We Bought A TRIPLE INJECTOR For Soft Plastic Lures!!!

[@WorldsWorstFishing]

Triple Threat baits!! Which one's were your favorite???

[@zacharythomas6134]

Those jerkbaits were awesome

[@WorldsWorstFishing]

thanks man

[@fishingwithmax8248]

I like how the video is posted 1 minutes ago and this comment is posted 51 minutes ago 😂😂😂

[@WorldsWorstFishing]

I made the comment while the video was "unlisted"

[@fishingwithmax8248]

@@WorldsWorstFishing ahh ok makee sence now

[@mouafishing559]

You know what u should have the mold maker do? Make that “spru” section look like a senko. So when you’re making those craws, you’re also making 1 senko. So that do you don’t waste so much plastic. Just a thought.

[@P-Rabbit]

this is a PHENOMENAL idea

[@davehughes53]

Just remember Yamamoto took years to perfect the weight , balance and density f his soft plastic s, that’s why they work so much better then homemade or other store bought

[@jbden8180]

Hit the nail on the head with this idea now to find me a mold maker

[@ericsfishingadventures4433]

Good idea, I always hate wasting the materials!

[@Theunknownfishermanofficial]

the lizards at Jarden got to Dave…

[@chrismoloney285]

Just so you know, my wife is going to hate that I found this channel.

[@Blueboi2113]

Best comment lol

[@M3n24]

Imagine that lamination on a trout swimbait it will be perfect

[@WorldsWorstFishing]

oh you know ill be doing that!

[@caileanmccracken9588]

That's what I was thinking, rainbow swimbait would look awesome

[@davidguyton3057]

That is really cool

[@tomhh103]

wow the flukes look amazing. I would dip the tails in a chartreuse garlic dip and never look back. Great video and great information.

[@WorldsWorstFishing]

Thanks for watching!

[@reileesclark3389]

For real

[@Jeffs-Journey]

This "hobby"is costing me a fortune!! haha Those jerk baits are AWESOME!!

[@WorldsWorstFishing]

You got that right!

[@jamiecamden2858]

Those flukes look great! Definitely my favorite!

[@matruthn.m.bassin]

I am thinking on making my own plastics. Inspiration from you sir Do you need to purge the plastic Do you need to purge if you do remelts?????

[@WorldsWorstFishing]

you purge it from the injector after every shot

[@matruthn.m.bassin]

Man those are some Beautiful colors🤙🏽

[@MrBigbadbuck]

😳 Those are absolutely gorgeous! Especially those shad swim baits...Seriously amazing I love it!!

[@monkeymanstones1]

What is the purpose of not scraping the colors which end up on the upper sides of the measuring cups? Does it never mix in properly if it lands there? Does it encapsulate too well to use by mixing in? I've always wondered why you've allowed so much of the color powders and liquids you add to be wasted by sitting in a portion of the mixing cups that don't quite reach the plastic (both before and after you heat it). Thanks for a possible answer, David

[@WorldsWorstFishing]

I don't scrape the plastic on the sides of the cup into the mix on purpose...Then you will have to reheat because those are already set up

[@yt440volts]

Is it possible for you to put up a list/links for where you get all you supplies? From your molds, injectors, measuring cups all of it. Love your videos, very helpful. :)

[@dipyourcar]

bad ass!

[@WorldsWorstFishing]

thanks dude!!!

[@ericsfishingadventures4433]

@4:50 all I could think of was, that's a wonder bread theme right ther! Breaded bass go nutz for that color!

[@johnmitchell987]

Everything looks great and hey how much would all that be plus punch craws and both curly and regular and mondo worms in the jerk bait color

[@anthonysaliers5159]

Those are awesome what would be a good paddle tail mold for laminate

[@s4dg]

Where are the reds whites and blues?

[@CaixadePesca]

Very nice job! Hand made with quality of machine!

[@beauterrell7640]

Where did you get that Fluke tool? I loved the way that came out by the way!

[@jimcoleman9187]

Yes you got a triple! Preheating the block helps a lot! love the craws but the jerkbaits are killer! Lookin forward to future creations.

[@3HandsCustomTackle]

Great job Chris. Can see why you were so excited

[@chrishebert3240]

Those look awesome! Love to start learning how to make these!

[@cloper4]

Those look amazing I would love to see another rod build

[@Markisuncfan]

those triples looks incredible. I have not bought the 1st mold yet....winter new endeavor. Now...what do you do with the triple runner plastics in order to reuse them?

[@WorldsWorstFishing]

you dont really

[@Markisuncfan]

@@WorldsWorstFishing I did not think ya could and keep the color straight. Imma learnin' LOL Thanks for posting these vids

[@dirtyfan76]

All of those were freaking amazing!!! Those craws would kill here in North Louisiana I think. Awesome work

[@WorldsWorstFishing]

Thank you

[@scottbennard]

Those jerkbaits are perfect! Thinking about rainbow trout, baby bass, and lavender shad... omg! I would love to see the ecto craws with green pumpkin back, blue vein, and dirty yellow belly... KILLER

[@WorldsWorstFishing]

its ALL possible

[@wesleynelson4463]

You work magic! I learn so much from watching your videos! Thanks

[@lannyseals2084]

The first run of craws and punch bug was so purdy almost brought a tear in my eye lol for real those are very very impressive looking baits! Smallies up my way would love to see those soft jerk baits, very impressive sir!

[@huntermartin8947]

Where do you get the metal mold

[@joelp3009]

That is cool! The possibilities are endless. Makes me want to learn to pour my own soft baits.

[@adammcdonald611]

That’s awesome man! Love watching all your new creations! Keep it up!

[@jhasenmayo4353]

What would you want for some of those triple jerk shade baits they would kill where I live

[@robhill8197]

No doubt this is amazing for swim/jerk baits. Another interesting application I thought of. If you pick up a crawfish down here in the south, oftentimes their entire outer shell is one color and you can see a darker color inside their body. So for example you would setup pumpkin/black/pumpkin and inject it that way with your outer cups both being the same color.

[@Dashrite818]

I'd like to buy a batch of those flukes. That color combo is killer!

[@Corylolable]

Heyo, just wondering where you buy the molds and injector kits?

[@michaelwalker3608]

I want to know one thing I've been looking and looking and different companies have swimbaits strong they advertise their lot stronger than the others and I see the video the other day where they stretch just baked almost 5 in or more before it broke apart what kind of material are they using and where can you get it thanks in advance

[@gabrielmelchor9603]

The shad you made at the end looks amazing. Do you make saltwater lures?

[@WorldsWorstFishing]

Thanks...I don't specifically make saltwater baits but a lot of jerkbait and swimbait lures can be used in saltwater very effectively

[@joshuaeffinger3501]

Would love to see a color match on a zoom magnum finesse in Houdini color. Caught my PB on one this spring 9.3lbs think it’s be awesome in that mid mag mold. Love your channel!

[@ericsfishingadventures4433]

That shad jerk bait turned out absolutely gorgeous!!! Now make it with a curly tail and about 6-8 inches and you'll have pike and musky addicts(like myself) paying for such a great bait! The results of that were just phenomenal!

[@saltwatersportsman6039]

Looks great what craw mold is that

[@midfloridatactical]

Man! Those baits are amazing. You’re always stepping up the game. I can’t choose a favorite. They all look awesome and they’d all get smashed.

[@WorldsWorstFishing]

Glad you like them!

[@chrisgonefishing115]

@@WorldsWorstFishing hey man! Found a website that sells bait bags! I bought 100 of then just to try them out and they work great! And they are very reasonably priced! Great video man

[@str8dappin]

Just when I thought your channel was amazing, you went and did something like this....and completely took it up like 3 levels! Awesome work! Keep'em coming! As always, Stay safe my friend!

[@WorldsWorstFishing]

Haha thanks man

[@Papaws-Hobbies]

I really like the three color blend. Wow.

[@gpharned]

Nothing better than having someone else do technique runs for you. Thanks for all the tips Chris, they look awesome!

[@WorldsWorstFishing]

No problem 👍

[@SnappySnapfire]

Man that is so cool! Very nice mold!

[@OomptzMusic]

New subscriber here. Do you have any videos that explain how to get set up with the basics? I am thinking of purchasing a AI mold and maybe get a single injector (if it's needed) and basic plastic, flakes, etc. Thanks!

[@ivanedwards6271]

Hi, I love the new triple injection. Well done, and I will have to order. Thanks Ivan.

[@mike06422]

Have you noticed a change in flow rate? i could see the one side of the blending block keeping its temperature up longer with 2 channels on one side. While the other side has the single long channel and could possibly cool off faster.

[@WorldsWorstFishing]

no change that I have noticed..it injects very even

[@binkwood]

Right when I convince myself I don't need a triple injector you put out this!!!! Those baits are beautiful, especially the jerkbaits. I notice you have to really lean on the injector to fill the mold, is there a danger that you push too hard when you get the cavities filled or is it pretty intuitive when you get to the full point and to back off on the pressure? Another question; I just bought my first 5 gallon bucket of plastisol, do you just pour from the bucket into the Pyrex cups or do you have a separate "scoop cup or pitcher", or do you just dip out the plastisol with the Pyrex cups you are going to use and wipe it down?

[@RodneyArrow]

The craws and grass grenades are killer man! Awesome video. I have elbow grease but no triple injector. I’d live to see more of this.

[@WesMcGee68]

The jerk minnows are your best creation. I want to get rigged up and make some of those. Awesome job

[@WorldsWorstFishing]

Go for it!

[@andrewroyal624]

Thats awesome man the jerk shads are where its at for me! Keep em coming!

[@abdh621]

how we can make it harder?? ( for other application ). do you know any kind of materials that we can use.

[@L0rd0fTh3N3rdz]

Very nice! 3 injectors is a game changer. Might have to start busting out a color wheel. Also, with 3 injectors you should be able to make some pretty interesting single color soft lures with amazing color gradients. If you get a chance please show us what it would like taking single colors with 1 being just past clear, middle range and more saturated. Those 3 injectors, artistically speaking alone, offer an impressive amount of options.

[@WorldsWorstFishing]

Good idea!

[@CavanalK5]

Very cool! This is something I’m wanting to get into and ran across several of your videos. All very well done, and informative for any audience, beginner to seasoned pro. I also enjoy hearing the excitement in your voice when you make a breakthrough such as in this triple-shot setup. Subscribed and will keep watching more of your stuff before I dive off into another hobby that I tell my wife “will save us money” 😂 ~Lance from Eastern OK

[@LazySkrimpo]

Hey man long time sub/viewer, do you happen to sell your baits you make if so do you have a website or something of the such? I'm also in Florida, just under Orlando if that helps any

[@BassmasterSKohout]

Sick!! Can’t wait for more triple injector colors.... nice work Chris

[@macklangen9000]

okay these are the coolest baits ive ever seen. what a slammin color

[@landonschroeder9871]

wow that looks so amazing. Really impressed. So cool

[@robertjacobsfishing]

Amazing results. I would name the color on those soft jerk baits Springboks after the south Africa rugby team.

[@ahoj85]

thats very interesting for me, the first thing that came in my mind is, is it possible to get a transparent firetiger shad with this method ? and if so, would it be possible to make a video with this ? thx

[@WorldsWorstFishing]

might be

[@rafasukowski5162]

Hi , thanks for video. Answer please where do You buy silikon / soft plastic ? What You prefere ? Some link ? Brand ?

[@WorldsWorstFishing]

Dead On Plastix

[@rafasukowski5162]

Thanks!

[@envylures5770]

Awesomeness ! ! ! Question tho ..... does the triple injector spacing fit the twine injectors blending block as well ? If so this thing is really awesome 😎

[@el-xakalh_aquiles3127]

Por dios...q maravilla tio..eres un crak Como haces esos moldes?

[@eddiecarter5276]

I like the crawfish colors. i would try the baits too.

[@adamsisson3023]

Do you offer a bundle of blocks, injector and plastisol for sale? Like a beginner package? Thank you

[@gregmitchell3197]

Awesome looking Chris, great job!!! Keep casting brother!!!!!!!!!!!!!!!!!!

[@WorldsWorstFishing]

Thanks! Will do!

[@Thomas-os2jk]

So since I’m just starting so I need to heat up the mold before I put the plastic in it and how long does it take for the mold to solidify

[@jasonpluta3128]

what if u could take the dull injector bulk and put in the mild of the three injector block and shot four colors

[@chriswren3636]

That is freaking amazing man!!!! Awesome job!!! How can I get some of those grass/ craw baits like that?!

[@pedrolguzmanjr.1621]

Good Morning / How can i get some of those swimbait look like Minnow o a Sardine or any other colors

[@mitchellmckinnish9557]

Hands down the best fluke colors I have ever seen!

[@slaterfrei7665]

If you would have had this a month ago it would have been really cool to do a red white and blue color! But all of those baits look amazing and I loved the video.

[@MadcamPlastics]

If i didn't see it with my own eyes i would say that's silly, but that is totally cool and i really liked the orange red blends. How hot did you have to get the plastisol?

[@WorldsWorstFishing]

360 ish..

[@marciobueno6288]

Hello ... My name is Marcio, I'm from Brazil. Can you tell me what material you use to make these baits? Thanks!

[@johnrich9278]

Might be the best looking flukes I've ever seen. Great job!!

[@WorldsWorstFishing]

Thank you! Cheers!

[@keithwadding9303]

Very cool! Love to see like a forest green back / copper vein / pearl white belly in fluke and swim baits. Keep up the good work?

[@keithwadding9303]

Should've been an exclamation point, not question mark. Fat finger syndrome.

[@danielwood2134]

Just shared to my Facebook the guys are going to love this thanks for showing us

[@WorldsWorstFishing]

Thanks for sharing!!

[@anythingadrenaline4515]

Where did you get these molds and triple injector from?

[@adamsfishingchannel514]

Wow!! I am really impressed with these!! Those jerkshads are absolutely top notch!!

[@WorldsWorstFishing]

Glad you like them!

[@p.r.6220]

Very nice... Do you scent them? If so how?

[@hopxins7311]

Ok so the thumbnail got me. Also, considering I’ve been fishing for 18 years or more, being someone that ties flies, makes my own rigs and even melt my own leads.. WHERE HAS THIS BEEN ON MY RADAR! WOW I AM INTRIGUED!!

[@romanhumbertogarciamoreno5163]

Los flucks quedaron geniales ,y los cangrejos se ven interesantes. Pero tu trabajo es genial.

[@justinlong9552]

Some of the color combos you come up with would look amazing as crappie baits!!

[@WorldsWorstFishing]

Oh yeah!

[@justinlong9552]

Yes sir they would look amazing, I'm a big crappie fisherman from the midwest. Would like to see a bait made to look like a juvenile golden shiner

[@SuperRobertheath]

That fluke bait is amazing. All there colors had the exact same transparency. I can’t wait to see what else you can do.

[@chadhwalker]

Those shad are EPIC! Man, that is sweet!

[@dominicksheppard4900]

Have you tried to capsulize the blood strip? If you double up (by stacking on top) thye might loo kreally nice....!!

[@1joko100]

Where can you buy such molds for rubber baits?

[@pugglepuggle]

I love the color shift baits.I live in Connecticut and fish fresh water.I saw those and said.Danngg sonn,they would kill that up here.How can I get some?

[@zackshelton3724]

Do you sell your baits anywhere? I’m digging all of those!

[@1969jimmay]

How long do you let it set up before opening the mold?

[@Thomas-os2jk]

Watched one of your videos a few days ago and me and my best friend are starting our own soft plastics company thanks for the videos

[@WorldsWorstFishing]

Hell yeah

[@FranksDIY]

where do I buy a kit for myself just for personal use

[@CodyB.740]

Absolutely amazing I love the outcome!

[@WorldsWorstFishing]

Hey thanks

[@keeperofthegood]

Interesting approach. Three clears (maybe with some hyper-shift), with Red White and Blue flake maybe :)

[@fredsegarra2923]

Totally organic looking. 😍

[@shulongxiong6885]

I would like to see that Shad color in the crappie jigs, I would buy some too that color came out great on the jerks swim baits

[@markecklund3125]

I vote for the Angling AI Ectocraw! That mold made the technique shine!

[@LostInfernoFireDragon]

Where do you get the molds, and all the stuff to make these.

[@WorldsWorstFishing]

Angling ai molds, dead on plastix for colors and plastic

[@LostInfernoFireDragon]

@@WorldsWorstFishing Thank you, and I really enjoy your channel.

[@NonSophisticated]

As far as triple injection SWIM BAITS what's the largest you could successfully inject? I love the 7.25" open pour swim bait shad but IF that was an injection mold would that be too big?

[@JS-kg3ml]

Well flippin done I realy love the colouring of them hmm my favorite is the punch bugs