Worlds Highest Horsepower Nissan Titan!!!

[@johnhulbert4377]

I did so much research on trucks because I sold my cummins to downsize to a half ton. I couldn't be happier with the titan. They are such nice trucks and in my opinion one of the best sounding v8's

[@zaynemclearran6200]

And they're pretty quick stock

[@gaugebuseck3375]

Loved mine, and love my m56 even more

[@DhhdjdJdjdjdjdjjd]

​@@zaynemclearran6200pretty quick? I've smoked eco boosts 5.0s and 5.3s

[@Jaimeleon20]

@@DhhdjdJdjdjdjdjjdI’ve smoked 5.0s, 3.5s, and 6.2s in my 5.0 😮‍💨

[@jaimiestroomer1107]

I need a motor setup like this to put in my skyline

[@zanelucas512]

Truck sounds insane!

[@smokiethebear4045]

Great job guys!! In the near future I may just send my Titan off to you but I have to figure how it all goes because I also want to make it a road legal trophy truck

[@terrellgill2619]

I'm more interested in stock Nissan transmission with maybe blipping the shifts

[@vortecturbo]

I built the intake manifold @ Specialty Metal Craft for the owner.

[@jerrodshahid7038]

how much will you charge to make a intake like thise for a 06 nissan titan ?

[@franciscofrontin5072]

How much would it cost me to do this to a 2012 Titan sv

[@vortecturbo]

@@franciscofrontin5072 which part? Whole build or intake manifold?

[@franciscofrontin5072]

@@vortecturbo whole build

[@vortecturbo]

@@jerrodshahid7038 2819072814

[@nigelmcclure4125]

Bro I love your truck bro just keep up with your greatvwork and then show the world that the Nissan Titan can taken to massive amounts of power gains like never ever seen before on a Titan im so dam proud of you guys here Koodos on you guys as A NUSMO fan myself im like dam dude

[@LOGGYDAWWG]

Bro ba bro brooo bra bro broo!

[@ShadowTheSC]

@@LOGGYDAWWG LMFAO

[@ShadowTheSC]

BRO BRAH BROBREERH BRUH LOVE IT

[@THXIIIRTEEN]

Nusmo

[@SM-ii8pg]

​@@THXIIIRTEENNUSBRO

[@z31online]

Very cool. Good work! I made 983rwhp and 974ftlbs on my VK56 twin turbo setup. And man, my brakes were dragging the whole time! I should be well over 1000hp on my setup. Going to dyno again here soon

[@TheDIGITALCANNON]

Anything done to the internals

[@z31online]

@@TheDIGITALCANNON yes. Fully built. No way can the stock block hold that kind of power.

[@z31online]

@@PedroKing99 custom made. No one makes a kit

[@scottcisney7150]

@@z31online Sweet news We got a Armada and might put in some upgrades, Did you have to ,change or modify the trans at all?

[@z31online]

@@scottcisney7150 I'm running a Tremec Magnum-F 6 speed transmission with a double overdrive. I made the custom bellhousing myself.

[@codyt.8463]

How much did this build cost?

[@THXIIIRTEEN]

1000

[@carlosjaimes4141]

Wow. Very happy for yall.

[@ItsDawss]

My truck looks nearly identical but not 700 whp😕

[@dallasmercer3911]

What exhaust setup is Ashton running on it? Sounds clean and would like my titan to sound as good

[@bflores7961]

Now the E85 will put you at 1000. I chatted with my tuner Rich at DynoComp in N Scottsdale and says I’ll have the potential of 1000hp with the Harrop tvs2650 supercharger on it! Let’s race...instant torque vs. boosted turbo power (I personally like turbos, but the supercharger is a much easier and cheaper install, and much more useful on a truck in my humble opinion

[@artemvolnenkotravel]

hello, please tell us what was installed on the vq56 engine: standard block or other liners

[@HighPSIPerformance]

aftermarket sleeves

[@menjivar76]

That’s crazy dude, that Titan is a Beast !!! What kind of exhaust do you have on it? I have an 04 Titan with a Flow Master 44 and I can’t get that deeper sound.

[@beardedtoolreviews7185]

Maybe a super 44?

[@Paul-rz3fd]

Sick ass truck! I got one love it not with this build... lol 😂

[@vortecturbo]

Specialty Metal Craft in Houston did the custom adaptor plates for the bell housing and converter adapter plate. John Harrison

[@juanolvera5802]

where is the shop of specialty metal craft located at here in houston ?

[@vortecturbo]

@@juanolvera5802 yes

[@juanolvera5802]

@@vortecturbo what's the location of it ?

[@vortecturbo]

@@juanolvera5802 we did the adapter plates at specialty metal craft. If you need a quote on the adapter plate stuff you can go ahead and give me a call at 281-907-2814

[@jameshenry2755]

Daniel what was the adaptor plate for? So is this not running the titan trans?

[@kennyruth9300]

Sell Me the kit lol

[@Salvadorherreraofficial]

any update 2022 on this truck getting the tune on point .any track times

[@HighPSIPerformance]

Unfortunately the truck caught fire 🔥 during testing. It is currently being rebuilt as we speak hopefully this year stay tuned to the channel for updates!!!!

[@01489dray]

Yo my guy I need some info from you! About to pull the trigger on boosting my titan! Also currently holding the national record for fastest stock cam 2wd titan 💪🏽💪🏽

[@gutaroker90]

Are you on Titan Tech or VK nation?

[@moosestanggang]

What’s the record?

[@undergroundriptiles7005]

Wonder what happened with this build if it was good and reliable. Never seen a VK with a single turbo also so wondering how all that worked out

[@HighPSIPerformance]

It Burned to the ground unfortunately .

[@undergroundriptiles7005]

Wait what how? The engine caught fire? Im scared of doing this swap now

[@HighPSIPerformance]

The adapter plate to run the GM transmission was not perfect and cause the front pump seal of the transmission to leak fluid onto the turbo crossover pipe Which caught fire after making some pulls on the road and ended up burning the truck down.

[@sophietovar2684]

I want the same horses on my Titan..2006 Nissan titan crewcab..that there sir is one bad mofo...

[@Salvadorherreraofficial]

Sikkkkk set up !! Just wondering why it’s not lowered on nice weld wheels or bogarts 😑 . Hell even some race stars on drag packs

[@jonsolomon4814]

Like the power’

[@FootageFactory]

I’d love to send you my R34, especially since I got it back from the shop and am having engine problems.

[@Magnanimous-One]

3:54 Seen that sneeze. 😤

[@johnnyingram938]

Good job !!

[@lunareclipse5138]

Yo got a question how much for just the turbo I’m wanting around 8-10 how would I achieve that

[@lunareclipse5138]

8-10 psi on a turbo

[@L4T3R_Racing]

What rods & piston combo? Whats the compression ratio? What cams? Sorry im late to the party just trying to figure it all out with this vk56 engines. Ive got a 1200whp gt500 and trying to play with my titan lol.

[@johndoe-ys7nx]

Still about 100hp shy, CFT Performance made just over 800hp a year ago. kzbin.info/www/bejne/d4rKdHeJfqd8r7c

[@Project-gr6zy]

can you post a video of this truck with the dyno correction number

[@bflores7961]

I have simply headers, exhaust, bolt-ones, with a true CAI feeding cold air from the separating frame or the truck’s trim(plastic wheel well) and the steel body of the truck, and a proper dyno tune. She’s pushing close to 550 naturally aspirated engine power...I’ll bet you she can hang with you in a qtr. mile! And she’s not boosted. Are you down? I’m in Anthem AZ if you are. We can race at Firebird Raceway in South I-10 just a few miles outside of Phoenix. It’ll be fun

[@allanb3222]

🤦😂

[@dylanhyde2668]

He can’t race you because this thing caught on fire 😂 so you’re truck is better.

[@HighPSIPerformance]

Don't worry the truck is getting rebuilt as we speak!!! Bigger and Better!!! Stay tuned to the channel!!!!

[@alvarotarango21]

I got long tube headers, high flow cats, full exhaust and a cold air intake , with a nice radiator, and throttle spacer, I also live in AZ I just have no idea we’re to go get a proper tune if you can let me know then will run them lol

[@spencerbrown4817]

What bolt ons are getting you to 550 in a NA vk56

[@wrenmandingo]

Need my truck done

[@jstitan2972]

Badass!!

[@EduardoLopez-xh7jv]

i have one guys, figure it out guys the i will be coming to your shop from pa

[@baldom3559]

Your not the only Nissan Titan with inbay turbo truck.

[@michaelabston2151]

Man I love what you guys did to that truck…. I can’t stop thinking about it and watching the video

[@far1002]

stock trans?

[@HighPSIPerformance]

It haves a gm 4l80 swap

[@oscarncandi2013]

Me when I take off in my titan big cloud of smoke leaving behind

[@oneshotwarnin305]

Man what all is done to this beast?

[@kouaher6700]

I have 21 titan . How much the turbo

[@keithgentrysr3668]

i want to make, my 2017 armada, faster not right but in future and not that fast

[@josearellano3268]

But why a Chevy transmission..??

[@Tankslayer109]

The factory trans in our trucks even with a level ten rebuild just won’t take that kinda power, 4L80 is much cheaper/easier to build, more support for transmission tuning as well

[@josearellano3268]

@@Tankslayer109 ahhhh.

[@LOGGYDAWWG]

I would like the video but 222 is too legendary

[@DadbodTodd40]

Does it still have th 5.6 or is it ls swapped?

[@HighPSIPerformance]

5.6

[@nategarcia407]

@@HighPSIPerformance I need some help building my 5.6 Nissan titan 05 my transmission recently went out I want to build something similar w a turbo should I go gm or Nissan transmission ?

[@GeneG-wk2mz]

Is this truck forsake ? If not who can do the work

[@igotone7185]

Whats 1/4 time n speed

[@michaelabston2151]

Man I need my Armada to get that fine tuning

[@gerardarciga7354]

Cant wait to see the finished product, awesome video!

[@franciscofrontin5072]

How much did it cost you to do this my g

[@adamlewellen5081]

More traction, ripped rollers,

[@downsouth701]

Mine is 832whp

[@danielmottweiler]

Whoa....

[@gustavocamarillo6877]

How much for the same set up?

[@ashtonsser]

About $40k or so. :)

[@davidzaleski8344]

40k? Not a chance in hell. I know fabrication takes time and skill, there is no where near anything here thar would warrant 40k. Maybe 12k. It pains me to say that as i have a titan, they are badass trucks but dont get credit where its due. 40k? Man patch me througg to the owner ive got some stuff to sell to him lmao

[@erikjp92]

Yeah dude $40k sounds legit. Those who dont know what goes into 800hp arent capable of doing it themselves. Keep up the good work

[@erikjp92]

$40k NoT a ChAnCe In HeLl

[@davidzaleski8344]

Or people like eric are the reason shops stay in business, getting to overcharge idiots. 😂😂

[@NismoSupra]

Bad ass

[@HighPSIPerformance]

Thank you sir 🙏

[@nicholasfantini3638]

Yooooooo, I have a white 2011 SL 4 door. I need a duplicate of your turbo kit. Take my money now please and thank you. 👍🤘🤟🫣👏💪😍😍😍