TRANSMISSION SHIFTS HARD SLIPPING. CLEAN SHIFTER SOLENOID CHEVROLET BUICK GMC MALIBU EQUINOX TRAX

[@WorldMechanics]

⛐ Check out our Garage to see what tools we use and recommend: www.amazon.com/shop/worldmechanics ⛐ Subscribe and hit the notification bell by the subscribe button for new videos: kzbin.info/door/J9xpq0qUZevSEdBSFqO2ow ⛐ Our GoFundme Page: www.gofundme.com/auto-repair-guys

[@jamesj8965]

You've saved my ass more than once. Thank you very much.

[@saltriverorchards4190]

Very nice. Thank you for posting this video.

[@t0ny2trill]

Quick question: if you buy another TCM can you ...remove the old solenoids and add the new solenoids with the old computer to avoid take it to get it programmed?

[@gavinryan-oi8zo]

In theory yes

[@t0ny2trill]

@gavinryan-oi8zo it worked ; I got lucky it was a PCS3 solenoid replacement & it low on 2 quarts of tranny oil ; I ordered oem solenoids from China ,with the same part numbers and just use one, out of the set ..for back up; & my code p0796 went away 🥹🤘🤘🤘🤘

[@Noob.master6969]

@@t0ny2trillwhere did you order the solenoids?

[@chefness2000]

It would be good to show how U opened the gear box. Thanx in advance

[@antigensmith4061]

He shows that here kzbin.info/www/bejne/rIXUYn6Mpb5_oNE

[@DavidGarcia-zp3ki]

I have a2017 Spark starting to slip . Code p0841 came up on scanner for transmission solenoid pressure switch. Would I need a transmission flush including pressure switch replacement?

[@KingKaymon]

Hello if my silinoids all read the same at 3.4omhs is that a good reading for silinods in transmission on a 2011 Chevy Equinox

[@chefness2000]

So my gear box shifts hard or sluggish when it gets hot ood after a long drive. What's the cause u think?

[@reeoh6637]

chefkhatib Did you ever find out why it is doing it because mine is doing the same

[@terrynisleit8566]

My 08 NOX has the same issue when hot. I've tried flush and fill with no results. My next move is to see if coolant lines are working properly. Seems no one has real insight into this problem.

[@rockstyle45]

Is that GMC Acadia sle 2008 also can replace solonoid shifter valve same way code P0756 and P0752

[@derekv7070]

P0797 Pressure Solenoid Stuck ON 2013 Chevrolet Traverse What should I do?

[@lordmmx1303]

i just wish you had a chance to work on ZF4HP16 gearbox. mine is shifting nicely on 2-3-4 gear but when I go to stop, it always kick.

[@azulmarinoify]

Hi 👋 Where can I get If I do need to get solenoid for Chevrolet 20011 cruze lt turbo 2.4 ? Thank you.

[@vseduardo]

Greetings, I like your channel, first of all I want to know what is the transmission of the Malibu 2015 2.5 and I have a problem that vibrates at low revolutions just when the speed is going to enter. Thank you

[@naughtybassfishing9087]

Same is happening to mine.. did you find out what was wrong with it?

[@merrittmcdowell8675]

What about hard down shifting of the trans say 2-1 shift when coming to a stop and it slams into first?

[@devinschaffer2750]

Did you find out the the cause cause

[@merrittmcdowell8675]

@@devinschaffer2750 the TV cable was way off

[@jacobwiebe9827]

Mine down shifts really hard ad well did u ever find out what the problem was???? Driving me nuts 😤

[@ray1love1]

@@jacobwiebe9827 did you find out the problem

[@jacobwiebe9827]

I took it to a chevrolet dealer and they said it needs a new transmission after they spent 700$ on fixing the problem they promised would fix it 🤬.

[@hectormaldonado1091]

can you tell me where I purchase pressure switches for a 6t75e? For 2009 Buick Enclave.

[@ghulamrasoolandarabi6667]

None of you been able to do one for 2018 chevy equinox with transmission solenoid code qnd replacing the silenoid

[@danmachen2695]

Only have to remove my engine and transmission. Wow, should be able to knock this out in about 45 minutes.....

[@hotshot1574]

Rite 🤣

[@brap3775]

Lmfao I did it with it all in the engine bay, get good brother 😂

[@emce1303]

Hi have a 2010 Camaro rs and 1 gear doesn’t work and if I Put it in manual I have to start on second gear and it works great

[@nurzharifamecca5112]

thank you for making the video. likee

[@chefness2000]

I did gear box oil flush twice and it helped alot

[@zigzag8429]

Great video! Sorry if this posted twice. I do have a question about my 2014 Chevy Malibu 2.5L 75K miles. Trans RPO code MNH (6T40) never been worked on and never changed the trans fluid. It's the wife's car so I don't drive it much but in the last 3K miles or so noticed when going down the highway with steady throttle if I approach an incline it thumps a bit shifting from 6 to 5 otherwise everything is smooth. Took it around a hilly neighborhood at like 25-30 mph and if holding the throttle steady and going up hill it does not downshift unless I let of throttle a bit to help it. Even to the point the engine is laboring in a higher gear like 4th when it should maybe be in 3rd or 2nd. Is this a common issue you might know of and is there an easy fix. I can turn a wrench and considered getting the solenoids and filter to change out. I know I cannot change the TCM itself as it needs to be programmed. But the AC Delco parts for this are not that bad if this is where the issue is at. I really do not want to take it to the shop for fear of what you have mentioned many times about these shops more than willing to tell me I need a complete trans job. Could you provide any of your thoughts and expertise please? Thanks in advance.

[@johnyoung9874]

I have a 14 malibu and I am having the same problem . I don't know what the problem is. I sure don't waste to take it to a Stealership !

[@johnyoung9874]

My Malibu isn't throwing any codes .

[@hitmanm818]

My mechanic is telling me to change the transmission .. it doesn't want to run from a stopped position then it shifts whenever it wants 2600 for the "fix" taking it in today

[@austinfultz7508]

My 15 2.5 is doing that same thing /: did you ever attempt replacement?

[@kozak1265]

Hi, I have 2017 equinox and it has haziteration and vibration when I drive like 45 and easily apply gas pedal. If I release gas pedal or floor it it's ok.. do you thing it has something to do with these solenoids ?

[@Ranchready496]

Does this include a ‘16 chevy 1500 suburban with a 5.3 ?

[@cousinvinny7990]

my gearbox is stuck in 3rd gear when i put it in drive also has hard shift in to drive and reverse throwing up a po970 solenoid 3 open circuit short to ground code would this be the problem ? it's a vauxhall insignia

[@flip6818]

Cleaned solenoid now car want start getting TCM code. Breaking it back down tomorrow! What can be the problem ?

[@jrrrivas6441]

I have a 2011 gmc terrain and scanner says its torque converter solenoid how do I know witch one is it

[@theripper20031]

Is there a way to remove everything without taking off the main connection off the TCM When I try to remove the main plug the parts of it broke!! So I can't take it off! Can I remove it and work it with the plug on? To fix the solenoid problem I have

[@OldmanJM]

Where is the SDU on the Fiat 500L?

[@bruceanderson1504]

Would bad solenoids cause my 6t70 to not shift

[@LaneHawk]

i’m pretty sure

[@TheLifeOfMartin]

do you have a video testing the TCM on this transmission?

[@brandonbible4093]

I’m stuck at a gas station off I-10 by nowhere. My transmission will not engage at all. How can I fix it?

[@michaeldemon8404]

I have chevrolet travers 2011 sir the problem sir is while running the engine rom is 3000 but the gear is not shift to 5 & 6

[@shibuyateto]

How to check whether the computer on the tcm is working? How to fix it if it is not working?

[@Mano-cloud]

I have found some problem when I shifted from "P" to "R" or "N" to "R", the symptom like jerk what happen? How can I do? My car is Chevy Cruze 2013 1.8

[@ticalion6652]

Maybe broken motor mount

[@johnmule880]

2012 malibu p0752 A shift solenoid stuck open

[@fadik2084]

I cleaned them but still have sleeping on 5 and 6 gear can you help me

[@overthehilldill3626]

If it is sleeping you need to give it coffee to wake it up.

[@t0ny2trill]

Common sense : you cleaned them and did nothing? Replace with new ones or the whole tcm

[@brianyoung4659]

Put new in!!!!

[@NoBody-jo5rj]

The best thing you can do to avoid any problems with this car is just sell it, this thing has endless problems

[@munermuner109]

may.car2015gear.boxspeed.problem