World Record Set! Quickest and Fastest Gen 2 Stock Motor and Transmission Mustang Twin Turbo 6r80

[@freedom6919741]

It’s bad ass no matter what the keyboard warriors say. Coming from a GEN2 owner this makes me glad I bought a GEN2.

[@katkilr7685]

Well I am not a keyboard warrior. And I am telling you there is no way on God's green earth that the car has a stock. motor. 3550lbs - 1432.10hp = 7.9 1/4 mile. NO WAY in hell. Yes a sleeved stock Block will but not a stock motor. I am pushing 973whp out of my '17 Mustang GT. And that is pushing the bottom end and I got MMR oil/crank gears.

[@5.0daddy]

Congratulations, very very nice accomplishment. It’s shocking how much punishment these 5.0’s can take. Well done. 👍

[@victorxavier9977]

That's badass 😎 congrats on putting in the hard work and surrounding yourself with the right people and having a great outcome 👍

[@mutleyadamsracing2684]

Powertrain being the same is all that matters as far as being a stock race car. Good job mate!

[@toys4meh2crbn]

Man that color blue is gorgeous under the lights! Especially running 7s! 😁😁

[@rickierivera2939]

Congratulations!

[@bryansmith8533]

Congratulations man. I have 2016 GT myself. I'm glad you're out there representing us good 💪Shit I wish I could get mining this 9's to take care of some of these Corvettes and Demons out here trying to flex on me. 😅

[@danielshepard7357]

That hard work sure does look good when you get it right. Well done sir!!

[@gregbogner9610]

Congrats to you. Amazing accomplishment. Great content and video. Thanks for sharing this. Honestly one of the best representations of these great cars!! Nice Job!!

[@jimmymccormick142]

Congratulations bro fantastic job I'm surely impressed with the stock motor and a 6 or 80 keep digging keep pulling the knot out of them bow ties

[@larryhensch2280]

Hell yes bother. Thank you

[@antoniomccants8216]

I asked in comments what kinda boost u ran I have a 2015 with twins 67

[@markbogle8062]

Congrats on what you did

[@Crodgers1407]

Thank you

[@harryroyall7948]

Great job with that mustang 🐎

[@troylambert5140]

Absolutely awesome car man

[@stangbangincoyote701]

Badass Lund Racing killed it

[@Coyote-w3s]

Awesome car Brother!

[@avimedina6562]

Congratulations

[@stevengrissom7142]

Congrats to you sir!

[@mooklocklear1182]

Great work man you getting after it

[@Zach4lakers3221]

Huge congrats man!

[@mikealbert728]

Nice. If you are at 3550lbs I figure someone could put a 2400lb foxbody in the 6s with a stock Coyote.

[@rodgerhutchinson1690]

Congratulations! That’s awesome! Why the gray doors?

[@Crodgers1407]

They are carbon fiber

[@robertjohn2249]

Does the engine have upgraded oil pump gears and crank sprocket? That's unbelievable 7.9 with a sbe

[@Crodgers1407]

Yes it has both. Check out the other videos on my page and one video is a very in depth walk around video of every part it had at this time

[@hoyoman1]

sbe 7 seconds insanity

[@justinmuse7335]

Very impressive I do have a couple of questions. What tire are you using and what size. How do those carbon doors do for regular driving (movement/noise) and are they stable at 178 mph And lastly about what horsepower do you think you're running?

[@Crodgers1407]

Mickey Thompson street r radial 17” , carbon doors are fine regular driving. Not noisey once you fill them and out a door panel on , they seem stable so far And I’d say on the high boost setting the car makes probably 1200 or so

[@Zman0]

if you upgraded rods and pistons, it's no longer stock block. Stock block means nothing done to it. I'm saying this so that someone doesn't blow up their engine thinking they can get away with it. You have somewhat of upgraded internals because there's no way a stock block can hold that much power. And well start saving for a new engine if it's really still stock with no internal upgrades. With that said great accomplishment, this is very impressive. Are you rebuilding your 6r80 every season?

[@Crodgers1407]

I do not have upgraded pistons or rods. Like I stated the engine is unopened and the block and internals are untouched. So yes. It did hold that much power. Thanks for the advice I have not rebuilt the 6r80 yet after the season. Still seems fine

[@Cobyontherun]

Congrats man! This may be a stupid question, but why is the 1/8 mile time not getting any faster as the 1/4 mile drops?

[@Crodgers1407]

The 1/8th has been dropping steadily since I have started. I am down in the 5.1 range and the mph is 137 now The almost 40mph back half helps drop the 1/4 et as well. But most of your 1/4 times are made in the first 660’. For example I just went 5.1 at 137 and let off and still went 8.8 at 100mph The 60’ 330’ and 1/8th really makes up the 1/4 mile time with the help of how much mph (boost) from the 1/8 to 1/4

[@koron274]

Any new videos coming?

[@Crodgers1407]

@@koron274 actually planned to go LIVE here shortly with an update. May make an actual video if time allows before World Cup. But a live I can do quickly tonight It will save to the Channel if anyone misses it

[@koron274]

@@Crodgers1407 great see you then. I'll be waiting

[@antoniomccants8216]

If u don't me asking what kinda boost were u running on them passes I have the same car with stock engine that runs great

[@Crodgers1407]

20psi

[@katkilr7685]

@@Crodgers1407 LOLOLOLOLOLOLOLOLOL NOW I KNOW YOUR FULL OF 💩

[@jasonbrown9675]

Congrats again man that’s a bad bitch.. Meanwhile I’m out here trying to go 8s with my Whipple and stock Gen 2 😂.

[@CoyoteDAworld]

Congratulations 🎉 but not everyone can afford to make a coyote built like that so I guess it’s easy when u got money and knowledge

[@Crodgers1407]

I do not have that much money. I am normal working guy that puts in 40-50 hours a week for a career and a trade and I just have a hobby with cars. I surprisingly don’t have that much money into this build compared to other cars

[@bloodmotorsports]

i see it has a transbrake what make ? and size stall and that’s a nice a kar

[@Crodgers1407]

The 6r80 have the ability to have a factory transbrake with some wiring changes and the stall is about 4k

[@bloodmotorsports]

@@Crodgers1407 niccccce

[@scoopgotti]

Nice. Congratulations on your accomplishments 🦾

[@YSGNiko]

Why stall did you go lent on the converter

[@Crodgers1407]

Huh? I don’t understand the question

[@jesusm2159]

Are u going to Georgia racing 🏁 event November 2022?

[@Crodgers1407]

The mod nats event?

[@ogreracing]

Awesome work and killer time but how is it a stock transmission when it's built...

[@Crodgers1407]

It is the transmission that came in the car. The term “stock” is very opinion based. Your definition of it is different then others. The coyote platform has many transmissions in use such as th400 power glides. 3r200 4r200 10r80 etc. so this , to me , is the stock transmission for this car. Hope that helps

[@ogreracing]

@@Crodgers1407 but then those that have rod and pistons in the motor would be considered stock ..built is built .. not taking anything away from the accomplishment cause running 7s with any level of 6r80 is impressive... but its not stock and I've never heard anyone call a built 6r80 a stock trans

[@Crodgers1407]

@@ogreracing then that would be a stock block engine but not a stock bottom end. Could a piston and rod engine still claim stock block? Yes. But they just can’t claim a completely stock bottom end. It’s all in the wording and opinion based that example just proves that even more. At the end of the day my transmission has replacement clutches to make it durable. It’s a 6 speed 6r80 just as it came in the car from the factory with some parts to make it last. And thank you for the compliment. No hard feelings at your question 🤘🏻

[@ogreracing]

@@Crodgers1407 none at all and like I said not taking away from the accomplishment cause it's bad ass to run the number regardless of what trans or level of built ..

[@stevengrissom7142]

Let's see you do it then...

[@list3723]

Mr CRogers, roughly how much would this build cost?

[@Crodgers1407]

40-50k. Not including labor

[@list3723]

@@Crodgers1407 Including the car? Sorry! Last question.

[@Crodgers1407]

@@list3723 no. That’s just parts. Turbo kit, transmission build, suspension, wheels tires, fuel system, boost controller. Etc. 40-50k plus the car itself anywhere from 20-40k

[@list3723]

@Crodgers1407 You are awesome, man!! Thank you!!

[@jonpayton9579]

Just out of curiosity what rpm are you turning this motor to?

[@Crodgers1407]

75-7600

[@jonpayton9579]

@@Crodgers1407 nice. I’m impressed with what you have and not to mention the relatively short amount of time that you accomplished it. Keep us updated with the progress, I’m really curious to see how it continues from here.

[@GoodMojo_Garage]

How do you run a 7 second car without a cage?

[@Crodgers1407]

It has a cage now

[@jesusm2159]

Any steeda upgrades?

[@Crodgers1407]

Nope not much on the car from steeda

[@NickelWhiteS550]

What fuel?

[@Crodgers1407]

One ethanol R

[@ezekielmoore1318]

WHO BUILT YOUR TRANSMISSION

[@Crodgers1407]

Brett lasala

[@ezekielmoore1318]

Does it still have all 6 gears reason asking is I planning on running one behind my 351w build and quick6 only works with factory stile 6r80 transmission.

[@ezekielmoore1318]

What's your builder's info I live in Alabama and will have to ship to them. Onless they have a build kit and I can take it to a local shop thanks in advance.

[@jamesgeorge4874]

"Stock" twin turbo 5.0 huh ? Not bad, but my buddies "Stock" new edge has a twin turbo setup, with a "stock" powerglide that rips 6.80 consistantly. 6 speeds is about 4 too many.

[@Crodgers1407]

The power glide comes in new edge cars from the factory? Wow I didn’t know that. Learn something new everyday. So power glides come from the factory in 1999-2004 mustangs?

[@jesusm2159]

Daily driver?

[@Crodgers1407]

Not a daily driver. I have a work truck I drive daily. But I drive it every weekend almost

[@jesusm2159]

@@Crodgers1407 got it 👍 would be nice daily

[@katkilr7685]

NO WAY IN HELL... you are telling us that you are getting 1,432 HP out of a stock motor..? I CALL BULLSHIT...

[@Crodgers1407]

You should race it and see

[@katkilr7685]

@@Crodgers1407 am not say you didn't run a 7.9 1/4 mile. That S.O.B. is fast... But I bet if I broke that motor open it wouldn't be all OEM parts. But I am building a motor and when it's done I will be more than willing to race you.

[@tnasty9017]

God damn mustang