Making Rotary Welding Table

The rotary table is powered by an electric motor from the mobility scooter, the tilt of the table is driven by the wiper motor from the Audi A8 B4. I powered the engines with a 24v / 12v 16.7A two channel power supply, I used a 40A voltage regulator to set the rotation speed of the table top. The table top has a diameter of 800 mm and a thickness of 8 mm, thanks to which the table's capabilities are very large, the table can be used as a welding positioner, as an assembly table or a plasma cutting table, Repair work can be done on the table, and thanks to the electrically adjustable table top, the work is less strenuous.

[@mrb4342]

Amigo, I don't know what kind of Genius you are to work metal, but let me tell you that you are one of the best and how we deserve in our Mexican land. You are !!UN CHINGON AMIGO!!

[@TinMan0555]

Having seen your work in the past, I knew it would be a well constructed and useful tool. But, when you added the tilt feature, it went over the top! Well done Sir!

[@Kokosha3110]

Молодец! Супер стол, мечта сварщика! Инструмент и станки твои так и просятся творить чудеса

[@oddjobbob8742]

You never cease to amaze and inspire and entertain. I only wish you would speak to us as you create. Thank you again for sharing your brilliance! At about 14:30 I realized you were making the work table. I thought, “that might be thick enough if it were 10-12 inches (25-30 cm) or so. But 2 ft? No way.” Then you very creatively used the corners to make buttresses. I thought, “way.”

[@anands6127]

20:08 Made my day.What a wonderful welding. This project is much useful than I thought earlier.I have to say this tool /machine is wonderful. keep it up 👍

[@normandjosebustilloherrera2928]

Está excelente su invención, adelante y ánimo, eso es otro nivel. FELICIDADES.

[@thebonermaker]

now having a rotary table makes way more sense after watching this. thank you. I have a motor with a worm gear box that I've been thinking for years what I should do with it. I think building one of these is the plan now.

[@gilmartramontin2891]

wetct

[@edgardoeliecervargasvislan6295]

L

[@Pedro72740]

@@Inspiracion_ you have crabs

[@Pedro72740]

I don’t think you understand. I didn’t come here to save Rambo from yo. I came here to save u from him.

[@chrismaestrelli3943]

Seu trabalho é incrível, parabens

[@_Waldezas]

I was surprised that you did not use thrust bearings for axial load of the table. Other than that, thank you! Your videos are super awesome!

[@Marcelo-56]

Of all the people I see working on KZbin videos, you 👈 are the best qualified professional, your projects are very well developed and they are very useful complement tools👍

[@WorkshopFromScratch]

Thank you 😁

[@user-zy7mf9qd7c]

Очень круто. Спасибо за видео. Вы вдохновляет многих. Удачи.

[@exposingthedarknesswiththe9190]

*VERY CLEAVER AND FUNCTIONAL FOR MANY JOBS...WELL DONE!!*

[@WorkshopFromScratch]

Thank you 😁

[@harvindersingharora3845]

Fantastic! Multi purpose table which gives, winning edge for precision projects.

[@Pedro72740]

No it doesn’t.

[@martinibarrola7789]

Un genio 👏👏👏 capo capo !!!! Un saludo desde Argentina

[@user-jb5oy1xz1h]

จรัญ/รอดตะเภา/ดี/ดี

[@rickpalechuk4411]

Awesome build! That unit is so pro man! Great vid, thanks for sharing. Cheers

[@WorkshopFromScratch]

Thank you :)

[@MrTIGERH1752]

Excellent build. I loved the use of materials, and the construction using basic tools available to everyone. This is a very inspired project. Thank you for sharing it with us. Tim

[@WorkshopFromScratch]

Thank you 😁

[@poontang7546]

Sorry you are wrong, the video is edited . No real fabricator will rely on those mag squares for a start. No showing of plans & drawings either , try to build something like this out of your head , not impossible but very improbable.

[@ernestmurphy3898]

@@poontang7546 Poon Tang you are wrong most fabricators use and verify the mag squares to start with. The editing was done well to reduce the length of time it took to buy and load and unload the metal from the truck and removing the gear motors from the vehicles and crimping the lugs on the ground straps. He did show you how he drilled and painted. I am favorably impressed with his editing skills as well as his engineering skills.

[@montwolfman]

Absolutely top notch. Innovation;10+. Craftsmanship; 10+. If it's worth doing, do it right and this weld table is all about rugged and versatile. I would pay serious $ to have it in my shop.

[@WorkshopFromScratch]

Thank you 😁

[@reaper060670]

When u marked out that SQ piece of steel plate and cleaned it then drilled the holes and cut those perfect slots and rounded the table off by hand with the grinder I could only say WOW!!! Oh my GOD this guy is phenomenal.. Ur builds are so inspiring my friend.. As I'm typing these words I'm actually smiling to myself. U have built some of the best things I've ever seen in videos about metalwork.. I wonder have u ever thought about building a full on milling machine CNC style of even ur own Lathe?? I'm certain it would be another great build from ur good self my friend.. I would love to be learning from a teacher like u if u were teaching this art.. It's a pleasure to watch ur videos pal.. Keep up the great work .. I'm spreading the word as often as I can too. 4.2mil views on this video and I'm only catching it today. That tells u how new to this I really am bro.. LOL.. Salute from Dublin, IRE..

[@mauriciomendez9081]

Excelente trabajo eres muy preciso en tus trabajos mucha experiencia

[@gustavoadriangiudice397]

Gracias amigo por compartir sus trabajos. Viendo su video uno se da cuenta de todo el trabajo que lleva una maquina y porque tienen el costo que tienen aveces. Saludos desde Mendoza Argentina.

[@fonhollohan2908]

That should come in handy for lots of forthcoming projects. nice job! I use to use one of those for welding up lift rods for heavy Equipment.

[@user-bd2yt6rf6e]

Professional and capable man. Blacksmith, electricity and controllers. You didn't leave anything to others wow

[@007paulhopper]

Seriously impressive, seriously impressed. Well done sir

[@benmiller5015]

Awesome build. I can see that coming in handy on future builds. Mad genius

[@WorkshopFromScratch]

Thank you 😁

[@user-hy6zn9nl3j]

Очень интересный вариант,у автора талант! Жаль что не могу на его языке высказать благодарность за идею.пусть удача ему сопутствует во всех его начинаниях!

[@WorkshopFromScratch]

Спасибо 😁

[@ronwhittaker6317]

best I've seen ya do so far and you have done a lot of good stuff useful stuff. I think this gets at a production level more than all the other stuff so far. near-perfect wields with little effort after the real effort is done is invaluable you could run this thing while getting a lot of little stuff done around the shop. in short, I LIKE IT!

[@wittemotor100]

Excellent work! Thanks for sharing!👍

[@WorkshopFromScratch]

Thank you 😁

[@Thewatson77]

Man this is a SERIOUS piece of machinery! Very well planned and executed 🙌🏻

[@WorkshopFromScratch]

Thank you 😁

[@michalrakowski3720]

Bardzo dobra robota👌👍👏👌👍👏 super ogląda się twoje filmy pozdrawiam

[@WorkshopFromScratch]

Dziękuję 😁

[@pierdolio]

I'm stunned at how well you've thought out this project . Keep up the fabulous work.

[@WorkshopFromScratch]

Thank you 😁

[@11sprials11]

You are a master builder! Awesome!

[@WorkshopFromScratch]

Thank you 😁

[@lyteyearz5810]

This is the kind of content I hope to find on KZbin. Excellent work!

[@holiveira5743]

Parabéns! Incrivel!

[@jiwbink]

PLENTY STOUT ENUFF!! GOOD ON YA!

[@metallrabotka7823]

Основательно и добротно! Не совсем понятно зачем такой толстый металл для корпуса, но видимо так задумано! Классный стол, молодец!

[@dougdroneflyer5807]

Excellent Job! ... I just wish I had all the metal for all the projects he does! ..LOL! .. Great Video .. Keep up the "GREAT" work!

[@alexkiller9051]

руки золотые, голова на месте👍

[@tamerlanhan35]

Очень крутые инструменты.А главное,что все работает очень точно.

[@user-fp6sz6lp9f]

Ну по сравнению с заморчью функционал ни о чем.

[@Patriottoo2]

Amazing, useful tool! And, it took only a little over 20 minutes to build. I should have mine ready to use by tomorrow. :-)

[@WorkshopFromScratch]

Thank you 😁

[@ernestmurphy3898]

Ha ha ha, i am sure. It took weeks to build this from paycheck to paycheck to buy the steel and components, and planning the next steps.

[@riterfranachoreyna5865]

Exelente idea amigo Saludos desde PERÚ!!!

[@tatusiowyteatr]

Prosty pomysł, a jaki przydatny!!!

[@faniepretorius5534]

Excellent idea for help in the workshop. Well done.

[@WorkshopFromScratch]

Thank you :)

[@donsmith9081]

Talent!

[@romihofi8848]

Super wykonane.. Pozdrawiam 👍👍

[@WorkshopFromScratch]

Dziękuję 😁 Pozdrawiam

[@pauloamaral8780]

Trabalho muito bom. Parabéns

[@jdwisdom9433]

It's attractive, big enough, and hell for stout! Thanks, JD

[@rafaantczak3050]

Jak zawsze robota wykonana na 100%👨‍🏭

[@WorkshopFromScratch]

Dziękuję 😁

[@rafaantczak3050]

@@WorkshopFromScratch może kiedyś i ja zbuduje taki obrotnik nieraz by sie przydał przy jakiś pracach

[@bakirbadjou1156]

thanks for sharing ideas and techniques. very helpful

[@citysad7233]

عبقرية الفكرة وابداع في التخطيط واتقان في العمل سلمت يداك وتحية لك من syria

[@aslanbalik952]

Precision !!! Good jobs !!!

[@WorkshopFromScratch]

Thank you 😁

[@petermarsh4993]

Wow, this is truly a Man sized rotary table. Put a couple of kids on top and spin them till they were sick! Too much fun. I have one constructive criticism. Instead of square headed cap screws, try black round headed cap screws. They won’t stand out as much but do exactly the same job. Brilliant work overall and so well done. Cheers.

[@norbertcoy1775]

Ein super Teil, sehr gut konstruiert und angefertigt. Werde ich nachbauen!

[@stanthur88]

the microphone stand was a nice touch..........................well done

[@user-kt2hb8xr3p]

Thanks 🤩😍🤩 عمل رائع شكرا لك اخي

[@igory17]

Это лучший вариант позиционера что я видел!

[@STRATTONSGARAGE]

I would really love to build a table similar to this. You did a fantastic job showing the basics on how to accomplish this. Thank you so much for making this video, and by the way could you please give me some idea of what this would cost in materials using US dollars. Thank you so much.

[@richiedwards4953]

fantastic work, well done

[@WorkshopFromScratch]

Thank you 😁

[@user-cc1vc5ks5i]

Мастеру браво и респект. Молодец. 👋👋👋👍👍👍🤝🤝🤝

[@baobel9056]

Très fort. Bon courage d'Algérie.

[@kelleysimonds5945]

That's got to be the best rotary table I've seen.

[@colinabell3672]

Great job. Only thing I can think of to add is some concentric circles scribed into the table for easier setups

[@rekzaprokonveksisablon1278]

the tutorial is very helpful. thank you. I hope you are always creative!!!

[@Rich_0505]

Super Salam from Tajikistan

[@medybenjil7616]

Un grand bravo ! Et merci.

[@MrMultiblades]

Brilliant. A pleasure watching you working.

[@WorkshopFromScratch]

Thank you 😁

[@zalgin_6473]

Wow have a nice job.welding...

[@zalgin_6473]

And design

[@django902]

Muito show, parabéns trabalho incrível

[@user-pm8ym3qi8y]

Я, конечно, восхищен техническими знаниями этого человека, но от результатов проделанной работы ожидал большего..! Смотрел полностью без перемотки и, весьма, разочарован - столько труда, материалов... И что с этой крутилки такая большая польза..? Я сам сварщик, но мне бы и просто хорошего стола хватило.

[@user-uu9dv2gg4y]

Реально бесполезная вещь хоть и красивая. Только в серийном производстве для однотипной работы пригадится и то после доработок, непонятно как идеально по центру заготовку выставлять

[@gregmiller4332]

The speed at which you work is incredible ; )

[@lulutio7767]

Il as seulement de la joie de bonheur de te revoir 👍👍👍👍👍👏👏👏👏

[@WorkshopFromScratch]

Merci :)

[@javierreyesperez6744]

MUY BUENO Y SOBRE TODO QUE PERMITIO EN SU MAYORIA VER COMO LO INICIO DEDE CERO, FELICITACIONES, DESDE COLOMBIA

[@dodlaisdodla]

Time saving... Brilliant idea....

[@MrLucius3247]

Bel lavoro.Molto talento e precisione.

[@reyllangomes2561]

Tem brasileiro vendo esse gênio em ação

[@usuarioextremo4116]

tem curiri

[@Kevin-gx8lc]

Excellent design and build quality. Very well done Sir! Greetings from Southport UK.

[@WorkshopFromScratch]

Thank you 😁

[@silvergrizzly316]

I don't think this guy really plays these videos 2 or 3x faster there speed, I actually believe he is that good. Pure AWESOMENESS!!!

[@DIYFixMan]

Champion!! Well done. I loved your video, you have good hands and you are very talented. I loved what you built, it looks super quality!

[@WorkshopFromScratch]

Thank you 😁

[@MrMidonka]

Extraordinario !!!!

[@jalechavez6042]

Súper...! Qué Buena Herramienta..!! Top...ji ji ji...Saludossss

[@murataflytunov223]

Конечно сделанно классно в заводских условиях.

[@MickMcMadder]

Another great project build. Very nice work indeed.

[@WorkshopFromScratch]

Thank you 😁

[@juanpabloamaral9368]

Beautiful 👏

[@Eversoncorreasilva]

Perfect, Beatifull!

[@WorkshopFromScratch]

Thank you 😁

[@fabry400]

Magnifico lavoro!!!

[@WorkshopFromScratch]

Grazie 😁

[@gausmulla3378]

clean excellent work......just like factory made. brilliant

[@WorkshopFromScratch]

Thank you 😁

[@joaomaglianooliveira1348]

Parabéns show ! Projeto muito bem , 👏👏👏🤝🤝🇧🇷🇨🇮

[@cnc_mill]

incredible well done dump up

[@MNDashcam]

Great job!

[@WorkshopFromScratch]

Thank you 😁

[@PP.EKOTECH]

Super !!!! :) Świetna maszyna ! Jak uruchomię tokarkę , to sobie taką zrobię.. ! ;) Pozdrawiam - Paweł P.

[@WorkshopFromScratch]

Dziękuję 😁 Pozdrawiam

[@syamsurisyam8280]

Sangat mengesan kan ,cara Anda bekerja ,Trima Kasih Atas Info my , Smoga Anda Suxes slalu ,..

[@GabbyTech]

now i want this well done, overkill yes its perfect

[@TheJgetulio]

otimo projeto parabens

[@davedunn4285]

Excellent build mate I would love one of these

[@Atr42Greasemonkey]

Your a mad scientist amazing work as always.

[@danielcalderon4439]

Excelente trabajo

[@santiagomotorssantiago629]

Hola

[@philparrott4424]

Showing your building plans and maybe a picture of the finished project first would encourage people to watch your videos more.

[@MYEVILTWIIN]

1.8M views in 3 months ain’t bad for not having any of the above !

[@ernestmurphy3898]

@@MYEVILTWIIN Indeed sir.

[@MCsCreations]

Pretty fantastic work, dude! 😃 Really amazing!!! For soldering it should be fantastic! 😃 Stay safe there with your family! 🖖😊

[@WorkshopFromScratch]

Thank you 😁

[@jayaken7355]

wow hand made very creative good job 👍👍👍

[@sammyspaniel6054]

Nice clean build.

[@bouitayoucef3093]

مننهاتتاتع

[@teanchainuchchim2460]

I love and love what she has to offer.

[@mftmachining]

Man, that was an excellent job, hats off....TOP

[@WorkshopFromScratch]

Thank you 😁