World's Smallest DJI O3 Cinewhoop // AcroBee75 O3 🛸

[@AlbertKimTV]

🛒 AcroBee75 HD O3 - bit.ly/ACROBEE75O3 🔋 Lipo - bit.ly/3OyAIHK

[@shadowofchaos8932]

Big camera on the O3 unit. I bet the image is crisp.

[@skyline412drones]

Did you try putting a bi bladed prop on it by any chance?

[@925fpv]

I like how small this one is.

[@AlbertKimTV]

You'll love the AcroBee35 O5 coming out in 2025... 🤣

[@frankcastillo8869]

It will be good to see how this one stacks up against the iFlight Defender16 and Defender20. I assume you will be reviewing those as well?

[@AlbertKimTV]

I hope so... still no word yet from iFlight. Those two products have been delayed about two months so far... not sure why... maybe because of jello issues...

[@charliedcho]

Do I need to install the dji 03 antenna to be able to fly it with the DJI remote 2? Or can I just use the existing 5.8 antenna?

[@AlbertKimTV]

DJI remote 2 and whip antennas work fine.

[@charliedcho]

@@AlbertKimTV yeah has been working fine. Range seems good. Would I get better range if I used the DJI antenna tho?

[@dodongabello1625]

What is the best controller for that

[@AlbertKimTV]

Watch this video... kzbin.info/www/bejne/eqPCi2hsZZKSaJY

[@AsaFPV]

do you think that dji will ever make an fc or aio for these types of drones?

[@AlbertKimTV]

I wouldn't hold your breath...

[@AsaFPV]

Is the 03 mounted upside down?

[@AlbertKimTV]

On this model it is but that part doesn't matter.

[@AsaFPV]

@@AlbertKimTV ok, does that not affect the gyro data or is it mounted in the camera

[@charliedcho]

Thank you for that UART1 info!

[@AlbertKimTV]

Any time!

[@BooFPV]

WIll i need to buy a dji antenna for it to work with the dji remote? I remember seeing a newbeedrone video saying so? Or will changing the Uart enough?

[@AlbertKimTV]

I was able to use the DJI remote but you might only be able to go a few kilometers away versus 100km away.

[@samuelherrera7573]

What is the control to handle this type of drone? Spanish: Cual es el control para manejar este tipo de drone?

[@AlbertKimTV]

The controller I used is in this video... kzbin.info/www/bejne/eqPCi2hsZZKSaJY

[@sol303]

Does it bind with the dji remote?

[@AlbertKimTV]

Not the V1, only the V2 remote. You also have to make a UART change in the settings as I mentioned in the video.

[@shadowofchaos8932]

Is this the first Overview?

[@vanlifefpv6340]

sucks he didn't get to keep it. maybe newbeedrone is running out of money for marketing?

[@AlbertKimTV]

Yeah, I asked them to send me the kit version later and I'll add a naked O3 to it for the next video but I have no ETA at the moment. Thanks for asking though!

[@frankcastillo8869]

@@AlbertKimTV O3 lite version would be nice

[@StealthFlightFPV]

Flight times? Noise level?

[@AlbertKimTV]

About 3 minutes flight time. Pretty noisy... it's a heavy whoop. Aren't all drones noisy though?

[@joshlehr91]

how do i get this to work with the dji rc2? ive been trying for two days now with no luck

[@AlbertKimTV]

I explained it in the video and it's also on the product page. You have to switch the serial connection to UART4 and the receiver protocol to SBUS.

[@frankcastillo8869]

What's with all the fake news comments here? Must be fanbois of some other company?

[@jjbross7473]

Sad that part of the drone is in the way of the camera, such a good camera but u cant see it all, hope they fix it soon!

[@dustinpugh8222]

3.5 minutes is impressive. I love the mob 8 o3 but barely get over 2 minutes. Here💰💰💰 just take all of it!!

[@AlbertKimTV]

More like 3 minutes but maybe 3.5 in ideal conditions.

[@jjbross7473]

Thats a really good video quality for such a small drone, dji did a great job developing that system

[@AlbertKimTV]

Yes indeed!

[@pandrews01]

Albert!!!! Another nice review. I like the small size and the video is as expected...."impressive."

[@AlbertKimTV]

Thanks! 👍

[@vanlifefpv6340]

That new flywoo naked O3 on this would probably help a lot by getting the weight down.

[@AlbertKimTV]

Yes, I plan to make a naked O3 version of this soon...

[@samavella8831]

@@AlbertKimTVLove to see a video on the installation of the O3 onto the Flywoo Naked O3 kit.

[@JS-rh6cs]

Ultra wide Shows a bit of the frame. Is it away after Stabilisation😮?

[@AlbertKimTV]

Rocksteady stabilization is on. The camera needs to be moved forward a bit. You could also try Gyroflow but I didn't have enough time to test that.

[@leomatis_]

How you like it compared with the pico?

[@jjbross7473]

Damn this one is quite small for a cinewhoop, perfect for inboor flying or sum

[@jaechoe]

wow that is a tiny O3 whoop. to bad the frame is in view, seems like they could of extended the camera a tad to get no frame in view. Flies pretty good. Never thought the Pavo Pico looked big, until the side by side with the AcroBee75 O3. What is the average flight time with the Tattu 450mah HV battery? Thanks for the review Albert!!!

[@frankcastillo8869]

he said 3 minutes flight time on that battery

[@jaechoe]

@frankcastillo8869 must of missed it, thank you!!!!

[@sumner407]

Nice review. Digital video just blows me away. It looks great to me. 👍👍😀

[@AlbertKimTV]

Thanks! 👍

[@MCsCreations]

Awesome flying and review, Albert! 😃 Pretty nice looking quad! I love the idea! Stay safe there with your family! 🖖😊

[@AlbertKimTV]

Thanks 👍

[@NonononNo-o1x]

how is the sound compared to the pavo pico? is it quieter?

[@AlbertKimTV]

I'd say about the same volume or intensity but the pitch is different due to prop differences. For some reason the Azi prop sounds more pleasant but I can't explain why.

[@ElRouge_FPV]

Quanto dura una lipo 2s 450?

[@AlbertKimTV]

I'm not sure. I would check the product link below.

[@armandrone9016]

Your review was great though... That bracket appearing in the camera's field of view is really annoying... I hated it!!

[@djdubz]

Great video AK! Looks like the antenna is what's in view on that frame. NBD should move the antenna to the rear or something, so that part isn't in view.... ...Would be cool if NBD sent you one of the production models.

[@AlbertKimTV]

That would be cool

[@AstroNootFPV]

Looks smooth, no jello! Between the Pavo Pico, Mobula 8 and the AcroBee, which one would you recommend?

[@AlbertKimTV]

I think it depends on the application. Seems like there are some who want speed and power and don't care about jello so those guys should go for the Mobula8. Those who want to hit the smallest gaps indoors should go for the AcroBee75. The Pavo Pico is kinda in between for a more wider audience.

[@ChrisParayno]

Wow impressive! Not sure if id go that small but haha dont tempt me.

[@frankcastillo8869]

Something smaller will be out next week... haha

[@sporttyt]

@@frankcastillo8869 wow, what is it model name?

[@DanteKeith]

Wish they would sell this frame without the O3

[@AlbertKimTV]

They will be soon... stay tuned for another video later...

[@POLARISFPV]

Can't wait for flywoo's version

[@AlbertKimTV]

I haven't heard of anything like this coming from Flywoo... did you see a rumor post somewhere?

[@frankcastillo8869]

flywoo doesn't make one. just more fake news here people. move along

[@POLARISFPV]

@@AlbertKimTV no no ,just speculation really. I mean why else would they make a 18 gram 03 if they aren't going to at least release a frame.

[@MFAMvdHelm]

Looking at the specs but I don’t think I can connect a DJI FPV Controller 2 or can I?

[@AlbertKimTV]

Yes you can. I talked about it in the video. Just need to make a uart switch in Betaflight because it's already wired up from the factory. VERY EASY TO DO.

[@frankcastillo8869]

@MFAMvdHelm he mentioned it at about 2 minutes into the video.

[@MFAMvdHelm]

@@frankcastillo8869 didn’t have time to watch the whole video, watching it now.

[@ludofevrier5593]

My future racer😅

[@AlbertKimTV]

LOL, good luck with that!

[@dustinpugh8222]

I also like that it's not a pusher! Great looking quad!!

[@frankcastillo8869]

@@sten6537 Pushers are better, more stable with less prop wash, but also harder to tune for novices.

[@vanlifefpv6340]

@@frankcastillo8869 yeah pushers are way better

[@AlbertKimTV]

This is a pusher format might even perform better...

[@rgfpv]

There is another 75mm O3 tinywhoop called ACK75 O3

[@AlbertKimTV]

Never heard of this one. I did a Google search and it seems there's a frame called Attacking Chicken 75... is this it? It looks like just a frame kit... not a BNF. Is it sold as a BNF anywhere? Got a link to a store?

[@frankcastillo8869]

It's a custom build sold by some guy on Facebook. Costs $850 and the soldering work is amateur hour stuff.

[@timechaser4313]

How does the goggle view look without I.S. on?

[@AlbertKimTV]

Looks like a typical whoop just less responsive due to the weight.