cool look and an awesome use for the old bottles

[@WoodworkingBarcelona]

Yes indeed. Thanks for comment!

[@carvencheddar8535]

Absolutely incredible!

[@WoodworkingBarcelona]

Thanks Charlie!

[@ScrapwoodCity]

Awesome work man! Really cool idea to use the heatgun that way!

[@WoodworkingBarcelona]

Thanks mate! It's not the best tool to do so but I have no oven on my workshop so I had to improvise. Regards!

[@royward1952]

Will that only work with certain types of plastic? And would mixing in a 3 part epoxy as a binding agent increase strength or hardness?

[@WoodworkingBarcelona]

I've no experience in other plastics. No need to use other than 2 part epoxy. The bond between wood and HDPE is pretty strong. This mallet has been abused and it holds fine.

[@gr8dvd]

HDPE melts at a lower temperature than other plastics... so easier to melt/mold, and dunno, but guessing lower temp = less risk of toxic fumes.

[@dougfitz-randolph7232]

Those are some nice clamps! (Like the mallet too, and love the plastic melting/forming process. You've inspired me. Thanks!)

[@WoodworkingBarcelona]

Thanks, that's my goal. I'm glad it inspired you.

[@Ibaneddie76]

Wow man very impressive. Love seeing people use recycled material and make it look like it wasn't. I'm gonna borrow this idea I just got a bunch of new gouges and you can never have to many tools to bang them with.

[@WoodworkingBarcelona]

I'm glad this project encouraged you to make one by yourself. Good luck!

[@raysmith1992]

Thank you a lovely mallet and good technique 😄👍

[@WoodworkingBarcelona]

Thanks you Ray!

[@jackson84694]

Nicely done!!! Thinking in terms of color varieties of the plastic. And PLEASE wear eye protection, I want to see you do more videos.

[@WoodworkingBarcelona]

I do, thanks for your concerns! Best regards Jay.

Que pasada!

[@WoodworkingBarcelona]

Gracias Juanki. Me alegro que te haya gustado.

[@apistosig4173]

Very Very Very clever. Hats off to you!

[@WoodworkingBarcelona]

Thank you!!

[@2AKNOT]

Great camera angles. You are a talented videographer and woodsmith. Thanks.

[@WoodworkingBarcelona]

Thank you for your kind words Bakersman!

[@JH-lo9ut]

Cool project. I'm gonna be the boring teacher guy though, and point out that it's cuite dangerous to cut cylindrical objects om the band saw. It's not obvious why, but whe have had several accidents in my shop, when the band catches and the cylinder starts to roll. If you want a safe setup: support the cylinder in a block of wood vith a V- shaped slot, or a bord screwed on a piece of plywood, making an upside down T-profile. The point is to support the cylinder or pipe at two points of it's circumference. This prevents rolling. Btw, splitting a cylinder is even more dangerous.

[@WoodworkingBarcelona]

Thanks for your thoughts!

[@garrettswoodworx1873]

Amazing! I'm going to have to try this rather than buying a new woodcarving mallet!

[@WoodworkingBarcelona]

Sure! I recommend you.

[@franciscogomez6279]

what a simple fun idea! your a craftsman sir! Thank you

[@WoodworkingBarcelona]

Thanks!

[@miguelangellm1445]

Increíble! Menudo proyecto tan trabajado y vaya talento el tuyo!

[@WoodworkingBarcelona]

Muchas gracias Miguel Angel.

[@axelleaxl.5315]

Really nice :) But safety glasses ;) Thanks for this vid !

[@WoodworkingBarcelona]

Thanks for the advice 😎

[@axelleaxl.5315]

Here you are ;-) What do you use to remove grease matter from HDPE Bottles? Is water and soap strong enought?

[@biqqu1698]

Hello from 2019 and that looks like a german stick granade

[@WoodworkingBarcelona]

Yes but was totally unintended.

[@jeffarcilla1489]

Amazing! So practical! And beautiful!

[@WoodworkingBarcelona]

Thanks for your comment!

[@David-xu3yk]

This is so cool! It's a great upcycle too! ❤

[@WoodworkingBarcelona]

Thank you David.

[@PeaceDeath.]

Off-screen when cutting plastic Darth Vader breathes. 1:10 :-))

[@WoodworkingBarcelona]

I can be exhausting to cut by hand all those plastic bottles, you know.

[@WillBravoNotEvil]

Woodworking Barcelona I've seen many office shredders that say they can handle CDs & credit cards... Wonder if you could find one used? Or even inoperable, sold as salvage. I've brought many a curb-find back to life. 😎

[@SwissCoco]

You were supposed to fix the chip with ramen lmao smh

[@Linuxdirk]

I don’t get this dumb trend … this doesn’t even work let alone being durable.

[@WoodworkingBarcelona]

I'm kind bored about that... I prefere to eat ramen.

[@WoodworkingBarcelona]

Totally agree

[@capinoy123]

Great work! Only hand tools! Love it!

[@WoodworkingBarcelona]

Thanks John!

[@KitoMarchetaria]

Incredible ! Thank’s for sharing !

[@WoodworkingBarcelona]

Thanks Kito!

[@jffsprs]

Unsure if anyone has mentioned this, but you could probable run those wide plastic bottle strips through a paper shredder machine. Might save some time. Great video, Nice talent.

[@WoodworkingBarcelona]

Hi thanks! Yes indeed, many people has given me the same advice. I appreciate that. Regards!

[@darrianweathington1923]

It's a Zaku 2 (Stielhandgranate) stick granade

[@WoodworkingBarcelona]

It looks pretty similar but I has a better use I think.

[@GediSpock]

Excellent job sir. I particularly liked the clamp for the heat gun. I shall be using that too. Thank you.

[@WoodworkingBarcelona]

Thanks you!

[@Rustikuswood]

Loved you video, the way you do things, with such a calming effect...keep it up!

[@WoodworkingBarcelona]

Thank you very much!

[@BubblewrapHighway]

Sure do love microplastics.

[@WoodworkingBarcelona]

👍

[@xsilentpulse123]

That's it I'm getting me mallet.

[@WoodworkingBarcelona]

👍

[@leealmeida929]

Fantastic & inspiring, thank you for sharing the process

[@WoodworkingBarcelona]

Thank you for your comment Lee.

[@bearmeister98]

CRAZY cool project, love it...

[@WoodworkingBarcelona]

Thanks!

[@MrSamodov]

while the plastic was liquid, you could immediately insert the handle

[@WoodworkingBarcelona]

Yes I could do so but I do trust better the way it hold with epoxy.

[@phookadude]

Actually turning the shank (with protrusions to grip the plastic) along with a handle and a disk to compress the plastic as one unit and then refining the whole thing after the plastic hardens on the lathe would save a lot of materiel and steps. I'm not sure epoxy does well with hdpe as it's kind of notorious for being incompatible with most other plastics.

[@mattjohnston5807]

@@phookadude Maybe this is a project meant for fun and not mass production so he does it the way he likes to? lol

[@jasonm2477]

@@WoodworkingBarcelona your trust is misplaced almost all epoxies wont bond to HDPE, HDPE is what i use with epoxy to protect thigns from it sticking..

[@richardparsons7012]

Have you used the mallet a lot? If you have, has the plastic held up to use well? Nice project.

[@Falney]

From Ingot to Mallet with only a wood lathe and a heat gun. Eat that Alec Steele.

[@WoodworkingBarcelona]

Haha

[@S8tan7]

Leave Man-Puppy Alec alone! 😂

[@barias9999]

¡Excelente idea! Gracias por compartirla.

[@WoodworkingBarcelona]

A ti por comentar.

[@goddale2002]

And with the patience of Moses you have a beautiful mallet.

[@WoodworkingBarcelona]

Thanks Leon! Real patience is for filming and editing the video

[@foyjamez]

I think you should have feed the sheets through a high quality cross cut shredder.

[@faithfulchica1861]

My thoughts as well.

[@WoodworkingBarcelona]

Oh please, send me some of yours. It would be great because I dont have one.

[@foyjamez]

I just have the one. I send paper to the compost bin and then the garden. Now a new idea.

[@befree9438]

Hey, bro! Use the goggles, please! Great work)

[@WoodworkingBarcelona]

I usually wear them.

[@JamesStreetStation]

BRAVO! Gorgeous work!

[@WoodworkingBarcelona]

Thank you James!!

[@IronGordon]

You had me worried there for a minute with the heat gun and screw driver! Came out looking awesome !

[@WoodworkingBarcelona]

Haha 😬 I did not fail. It's really easy to patch those bubble air holes with more HDPE. Regards!

[@sonja_rademacher]

Me: Why do you talk so slowly? Him: It's because of the plastic fumes. 😁

[@WoodworkingBarcelona]

FPP3 and well ventilated room here, thanks.

[@sonja_rademacher]

@@WoodworkingBarcelona I was just kidding. 😁

[@PIHERCLAMPS]

Ya tenía yo ganas de verlo! Una golosada 💎 Lluis ¿Conoces la Iniciativa Preciós Plàstic de Valencia? ¡esto les enconataría! Trabajan el tema del DIY de reciclaje de plásticos de forma comunal. Han desarrollado maquinaria para el triturado y fundido del plástico. Pero la solución que has usado es muy elegante. ¡Un puntazo la reparación del plástico en pleno torno! Da gusto ver como los sargentos Piher son usados en proyectos como este. Gracias

[@WoodworkingBarcelona]

Y yo de sacarlo, por fin! Me alegro que te haya gustado. Pues no los conozco directamente pero tengo un buen amigo que colaboró con ellos en un proyecto. Lo bueno del HDPE es que resulta muy fácil de reparar. Vuestros sargentos se me hacen ya imprescindibles para cualquier trabajo de mediana/alta exigencia en el taller! Un abrazo!

[@raptors3164]

Excellent workmanship and beautiful mallet.

[@WoodworkingBarcelona]

Thank you!!

[@papixulo2]

BRAVO!! Muy bien todo el proceso, y la solución al accidentillo. Muy creativo. 👏👏👏👏👏

[@WoodworkingBarcelona]

Gracias Jordi! La verdad es que el HDPE es bien facil de reparar. Gracias por pasarte a comentar!

[@walley2637]

i was with ya until you killed a tree to make the handle... just kidding :) good work, gives me ideas!

[@WoodworkingBarcelona]

Haha just small branch from pruning. Thanks for comment

[@tjj300]

A paper shredder might take some of the tedium out of cutting up the bottles into small pieces.

[@WoodworkingBarcelona]

Sure but I've don't have one.

[@MargoSki1959]

You are so talented!!! 🇵🇱🛶🌈👩‍🍳🇺🇸

[@woodninjaswoodturning3787]

Excellent work and recycled ......Awesome

[@jur1963]

Nice. You have just made german ww2 hand grenade

[@royward1952]

The correct term for that is plamacus.

[@WoodworkingBarcelona]

Lol hahaha

[@roseworld8091]

Está genial el trabajo, además ecológico. Muy bueno!!

[@KatAdair]

Absolutely beautiful! Nicely done...

[@WoodworkingBarcelona]

Thanks Kat!