WORLD'S BEST CHAINSAW REVIEW! Way more than you ever wanted to see on the fuel injected Stihl 500i

[@BuckinBillyRaySmith]

what do you do if you ve only got one nut ,, stick to the rodeo i guess ... spread love and kindness and lift yer fellow man up .

[@guiltyoftreesoneastsidetre4792]

Amen Buckin’ ! :)

[@Andreyanswer]

Yea !

[@jmacca27]

This made my night 😂

[@naturundhund]

😎

[@icedestoryer7550]

@@guiltyoftreesoneastsidetre4792 its not locked top motor

[@jacobschneider5504]

Tip for no mess bar oil refill: Save some dish soap bottles, use a funnel to fill them with bar oil at your shop. Makes for a fast / easy / no mess fill on the jobsite. Thanks for the review!! 👍

[@armyguy19811981]

your years in the woods i used a syrup bottle lol

[@traviss1200]

Any squirt type bottle. We use dawn dish soap bottles. Works great

[@KriegerDelfin24]

Just use the Stihl refil Neck. Automatic Stop when you pull of. www.stihl.de/content/dam/stihl/mam/modell-landscape/4a2a6566484a4171aedb3d3cdf0e09a3.jpg.transform/StihlImageGallery-mq1/img.jpg

[@michaeljgraff]

I prefer plastic 1.75l whiskey bottles.

[@tristancarver8777]

I just pop a small hole in the foil of the bar oil bottle and it works just like a squirt bottle. :) learned my old man that one, he thought it was clever.

[@fge4007]

You know people aren't watching the whole video when no one comments about the "Safety Tips" - 7:33 and 38:54. Best safety class out there.

[@bradarmstrong3952]

We all enjoyed the safety starting tips, we just don't want YT to take away our fun ...

[@xray12345678]

I’m weak after the starting tips

[@dooletube]

Nice to see a review where the saw is being used for actual work. Instead of just cookie cutting

[@neljetski1073]

@Eric King yeah

[@theenviropro7052]

BUCKING BILLy RAY DISS?? OOOHHHHHHHHHHHJJ

[@dooletube]

@@theenviropro7052 Never!! i love Bucking

[@theenviropro7052]

@@dooletube I had to ask haha I liked his review aswell but this was more of all around review

[@I_am_ARTBOT]

These guys know their stuff! Great watching you take out the cottonwood behind our house (the first one in the video)! Outstanding work by all!

[@curtisneill2007]

😂😂😂😂 No... no they don't actually. Ask me why I know that.

[@MarkSilver]

The 500i is dope for big changes in operating elevation. I routinely move from 4200' to 8500' and back again day to day. With my other saws it seems like I am always dinking around with carbs. Not much to do on the 500i. It might take a few seconds to figure the mix out once it starts, but it always gets it right (if not a bit rich). The 500i just seems to always idle better with no screwing around. You start it, and it runs until you push the stop button. I feel like if you are working a bunch of elevations, it may be worth a few hundred bucks to not have to mess around: at all. I believe that my 500 always takes 3 pulls to start at the beginning of the day. I assume it is charging the run capacitor that supplies the electronics with power. So it seems like 3 in the morning, then first pull the rest of the day.

[@stevesproul3744]

Awesome review. Most reviews on KZbin people use the product for 10 minutes and review it you used this saw for weeks and really put it to the test. Great job

[@2020jd]

I died when you were explaining the proper startup procedure 😂😂😂😂

[@rorschacht8478]

Same, that was gold 😂

[@تقلباتالحياة-ظ4ف]

@@rorschacht8478 kzbin.info/www/bejne/naK0YZaGZ5KLjMU

[@6lidewell]

One word: Dominance. I think this is the first time I have ever laughed out loud at a learning video. :):):)

[@samlashley7520]

I work for USFS fire and we just got a 500i this season. The M-Tronic system is pretty amazing. The saw would run a little rich or lean at first but eventually it would "tach" itself out and the low high would be pretty spot on. I have noticed it will go through gas faster than the 461 and 462. Great saw for work in varying elevations. We run it with a hallow 28" bar and it is a joy to run all day. Great video!

[@dieternuetzel3834]

There is no M-Tronic on the MS 500i or TS 480i/500i (they invented the technology). It is real injection. Had one of the 200 pre-production model 5 years ago and run my own for 3 years, now. Greetings from Germany.

[@alanshaw6161]

This is the way reviews should be done for chainsaw’s! Working it over a good long period of time! I hate reviews where the saw is run for 10 minutes on a few small trees or cutting biscuits and then declaring the saw the greatest thing that ever hit the wood. Excellent job! Real work with experienced operators and getting some experience with the product with many configurations.

[@robinmoens1840]

Around minute 20:45: The saw acted weird not because it was cold, but because the MS500i adjusts itself during the first revolutions and determines its idle speed. Because you accelerated from the start, the saw could not determine its idle speed. thanks for the interesting video

[@sethhaun4440]

Why would that make it junk' ?

[@nichosoulsea1]

Love this saw, had it for two years. Using it for milling and dropped a hundred oaks earlier this week. I run RD3 chain on it for milling as I’m dealing with super hard seasoned live oak logs. Had that chain sharpened after a week of milling and then dropped the rakers for logging. Running 25”,28” and 32” bars. Have noticed that if the weather gets hot and the saw is sitting for a while the pressure in gas tank need to be relieved to make starting easier. God I love carbide chain. Thanks for review glad you’re liking the saw.

[@joerainwater7360]

20 years in and I have my moments but still “pre oiling the bar” frequently 😂

[@dec81964]

I work at the factory that builds Stihl® You've done a great review dude! nice to see that my work builds a great machine!

[@ollylewin]

Made in Germany is the only thing you need to see on any tool. Every tool I own is German because they are the best by a long way.

[@TheDennys21]

@@ollylewin Stihl is owned by Makita which is Japanese, Japanese stuff is the best in the world, even better than German.

[@TheDennys21]

@Loner Wolf then why are all the lumberjacks praising the 500i so much?

[@janbilch9307]

@Pre Malone Wrong. Stihl is still family buisiness. Dolmar is owned by Makita.

[@mikecolligan2829]

@@TheDennys21 well that sucks. makita killed off all dolmar german gas saws early this year, just battery saws now. are stihls gas saws next?

[@110americalovingpatriot2]

I'm at 37 years and I poured bar oil all over my trucks tailgate last Saturday. It's just something that we never figure out😜 I did ride the short bus to school, hehe

[@VesaGuardian]

This channel is not just about felling trees, nor is it about gear and stuff. This is entertainment for guys like me. Subscribed in a heartbeat!

[@DavidTheDave]

Been running mine for 3 weeks now. I can confirm it's an excellent saw. The dealers can't get them in quick enough here in Australia.

[@AnthonyCutelli]

I used a 500 i for 7 hours stopped for morning tea and lunch and refuel sharpen chain clean filter and then on the 7th hour could not start again. Running full Stihl synthetic oil 50.1 fuel was 91 unleaded octane fuel .Cutting fire wood all day switched to the 660 to finish the day .The 500 okay but next time. I will buy another 661 .Mid range saw 562 husky thumbs up value for money more power better saw, I think for the money. I was told bubble pump 10 x times on the 500. Changed the plug in the saw fixed the problem in the 500. Cheers Great You TUBE vids big respect .Awesome crane work we all use chains not slings in Australia on the hook but enjoy your style

[@callmehank88]

52 year old man giggling like an idiot at the safe starting recap at the end and my wife's just given me the "oh grow up" look.... Again... Haha 😂🤣😂🤣 Never!

[@jayfrost1178]

Meanwhile my wife is listening from her chair and laughing her ass off.

[@ericbowler804]

I have this saw I've been cutting trees for 21 years and its hands down the best saw I've ever owned. It has so much power I highly recommend it I'm gonna buy two more when I get the money

[@ericbowler804]

@@neejneej9308 any size bar u want that saw is an animal I love mine

[@dieternuetzel3834]

We're waiting for the MS 300i. No it is NOT announced anywhere. And I do not mean the MSA 300 (Akku). If it ever come arround. Weight like 241, ~4 PS. Replace 241 and 261 as pruning saw. Greetings from Germany.

[@aishainman]

I was running this saw for about 2 hours at about a 30-50% duty cycle kzbin.infoUgkxfQm1wmg0ItKDLavxj1nXtQY9HP7EF504 and it did a great job. I used the lever for the built in sharpener to clear chip buildup out more than to actually sharpen the chain. It managed to cut some hardwood stumps much larger than it's size without bothering the neighbors with hours of 2 stroke noise.

[@niccomaker]

Damn dude, Y'all are some funny ass folks. It's always great working with a crew like that.

[@artytravis3871]

The “how to properly start a chain saw” got me. I died 😂 love the videos!

[@bjornoverkamp6824]

I work now for 1,5 years with this saw. Best saw that i have ever used👍 Greetings from The Netherlands

[@notmarkpassaretti]

You have to show your dominance over the saw 🤣🤣🤣

[@roobuggy1]

Hi I’m in Western Australia I had my name down for nelly two years for one of these MS500i I got a call 3 days ago from my local dealer to say HEY guess what your saw has finally arrived 😮. I am a farm fencing contractor and most of my fencing materials are Australian hardwood. Iv been using a MS311 for probably 10 years this beast is a little heavier but WOW O MY. GOD the throttle response is insane and when you touch the timber it says let’s go. I haven’t stopped smiling for 3 days 😊😊😊

[@jensendixon9500]

The clip on the side that you think is to protect the screw is actually there for you to keep your combination chainsaw tool with the saw at all times

[@SunriseSuperThruster]

I bought my 500i about 6 months ago here in England. It cost me about £1,050. I'm a do it yourself lumberjack in my late 60's. When I watch the tree felling video fails I think lady luck was on my side. That being said it is never too late to learn and I took down a 60' pine in my garden and chopped it up into little sections in no time at all with my 500i. Still got a few more trees to fell but I am in no hurry there is little I cannot do now. Great video.

[@OurSustainableJourney]

Upper Left USA is the most American location description ever 🤣. Keep up the awesome work. Love the review.

[@mrd04001]

Great video, love the channel. Please do a video of the mod process that would be awesome to see. PS. Watching your channel made me upgrade (completely unnecessarily for my purposes btw) to a 362 with a 25” bar, but it’s awesome!

[@evanjohannsen88]

Great review! Thank you very much for the in-depth information! Also, I would definitely like to see another video after you have souped up the 500i!

[@JohnJohnson-hk7cj]

Re your first review, excellent! You put the saw to work (real work😀) and in your final analysis, gave good explanations as to how the three work and provided the perfect information to enable a potential buyer to know which one suits best. That you didn’t just say the “I” beats the rest is testament to your honesty. Don’t let em buy you out over time😉😉

[@timhart2652]

Cuz a lot of people's been complaining about the oil hole is smaller than the normal 9/32 so we've been drilling them out and now they work beautiful no more heating up you know.. so now Stihl starting to make the 9/32 hole in the newer bars again soon

[@denisthemenace.]

9/32"? Over a quarter of an inch oil hole? Maybe 9/64

[@تقلباتالحياة-ظ4ف]

@@denisthemenace. kzbin.info/www/bejne/naK0YZaGZ5KLjMU

[@KevinsDisobedience]

The tree next to the deck that he back cut first and wedged over was a work of art. That thing was leaning hard back to the house. I mean hard! I’d never have done that without a line up in the tree, but damn if he didn’t pick it up and move it. Nice job!

[@elmercanales7542]

As soon as he said that no matter how you break it in, it doesn’t really make a difference i gave this vid a like lol. Ive had the same experience, if the saw is gonna be good, its gonna be good no matter what you do.

[@jmvmike]

I’m glad y’all ran the hell out of that chainsaw in a variety of situations over several weeks. I appreciate you demonstrating the proper chainsaw dominate humping technique. I haven’t seen Bucking With Billy Ray demo that. Thank you for the great work!

[@finlaygraham-rudd7828]

Stihl have used EFI in their concrete saws for a while now, so it’s a pretty tried and true technology.

[@JillKarydis]

Try tilting the saw towards you when topping up the oil.You will see it filling easier and have no overfills with more control.Love your stuff

[@harm7448]

I believe the little clip thing on the wrap handle is for holding your chainsaw tool

[@FishFind3000]

That is exactly what it’s for.

[@madhatte73]

my lizard brain also went "scrench holder, thanks engineers"

[@harm7448]

@@madhatte73 lol yeah i also thought about that

[@andrewsmith6406]

I looked through the comments just for this

[@تقلباتالحياة-ظ4ف]

@@FishFind3000 kzbin.info/www/bejne/naK0YZaGZ5KLjMU

[@Eap7899]

15:00 - 17:24 as a WA tree guy, I understand backing up the tag line with wedges. But it seems like you’re wearing yourself out pounding those wedges more than necessary. Trust your winch and always use a stronger rope that necessary (I try to use 3/4 bull rope on hard pulls). Just a thought on one portion, good video

[@asimplierlife3104]

Funniest video yet :D Will share this with all the haters from when I mock the crotch start method :)

[@skoshunt]

It was a fun video, but yet informative, nice job, garage is looking good

[@تقلباتالحياة-ظ4ف]

@@skoshunt kzbin.info/www/bejne/naK0YZaGZ5KLjMU

[@alanpranke3299]

Got my 500i almost 2 months ago after begging/writing letters for 2 yrs. The throttle response is awesome - almost seems like it anticipates tough spots.

[@Nongdanyeudau]

I want to be your friends

[@powerlinekidforsman9360]

the saw is a spring mount so that is why it is so jiggly

[@hbhb8173]

100%

[@تقلباتالحياة-ظ4ف]

@@hbhb8173 kzbin.info/www/bejne/naK0YZaGZ5KLjMU

[@OWENPGIAN]

Sthil technology has advanced so much that it has made a full circle back to the primer button - lol.. anyways awesome review!

[@timhart2652]

Yeah we just tore one completely apart on the bench those kind of easy simple looking at the ports and the timing and everything on it we're going to have a little bit of fun but the way the front ports are rotating off the flywheel it creates like a little up pressure through the transfers for tanks and it doesn't have that bad of a wash across the Piston but it's not washing it all the way off but it looks good looks like fun soon Port work

[@briankennedy1313]

The switches always seems to go bad to the point you have to choke it to shut it off so it’s a good thing. 660s were notorious for that.

[@guadalupevalenzuela7550]

You have a point

[@FishFind3000]

@@briankennedy1313 that must just be the grounding contract getting dirty or damaged.

[@madhatte73]

It's not quite a primer button -- rather than pumping fuel into the carb, it mainly pumps air out of the fuel system. The computer can't calculate for air very well so if you get rid of it it starts predictably. I know that it amounts to the same but the engineering logic is completely different.

[@S_man89]

Dude I love the assert your dominance over the saw line. 😂😂😂

[@nationsenemy]

Let’s see those saw mods, baby! I’m interested to learn more about that.

[@anthonyrogers9798]

So glad I’ve found this channel. Such easy watching and great information. I’m from the uk and you’ve got me wanting to move over there to become an arborist.

[@enius6]

Would love to see what's it's like after being modified!! Love my 500i!

[@moorshound3243]

I'd rather buy another motorcycle for that money.

[@firedtradesman]

I just poke a little hole about 1/4" diameter or less in the foil seal on the bar oil jug on the side I pour out of, which is at about 3 o clock if the jug handle is facing you. Squeeze to fill the saw and when you stop squeezing it stops pouring. If you rip the foil off it's gonna be a mess. Thanks as always for your high quality content. :)

[@alexmattyspac7605]

I do that too.👍

[@تقلباتالحياة-ظ4ف]

@@alexmattyspac7605 kzbin.info/www/bejne/naK0YZaGZ5KLjMU

[@kurts7216]

A great trick for not spilling bar oil is DONT open the seal. Poke a #2 Phillips screw driver through the seal on the lower edge. You’ll have total control of filling your saw just by squeezing the jug. 👍🏻

[@shermankearns200]

I just had the remnants of the east coast hurricane down a big red oak and block off a road I had to call it in to 911 and didn't get to have any of the volunteers fun clearing the road. I always carry 2 saws with me in my truck an t019 limbing saw and a MS250

[@Dogo24h]

Good job and very useful. The saw is so great, watching it I think of some horror movies.

[@jjjoooojjj]

Best review guys for sure..!! I've got one yesterday and after couple of whiskey's I've realised that 500i has face of the Transformer..!! Also I paid about US $1670 for it here in Australia.

[@teddarwin24]

How would you mod a saw? That would be amazing to see.

[@johncast9565]

Bigger injectors maybe 🤔

[@rogerweaver7686]

@@johncast9565 and head work

[@تقلباتالحياة-ظ4ف]

@@johncast9565 kzbin.info/www/bejne/naK0YZaGZ5KLjMU

[@تقلباتالحياة-ظ4ف]

@@rogerweaver7686 kzbin.info/www/bejne/naK0YZaGZ5KLjMU

[@warrenwise8127]

Wow, they are light, my 50 or so year old 051-AV is around 25 ibs with the 30' bar on her, fun drop starting her, no chain break

[@robip1006]

“Just subscribe” imagine watching hours of content and not just hitting a button to support it lol.

[@Steve_K_MS660]

To fill bar oil without spilling. Poke a small hole in the foil plug under cap on bar oil jug. Step two squeeze jug while aiming into bar oil tank. Step three stop squeezing when tank is full. 👍

[@thim8009]

When your cutting everything in sight it reminded me of when Peter Griffin got his first chainsaw

[@timhart2652]

😜💩

[@تقلباتالحياة-ظ4ف]

@@timhart2652 kzbin.info/www/bejne/naK0YZaGZ5KLjMU

[@Temmink6]

I noticed Jacob limping with his arm a bit, must be a chainsaw elbow!

[@تقلباتالحياة-ظ4ف]

@@Temmink6 kzbin.info/www/bejne/naK0YZaGZ5KLjMU

[@HienBuiMobile]

You are = you’re

[@troycoates5822]

Nicely done, without a doubt the best review I've seen yet on the 500i !

[@drewscreations8551]

Killed me with that starting procedure! 😂😂😂

[@robperkins2674]

Good stuff you sir get much respect as a climber in the 80’s and nice saw

[@harryharry3193]

im subbed. been subbed. i like to see a mod. never realized these were so light.....my cs590 echo is 17lbs........geee. I love that saw. not really a stihl guy, but i like watching on occassion

[@picturemetrollin2093]

I had a Pulan 2050 20" bar for 3 years now, and it cost $240. I have been impressed with it. Of course, I don't use it for a living. But if you need a saw for cutting firewood or felling a tree a couple times a year, you can't go wrong with it.

[@rabidpigseatmore]

I’m glad you didn’t cut out the children interrupting you! That’s life, reality!!

[@1oddtech]

New subscriber and recent purchaser of a MS500i. I plan on mainly using it with the 28" bar but I am going to mill some boards with it using a 36" bar. After watching your video I'm going to return the regular chain I got for the bar and get either semi skip or full skip chains. I don't plan on doing allot of milling with it.

[@jacobhemmen8357]

Do a before and after when you mod the 500i

[@wildebtw]

Love your videos. Don't worry about being late, your videos are worth the wait. Starting my own felling/milling project next week and your videos have been a huge asset thus far. I would love to hear your opinion on some of the other brands ie: Echo

[@wildebtw]

Also what's your take on these premixed fuels? worth it?

[@Ancient_Iron]

Love the wrap handles! It is a pitty that Stihl in all their wisdom don't sell them in Europe among big log dogs.😣 Have to order them overseas. Greetings from Finland.🇫🇮

[@johncurrie1789]

Your starting procedure is spot on!😂🤣😂

[@gordoxium]

I bet there is no shortage of firewood when you're friends with any of you guys😁

[@tjh_8913]

Like the gear review format. Would like to see more about your other tools too, axe, fallers belt, rigging etc.

[@jimmy5F]

According to Buckin' Billy, if the throttle quits responding, just let it idle a bit, because it self-adjusts.

[@yenerm114]

39:30 😂😂😂😂😂😂😂 hilarious bro

[@joeyknuckelz]

Flimsy? That's the anti vibration system working like its designed to. Its made to absorb motor vibration with rubber pads so your hands don't.

[@brycemcintosh1588]

I didn't see this video until just now. I bought the 500i Monday. Just got done bucking down some giant c woods. I agree freaking awesome!

[@geraldmoore3686]

I definately would like to see the modification.

[@conradphelps9389]

yes

[@timhart2652]

Yeah go to hotsaw101 he has 3 of them all different ports on them to he's a Oregon boy

[@تقلباتالحياة-ظ4ف]

@@conradphelps9389 kzbin.info/www/bejne/naK0YZaGZ5KLjMU

[@تقلباتالحياة-ظ4ف]

@@timhart2652 kzbin.info/www/bejne/naK0YZaGZ5KLjMU

[@theponderosa3489]

Watching this in the morning with a cup of coffee. The crotch style starting technique gave me a huge laugh. Great video and review of the saw.

[@matthisnintemann8045]

I definitely want a video how you "tune" them

[@AATreeService]

They are fuel injected. They tune themselves

[@AATreeService]

@Loner Wolf you obviously have not one single clue how that system works. No they don’t have 02 sensor but they do regulate intake air and engine speed. That is how they tune themselves. They regulate engine speed bu adding and pulling fuel. Just like the m tronic system. It’s not just a set rate of fuel, U don’t honestly think that do ya?

[@splitpotrose]

A video about upgrades for the MS500i would be very helpful. The tree felling tutorial was excellent.....Cheers.

[@Jeffery4]

Same

[@austinholm-mcrae2777]

The real issue is that Stihl shut down the factory making the parts for the 500. When it is so relatively new, and they make replacement parts a rarity or even impossibility, it makes the 462 much more desirable. I'm an arborist. They are both easily comparable. I've ran both a fair amount, and I loved every minute of running a 500. I did a 7 acre land clearing job and used the 500 exclusively, but for my personal saw I have to be honest and say that I am leaning towards a 462

[@dieternuetzel3834]

That's not true. They didn't closed the factory.

[@austinholm-mcrae2777]

@@dieternuetzel3834 During the peak covid pandemic that is what they told me. The tree co. I worked for had a nearly brand new 500 get crushed, and when we wanted replacement parts they were unattainable. Perhaps my info was bad, perhaps it was temporarily shuttered, but a Stihl rep told me personally that that was why parts were so scarce.

[@BadAssEngineering]

I would really appreciate a review of smaller Stihl Saws, like the MS361, those are the ones i use to maintain my coffee plantations

[@CS_247]

I love mine, it's a beast. Great saw that eats anything. Could not give a s*** what it looks like tho, I don't go in the forest to pose...

[@donjones7745]

Love the humor at the end of the video, thank you for all of your videos you have taught me a lot!

[@FishFind3000]

8:09 you forgot the part where the saw kicks back and you break your balls...

[@Axeman297]

7:40 - I had to rewatch this part about 30 times. I cant stop laughing.

[@joshmullinnex5113]

That last part was hilarious

[@cspragg318]

I am a fellow Washington Stater......my 462C has that same loose feeling, but has held up well! I now want a 500.

[@diklerskittlefuck]

Stihl wants you to dominate their saws.

[@mattwood9981]

Jesus Jake, I was about to piss myself at the end!! U were killing me. Great video, the studio, garage, shop whatever you're gonna call it looks like it's gonna be nice. U should do a walk around when you're done. And I think I speak for everyone when I say yeah, definitely need a vid of before and after mods!!

[@colsinclair7793]

Lol Hope that was the dog and not the Kids who interrupted you.

[@seoulbrooks]

Yep, not cool yelling at the kid.

[@scottsasanecki4106]

Great review. Your dry sense of humor coupled with the childish male genitalia humor was hilarious. Aside from that I just got a 500i from ripsaw a couple of months ago. It does serious work! I'd love to see video after you souped it up. Blessings

[@phi376]

Please, we need the follow-up modified 500i video!

[@PickIeRick]

Just bought the 550 today. Can’t wait to get it into some wood. Interested in seeing your modifications and your take on how much better (or worse) it runs with them.

[@kennethstephens8046]

First ELECTRONICALLY fuel injected. Jonsered had mechanically fuel injected saws in the 50s

[@WilliamHollinger2019]

I didn't now until you let me know.

[@تقلباتالحياة-ظ4ف]

@@WilliamHollinger2019 kzbin.info/www/bejne/naK0YZaGZ5KLjMU

[@ajbrown2013]

I got one of these and don’t even cut down trees just got it to trim some trees up around my small property and I got to say it’s a nice saw

[@Availablehandle-i1k]

The break-in is kinda important. Three tanks of gas at idle for a ready to use saw according to Sthil 🤘

[@Bredddi]

Yeah … but then I realize I’m mortal and going to Die someday, so I let it idle for about 1min and get on with my life.

[@livingadamman7994]

Man you guys cut like pros, love your work. Stay well and safe Thanks for the great content !

[@gumwap1]

So when does Gordy get his hands on it?

[@DomDaGrizz]

Right?

[@تقلباتالحياة-ظ4ف]

@@DomDaGrizz kzbin.info/www/bejne/naK0YZaGZ5KLjMU

[@barneslawntree4877]

Love my 500! Decimated a large maple tree about a month ago. Very pleased with it!

[@blaykrichardson5390]

The moan from when the hinge gives and the tree falls🤤🤤