Homemade Electric Roller Bender

[@WorkshopFromScratch]

The welding machine I used to made this project: www.ssimder.com/discount/WSFS?redirect=%2Fproducts%2Fupgraded-sd4050pro-2024-welder-cutter 3d Print www.geekbuying.com/item/Elegoo-Neptune-4-Max-3D-Printer-523533.html?idev_id=5154&.geekbuying.com&

[@harkbelial]

Best part of the video is no talking, perfection!!!

[@BlueSOF]

This is the best kind of video. It clearly shows every step, but not for too long. The best part is that the sound is even and balanced and there is no annoying music. Well done!

[@WorkshopFromScratch]

Thank you 😁

[@BEDavisBrown]

Your's is the first pipe roller I've seen that thought to include a ruler to make repeat bends, brilliant.

[@iraklisseva2123]

Μπράβο σου φίλε πολύ ωραία δουλειά και χρήσιμο εργαλείο σού εύχομαι υγεία και ότι καλύτερο ευχαριστώ για το βιντεάκι 😊😊😊😊

[@tedbastwock3810]

4:52 wow, you got me there, I have never seen that tool, based on how you are using it i guess that is some sort of metal router tool? Fantastic video always love watching all your builds, you are a true pro!!

[@WorkshopFromScratch]

Thank you 😁 I saw this tool on some video shorts and immediately started searching the Internet 😂 this is the link on Amazon amzn.to/3UpkJ2K

[@tedbastwock3810]

@@WorkshopFromScratch Thank you!!

[@mead6754]

Top class work by a top class tradesman

[@WorkshopFromScratch]

Thank you 😁

[@francesco_maggio]

Che progetto utilissimo. Ancora una volta l'uscita del tuo video è un ansia di adrenalina🤩

[@WorkshopFromScratch]

Grazie 😁

[@RustyInventions-wz6ir]

Very nice work sir. This machine looks very handy

[@CraigHollabaugh]

Thing of beauty! Thanks for putting this video together.

[@WorkshopFromScratch]

Thank you 😁

[@markllev356]

Nice job! A lot of time to change dies though.

[@jimsvideos7201]

Very nice. It has everything it needs and nothing it doesn't.

[@WorkshopFromScratch]

Thank you 😁

[@vinceianni4026]

Good job mister beautifully done

[@WorkshopFromScratch]

Thank you 😁

[@kameljoe21]

I like it. The only thing I would change is the round stock which holds the other dies. Cut them off and thread them and mill out a flat spot to install them. Using your lathe you can make a design on the ends and round them over. Knurl them if you want. To make it fancy. For an additional project you could make a mag drill stand for a hand drill that can put things in at an angle. Degrees less than 45 degrees or less. While the list of times one might use it is short its still a one off tool for that one projects you need. Now you have video idea and as far as I know it would be a one of a kind tool.

[@user-ale7723]

سبحان الله الذي علم الانسان مالا يعلم لكي يصنع الابداع

[@zacharywong483]

Fantastic work here!

[@WorkshopFromScratch]

Thank you 😁

[@samuelmendeskardel1986]

Muita criatividade e conhecimento

[@romihofi8848]

Fajna gietareczka.... Pozdrawiam 👍👍.

[@09FLTRMM77]

MM77 Approved 👍🏼👍🏼

[@tjs_welding_and_fabrication]

I have a friend who worked at Moore special tool. Cool project.

[@WorkshopFromScratch]

This stationary drill is my best purchase for the workshop I have ever made :) Thank you😁

[@DanKoning777]

Great job; your designs/builds have come a long way-you make it look really easy, but that's true of anyone whose good at what they do. I'd like your videos even more if they were more detailed/longer re: what it took to build this, but that's jmo. Looking forward to seeing this being used in future videos. God bless.

[@WorkshopFromScratch]

Thank you 😁 I'm sorry if I showed something inaccurately, I will try to make a more detailed next video :) Regads 😀

[@DanKoning777]

@@WorkshopFromScratch // Nothing is inaccurate-not at all. I was only saying that more detail would make for longer videos, and that would be great!

[@WildmanTech]

Excellent work!

[@WorkshopFromScratch]

Thank you 😁

[@robertoferreira_bethopesca127]

Ficou topdlinha 👏👏👏👍🇧🇷😎

[@MCsCreations]

Man, amazing work! 😃 Now you can start to build bike choppers. 😬 Stay safe there with your family! 🖖😊

[@WorkshopFromScratch]

Thank you 😁 You guessed it, I'm going to make a chopper, but during the holidays 😁

[@MCsCreations]

@@WorkshopFromScratch sweet! Post at least a picture of it afterwards! 😃

[@WorkshopFromScratch]

Ok:) Now I'm building a pretty crazy vehicle, but this is the second time I'm working on this project and I'm failing again🤣

[@MCsCreations]

@@WorkshopFromScratch Keep going, you're going to get there! 😊

[@andrea.S..]

Ottimo lavoro💪

[@WorkshopFromScratch]

Grazie 😁

[@tylertatman925]

I’ve got a question. I have a 14 hp Kohler engine running a 30 series torque converter. This should be well over what this torque converter can handle, but it seems like it is incredibly underpowered. It’s not able to open it up all the way, and it barely even pushes me on the motorcycle I’m making. It also bogs down every time it reaches full throttle.

[@crazyericstewartofcanton9999]

What's The Question? Not Being Funny Or Anything, But Just Thought I'd Ask.

[@tylertatman925]

What’s wrong with the engine. It should be incredibly powerful but it seems to be barely powerful to pull itself. It also doesn’t like to idle or hold top speed.

[@KSMechanicalEngineering]

Nice work

[@WorkshopFromScratch]

Thank you 😁

[@Nilezy]

awesome work! Can you show how the micrometer is used to measure the bending radius or deflection

[@WorkshopFromScratch]

Thank you :) I added information that the caliper will be used to measure the repeatability of bending several elements, but the dimensions can also be calculated by substituting the formula, but I still have to ask my brother because he is better at mathematics than me😁

[@CIFYou]

Impressive indeed, first comment.

[@brucemitchell5637]

Nope, I'm first!

[@CIFYou]

@@brucemitchell5637 ok , you first :)

[@Handirifle]

Nothing like a $50,000 shop setup to make a diy tool.

[@TaeKenDo]

Clawing back slowly on the investment...lol

[@Treesusb]

I remember when I would make these comments. Over a ten year period I built my own 50k shop. Tools add up quick.

[@Douglas1ro]

Yeah, this guys idea of "home made" is very very different than mine.

[@-eliasmakris7705]

I wonder if you want to install coils for the boiler, how will you do it after you have put the coils inside!

[@simonburri8178]

Super gut 👍💪🔩🔧

[@huntley513]

Did I miss where you got the motor and gearbox

[@afshinzand220]

This video deserves millions of views not 84k

[@harrobwil1]

Excellent!

[@cravascia]

Hi, is possible have a project? What dimension of bearings are you used? Thanks

[@figsolutions8747]

Hi did you sell this unit?

[@qorinadityapratama7914]

Sir can u make video making vibration polish machine?

[@otichysp]

Hi, I would like to ask why you don't use the band saw that you made. I would like to make one too and seeing that you are using a different one, I am a bit skeptical.

[@Dustmadeout]

Should have put a motor on the leading screw, so you don't have to put the controller down every 5 seconds.

[@BJFerg103]

Let’s see you make it.

[@Dustmadeout]

@@BJFerg103 Already did with your mum.

[@alfa456ak]

Old​@@Dustmadeout

[@pukinpaja1974]

Nice!!! 👍🏻🎅🏻🇫🇮🇫🇮🇫🇮

[@WorkshopFromScratch]

Thank you 😁

[@AmbadiBM]

Motor speed and direction controller is Inverter or VFD

[@erikbraguim4288]

Show parabéns

[@EdwardRoss-tb5hz]

Nice!

[@WorkshopFromScratch]

Thanks 😁

[@mickrobe]

Could replace handheld remote by foot pedals...

[@WorkshopFromScratch]

I have to buy it, it would definitely be much more convenient, but I wouldn't give up this remote control, I'll just add a foot switch :)

[@rfactor117]

Where did you order the motor with gearbox from ?

[@YagrumBagarn]

Beauteful

[@WorkshopFromScratch]

Thank you 😁

[@karlismelbardis3742]

Wery nice project!👌 Where you ordered rollers from?

[@WorkshopFromScratch]

Thank you 😁 You can buy such rollers on Amazon or another online store, the rollers are called gate rollers

[@JKT_bonsai]

tanks y gaesss❤❤❤❤❤❤

[@moritzkirschner7628]

Top!!! Where have you bought the u-groove roller?

[@WorkshopFromScratch]

Thank you 😁 You can buy it in the agricultural machinery parts store and although I still have to check it on Amazon

[@gabrielgomescunha]

At min 15:16 I got myself a second degree burn 😂

[@WorkshopFromScratch]

No, it cooled down. But several times I unknowingly grabbed a freshly welded piece of metal - I don't recommend it, it was an unpleasant experience 😂

[@gabrielgomescunha]

@@WorkshopFromScratch I'm very familiar with that type of burn

[@活生-j3s]

加压装置也是电动就更好了🎉

[@ronaldchurch6356]

nice

[@WorkshopFromScratch]

Thanks 😁

[@yasarozbey8653]

👍👍👍

[@OshiharYadav-rv4bl]

3:56 3:58

[@milanthemilan5015]

Welder looks like IWeld mashine.

[@apollorobb]

That would be a roll former not a bender.

[@WorkshopFromScratch]

I've already corrected the title, sorry for the confusion

[@thierrygonzalez7334]

😱👌👍👏💪

[@dimametis5239]

👍👍👍🤔

[@PeterNetped]

[@chuckclark9464]

👍👍👍👍👍🤜🤛

[@StillOnSteel]

👍🏻👍🏻👍🏻🫡