Рет қаралды 18,430,651
I used three hydraulic cylinders to build the hydraulic log splitter. Two smaller cylinders drive the knife and the wood feeder, the largest hydraulic cylinder splits wood. Everything is connected to two hydraulic distributors, a single-section distributor designed for log splitter, and a universal two-section distributor. For two smaller hydraulic cylinders I had to install valves to slow them down because they were moving out too fast. The valves make the pump heavily loaded but the cylinders work slower. I connected the whole machine to the hydraulic power pack I made in the previous video.
Thanks to the feeder and adjustable blade the work is very fast and not tiring, the splitter has a lot of power and can handle the hardest wood without any problem
Start supporting this channel and you will get these bonuses:
/ @workshopfromscratch
Tools:
Drill amzn.to/43dE6hO
Angle Grinder amzn.to/4a70xry
Other tools amzn.to/3IAQE9N
Camera:
Drone - amzn.to/4a5TvTP
Camera - LUMIX GH5M2 amzn.to/3UR6Niw
LUMIX G VARIO LENS amzn.to/49IfVdq
Camera - LUMIX G85 4K amzn.to/4a4deTY
GoPro Hero10 amzn.to/3uThjvm
Hydraulic power pack : • Making Gas Powered Hyd...