WORST MILWAUKEE TOOL ACCESSORY EVER MADE (what are they thinking?)

WORST MILWAUKEE TOOL ACCESSORY EVER MADE (what are they thinking?) In this video we show the #verycoolgang the worst Milwaukee tool accessory ever made in our opinion. This Milwaukee tool accessory comes in most if not all M12 tool kits and makes no sense at all. What is Milwaukee tool thinking by putting this horrible accessory inside their M12 kits? Let us know your thoughts on this Milwaukee tool accessory in the comments section below and if you think it is the worst one they make.

[@fernsnotcrying]

Vince low key flexing his Milwaukee collection 😂

[@VCGConstruction]

🤣

[@treebossmike8818]

Damn Vince you could have sold that for like $15 on eBay 😂 not that these horrible 12v ONLY chargers are worth $15!

[@frenchie1720]

Vince doesn’t have to flex his Milwaukee tool collection. I think we all know if he gets a cut he bleeds Milwaukee Red. 🤣

[@kireetithotakura8874]

Mate, there was nothing low key about that

[@Kilo5910420]

@@treebossmike8818 more like 10$ I got 1 on there now for 14 no takers

[@chrissmith5911]

You know your day is screwed when the boss hands you a impact with a right angle and 12ah battery

[@z450guy2]

I am laughing what to hard at this

[@shrededpudding5921]

the only thing that makes it worse is when a crawl suit and respirator are included

[@williamandrews78]

They make an install screw gun that has a 90, offset and impact snap ring adapters for m12, my favorite one handed screw gun

[@carlosixtabalan3326]

Out of all the languages in this world, Vince decided to speak Truth!

[@virusthewolf]

I absolutely agree with you. My first M12 was a surge when i opened the bag and saw the charger i thought they did a mistake. 3 things in my opinion need to change regarding chargers. 1. Chargers need to charge both platforms. 2. Chargers should charge simultaneously regardless of the platform. 3. Adding the USB ports. I liked how you smashed that M12 charger so, i smashed the like button.

[@fbgism]

I’ve been doing the switch since the new year being a 25+ years Makita guy I’ve spent at least 5grand in 8 months and I’m just starting my biggest complaint with Milwaukee is their charger it sucks every kit or tool should come with a rapid charger and for tools that require 2 or big batteries they should include dual rapid or super chargers Makita has dual charger standard with their 2 battery tools and its free and extremely fast charge time also the back Backpack vacuums doesn’t suck or not good it can barley pick up floor they should re-engineer it with the power or they’re leaf blower motor also they should move the switch to turn on and off to the hand held wand so silly bad engineers

[@xluke2416]

i have tons of these m12 chargers just sitting in a box somewhere because they are useless when you constantly use both m12 and m18 tools

[@treebossmike8818]

Me too 😂 it’s not worth my time and energy to try and sell them for a few bucks on eBay I hate dealing with the penny pinching hagglers on platforms like that 😂

[@canogaparque818]

I take them to the pawn shop and get what i can for them

[@christophercrawford2736]

Maybe you can find a local tool reseller on offerup or Facebook marketplace and ask if they’re interested in buying them off of you.

[@kirk422]

I only own the m12 pin nailer and palm nailer so works for me but Im looking for a rapid charger on Ebay or something

[@treebossmike8818]

@@kirk422 unfortunately there is no m12 only rapid charger. Closest is the m12/m18 rapid charger that is usually included in the premium M18 FUEL combo kits and sells at the Home Depot in store for $80. I’m sure you’ll find someone on eBay that has one for a reasonable price.

[@Jaredbar]

Vince ain’t wrong! The dewalt low tier charger charges 12v and 20v and that comes in every basic kit. Get with the time Milwaukeeeeeee

[@zabt78]

Vince very passionate display of emotions agains the M12 charger!!!!😂

[@hootersroxx]

JL is right VCG, Milwaukee need's to step up there game with at least a usb charging port or two on all their charger's. Epic finish Vince!

[@AntonioClaudioMichael]

I agree

[@elementalfact0r]

As soon as I saw the title of this video, the m12 charger was the first thing that came into my mind. First entering the m12 platform getting one was nice, but before I knew it that number jumped to five of them and now they all just sit and collect dust between my job site and home. A multi-volt charger would bring more utility and be a lot better, thank you for telling the truth and calling it like it is! The sledge hammer scene at the end was hilarious.

[@MrJak427]

It wasn’t hilarious it was necessary!!!!!!

[@05excursionltd]

Vince, you are talking directly to me. Just got into M12 platform and have several of these chargers. No M18 yet but as you said, if I already had the multiple volt charger who knows what I would have.....Preach it!

[@stephenroberson7908]

The M12 only charger is the worst . And for GOD sakes a couple of USB ports and usb-c

[@markbuckeye]

Preach it brother! Also I can't believe you didn't mention the tire buffer - need to buff a tire, Milwaukee's got ya covered.

[@JLShenk412]

My biggest complaint is they don't have usb on there chargers. I'd love a few usbs on my chargers

[@kuangsheng3891]

It would also cost essentially nothing to add.

[@MrJak427]

Yeah you’d be able to charge their magnetic LED lights off it and your phone

[@steveminor7667]

The usb is on the light packout

[@coburn_karma]

M12 Lead Designer: Get Vince on the phone now!!!!

[@VCGConstruction]

🤣🤣

[@traocheckbeforeyoubuy4609]

Also those cases they come with NEED TO WORK WITH PACK-OUT

[@JoeZasada]

Also the plastic tool cases in the combo packs... Why not make them packout compatible?

[@MrJruta]

Damn that charger is Vinces Achilles heel Lol. I get it though, I started with M12 tools and started adding M18s. Wish I had two m18 chargers instead of one of each.

[@MrEricld1]

Great vid Vince. Milwaukee needs a new solution to a jobsite problem. A measuring tape made for the mud. A heavy duty, self cleaning, pull in a great white shark strong measuring tape. One that us concrete and site work guys can use for more than a couple jobs. Kinda get tired of buying boxes of cheap tapes because even the Fat Maxes get wasted. Time for a mud and concrete tape test raw. 😎😎😎

[@treebossmike8818]

Vinsanity you are absolutely positively 💯 PERCENT CORRECT!!!! If TTI has any good sense, they will listen and make the proper adjustment. It’s just common sense!

[@urdumb1001]

Man when I seen you bash that charger with that sledge you instantly became my hero!! I’m an M12 guy, I got a couple M18’s but the M12 is my go to collection and I’ve got 3-4 of those POS chargers in my garage and after seeing you do it I’m gonna go outside right now and put the hurt on one of those little pieces of trash!! and best of all your video has absolutely no dislikes! We’re all on board with you man, love the vids bud keep it up!

[@tedmcdonald3377]

I agree wholly with you, I've used Dewalt tools for over a decade, needed an m12 tool dewalt didn't make, but haven't bought a single m18 tool because i don't have a charger for them.

[@derdude8201]

And why are they doing it the other way round?! If you buy a m18 tool, you’ll get the dual m12 and m18 charger. Sometimes there is even a free m12 battery included to buy you in the other system. BUT most people start with the m12 series before they even think of purchasing the m18 tools. I don’t get it. 100% agree with you!

[@kevinkp7779]

It would be nice if they would, because I just jumped on the m12 platform. Home Depot had the m12 fuel hammer drill driver on clearance for 70 bucks. I couldn’t pass up that offer.

[@radek5690]

Hey Vince, Great point! But I have another point. I am a IT tech and I don"t need the M18 power, my M12 is good enough. But if they included the multi charger, it might get me to buy M18 tools too. That would be a great business sense. Thanks for all your videos and streams. Take it easy and stay safe.

[@np-bl7qc]

I just recently got into m12 and absolutely love the tools. I use Makita and Dewalt but m12 is great for other reasons. My only complaint is the battery system. I don't like the two snap pieces and having the single charger w/o rapid charge is a bummer. I guess I'm spoiled by Makita giving me ONLY rapid chargers.

[@myloopooping]

It makes me sad to the point of tears. I cry in the shower so nobody can tell.

[@reddbeard2030]

😯

[@skye1212]

Vince is right. I have a M12 tool/charger and would have bought a M18 tool bt didn't want to buy a whole kit.

[@KingYang05]

Totally missed the opportunity to put a sawzall through the M12 charger.

[@martylucas8557]

LOL! Love the ending! You just know that almost everyone in both the M12 and M18 platforms has a box of M12 chargers accumulated along the way. I’be been fortunate enough to have two Son in Laws to give an M12 charger to. However, Milwaukee is doing a disservice to themselves by most of us having a box of M12 chargers vs a box of M12/M18 chargers! They’re screwing the proverbial pooch!

[@frenchie1720]

You’re right. It took me a very long time to pick up any M18 tools for that very reason. I have been heavily invested in M12 for a long time but had been very hesitant to jump into M18. I still prefer my Metabo HPT multivolt tools but with a limited selection of those tools I would have picked up some M18 offerings much earlier but I never wanted the extra cost of a charger if I jumped on a bare tool free battery offer.

[@aidanwilliams7464]

Vince you crack me up every time you mention this problem😂😂

[@musicman89503]

He has a very good point. Milwaukee should give him a sales position.

[@theperfectpaintertoolreview]

Definitely agree, I never use my m12 charger.. Always throw all my batteries on my rapid charger.

[@RICHARDSONMRD]

That's Hiting Nail on the Head. Thanks For saying what I always said.

[@vanduailo9598]

I watched this video and felt motivated. my friends saw this video and felt motivated. my neighbours saw this and were motivated. we rent a projector in a big field and my village people saw this and felt motivated. thank you so much for this video. may God bless you.

[@rickwashek478]

Absolutely right Vince, those m12 chargers are old outdated and slow. Milwaukee needs to step up and improve. Milwaukee you got your earbuds in.

[@AC-hq7ce]

I couldn’t agree with you more Vince! 💯% correct! Not worth spending the extra cash for the kit when your gonna be getting a junk of a charger and TRASHING it ANYWAYS! Bare tool only for me! Hey Vince what kinda kicks you got on?!

[@VCGConstruction]

Danners

[@miqueiaz]

Vince, as a M12 guy I absolutely agree with you! It took me almost 3 years to decided to move to M18 platform.

[@mdeamicis]

I literally just did what you said. Baught the 23 ga pin nailer. All they had was bare tool. Baught a fuel impact kit for the charger and batteries. The pin nailer replaced my 18v brad nailer and enabled me to confine my kit to one rolling packout. And absolutely love how the m12 fuel driver disappears in my belt bag. There are other red tools I have considered but passed on because I don't have a good charger for them.

[@JR-ql8bd]

Yep, I throw my m12 chargers away. I use to give them away but no one wants them anymore. It seems like 1 base charger would be just as cheap. Not to mention, the blow molded cases are useless too. Instead of the blow mold put the tools in packout boxes.. that's the reason I got into packout.

[@chazdubs7370]

I agree, i bought the m12 for the garage i work at and it really suprised me how the m12 fuel 3/8" impact does more than the DEWALT 20 volt mid range impact. So i want to step up more in Milwaukee but why when i already have dewalts high torque impact gun and charger. If i got the multi volt charger i would me more apt to buy milwaukee bare tools like you said

[@JonFordWoodworks]

Vince for the new Milwaukee CEO!

[@VCGConstruction]

🤣🤣

[@matthewdevries9577]

Milwaukee is not the only one that does this bosch does the same thing with their 12v tools

[@metal4life1966]

I jumped into the M12 platform just for their led flashlight and 3/8 ratchet. But those ridiculous M12 chargers are silly

[@pedrovalenciajr9280]

I swear, I don’t watch VCG for most of the CONTENT but for the character of Vince 😜 and the way the videos are set up. Really entertaining!!!

[@bradabbate3342]

Dude is the kind of a hole you just have to love Lol

[@reddbeard2030]

That's why He is VCG! It's almost too hard not to watch, lol.

[@jascospeed]

Totally agree! I started with M12 and have M18 tools now, but would've got into them earlier if they packed this multi volt with the M12.

[@billherzog5375]

Been asking myself this question too and I definitely would have bought an m18 tool by now if I had a multivolt charger!!!

[@reddbeard2030]

At least put a USB port on that thing. On All of them. Where are the OneKey Batteries? Dust Extraction Batteries that talk to each other and economically control & sync the tool and the vac. Go Vince! IDK about those Bananas, lol! 🤣

[@theMOTAs95]

Just got into the M12 platform. Wish I got a multi-volt charger, To buy some M18 tools!

[@johnbell1012]

And why is the M12 single charger similar in size as the dual charger? Makes no sense. They’ll save money (I bet) on production if they get rid of the single charger all together.

[@Timothy-NH]

I suspected where you were headed right from the beginning. I think I have 4 or 5 of those M12 chargers, and think the only one that ever gets used is the one in with my installation driver because it's a complete kit. And just a thought, if they wanna keep making the M12 only charger, set it up for 2 batteries! I bet they could do it in the same footprint. Something about the Rapid Charger, 48-59-1808, that I would like to give kudos on: it's the same footprint as the standard charger, 48-59-1812, so that if you upgrade a kit to this charger, it fits right in the case like the original.

[@swbjackson]

I found one of the M12 chargers very useful. I stripped the guts out and wired the battery terminals to two panel mount USB adaptors. I now have an M12 USB charger.

[@hometronicsflllc3952]

That’s a mean Milwaukee flex you got there Vince. Agreed- all the m12 standard charges I’ve acquired on “kit” purchases (because of let’s say a case and or free batteries) are all tossed into a bin, because the 6 bay rapid charger (3 m18 and 3 m12) is really all we run- and it is phenomenal. Finally scooped up the racking kits, installed 6 shelves in our tall boy van- love em’ Keep up the red flex!

[@michaelstewart9308]

The M18 drill/driver combo kit comes with a m12 2.0Ah battery aswell which I think is quite a smart marketing strategy because it makes it much easier and more tempting to get into the m12 platform as you already have a charger and battery. I just picked up an m12 gen 3 impact driver which I wouldn't have considered if it weren't for the battery and charger included

[@PhysiqueGeek]

God is that the truth. I decided to adopt the M12 system before the M18 and the M12 chargers as a whole just bother me. Either the junk kit charger, or the more expensive but still only charges one battery at a time sequential charger. Come on guys. Only choice is the $200 6 port rapid charger. Love Milwaukee, but that annoys the hell out of me.

[@mreinecker]

This is due in part to why I bought a dewalt framing nailer. I couldn’t justify the Milwaukee because it didn’t come with a battery or charger.

[@MikeMoore03]

@vcg construction I agree. I have 3 M12 chargers just sitting around and have 4 M12 M18 dual charger I use instead. Thay could at least make a M12 dual charger.

[@Duhzmin]

Just bought my first M12 tool and it came with a 1.5a and this charger. I couldn't agree more!

[@Invisible_Poop]

I'm using that single M12 charger for the past 6 years working in the automotive field. I charged my M12 9Ah battery once a week. No complaints, works great.

[@inouveaution]

I was able to use the M12 solo charger for recharging the m12 compact vacuum battery since it lives near the broom and mop in a utility area. The compact vacuum is like a super dust buster, good for around the house. I do wish they only made the multi-volt charger, however, it reeks of saving a buck and doesn't promote just buying all their platform.

[@justincorneau594]

As soon as Vince hears the word Milwaukee he goes crazy 😝!

[@Casper10M]

Facts. As an apprentice I stared on m12 as I stepped up my game I wanted to step up my tools and walk in to m18 but I couldn't unless I bought the whole kit to get the charger

[@WarPigstheHun]

It takes more to redesign stuff than just continue producing the 12v/18v. I'm getting the M12 tomorrow. I don't mind because I don't have any 18v tools. But I agree, its somewhat annoying that the 20v has the 12v charge option, but not vice versa.

[@jdreynolds29]

I have a bunch of them for sale on marketplace.... Left over from selling tools and batteries out of tool kits that nobody wanted the 12 volt chargers... I've lowered the price down to $5 and people still didn't buy them

[@VCGConstruction]

🤣👍🏻

[@Cankoda15]

I’m in this exact situation. Adopted the M12 line not long ago and am loving it but don’t have the budget to pull the trigger on any M18 combo kitsch and passed on a few tool only plus battery deals due to my lack of a charger....now I I had a charger, may have been a different story

[@steverogers2059]

Yo Cuz !!! Watching you smash that m12 charger made me feel great!!! I gotta go to the Depot tomorrow and grab a sledgehammer!!

[@VCGConstruction]

🤣👍🏻

[@kirk422]

Just got my m12 pin nailer bare & m12 palm nailer kit unfortunate came wit this so works for me now, Im gonna go rapid!

[@kcspeed9980]

Your so right about the charger. I’m looking at getting some m12 tools. I’ve used the 20v dewalt tools for years but I could be persuaded by a good deal.

[@Therealphantomzero]

You make it they make it, oh yeah where is that track saw!!!!?

[@VCGConstruction]

Can’t wait till June! 👍🏻

[@Therealphantomzero]

@@VCGConstruction .............

[@shalebieber6111]

We need a rapid charger for the M 12 line!!! Very badly!!!! Let alone the fact they done even offer you the option to charge M 18 batt😢 why ???? I love the product ! We need multi and a rapid🙏❤️

[@deadman12078]

Yeah I agree. Bought an M12 expansion ring for PEX kit with M12 3 xc batteries. It came with a 12/18 charger. Thought I'd never use the 18v but within two years I was using both

[@tannerw3418]

I really love the slow zoom😂 really drives home how garbage the charger is. Plus if you think about it they can’t be saving much because if they stopped using their raw materials to produce the m12 charger and dedicated everything to making the multivolt I’m sure it would pay off

[@winmontero]

@VCG CONSTRUCTION thanks for all you do!

[@steffendetrick9403]

I could not possibly agree with you more. I’m on the M18 platform and I’m slowly building my M 12 collection it was definitely persuaded by the multi volt charger it makes it a practical and seamless addition. It also makes the M 12 charger ABSOLUTELY WORTHLESS!! And a complete waist Which is ironic because I acquired M 12 tools to utilize the multi volt charger because I hate waste.

[@jasonbabila6006]

I don't have any M12 only battery charger, I normally get the bare tool only and I have two 6 slot multi battery rapid chargers.

[@VCGConstruction]

Makes sense Jason!

[@shawnwarner2033]

I felt the same what when my battery chargers, hammer drill and impact all 18v Milwaukee were stolen with my entire backpack of hand tools. Because the 12v system was cheaper and more convenient for what I do I bought it. I still have no charger for my 10 18v batteries which run my sawzall, hackzall, flashlights, circular saw and, oscillating multi-tool. It is highly aggravating that they don't offer the dual system charger in their kits.

[@adambomb7331]

M12 charger...thought it could be the case. Arguably they did innovate, and you can charge via the power source that comes with jackets. I'd say all the chargers are outdated. All should have USB A & C ports.

[@paulp.l.4869]

Absolutely right! I have 3 of these and I never use them. I use my 4 multi voltage and 1 M18 only chargers.

[@awesomeness1113]

I'm with you Vince. Cant understand why they dont just do away with that charger. Would love if my m12 kits came with combo chargers.

[@vicentezaldivar5152]

you always right Vince!!!!!

[@VCGConstruction]

Thanks Vicente!

[@802Garage]

I will say, while I totally agree with you from a marketing angle, I'm one of those weirdos who has DeWalt 20V and Milwaukee M12. Having the chargers with the slot I don't use would drive me nuts, hahaha.

[@cabletieperformance]

I need to make a coffee to get the job done!!!! BOOM!!!! *NOTHING*

[@MyGuyKirby]

Agree with you comments, funny thing the FLEX cordless polishers are 18-volt and their smaller brother (12v ) all share the same charger

[@michaelelder5432]

Sound logic to me. My milwaukee tool collection actually started with a purchase of the m18 string trimmer. Now I've got a mix of m18 and m12 tools that I got mostly through the bare tool + battery promos available from time to time.

[@jonvansile]

I smashed the liked button because Vince makes sense and Milwaukee doesn’t!!!

[@TheJttv]

The m12 chagers fits in the soft cases and skinny boxes.

[@kingofthecrease30]

exactly....good point 👍

[@danielduncan6370]

This dudes ducking awesome. I don’t give a dam avout tools yet I still watch religiously lol

[@superdave103harley]

Oh my goodness YES I have same complaint!!

[@salvadorruiz2680]

Absolutely true. I love the M12 it’s really comfortable in my hand. And I thought about going Milwaukee across the board as I am redoing my garage and tools. If the chargers were an all charge in one I wouldn’t have even thought about it. To bad for Milwaukee. I just moved into my house and dropped a lot of cash into Dewalts pocket.

[@chrisschroeder775]

I completely agree Vince. I Hate that M12 charger.

[@andyc5612]

Vince is absolutely right yet again. Ditch the 12v only, save there pennies there. And put the multi volt charger with the 12v kits. People using other brands would be more agreeable to buying an 18v tool with a free battery on a sale if they already have the charger. I love my Big Red tools, I have a workshop full of them, come on Big Red listen to Vince.

[@terry504able]

Just putting myself in Milwaukee Tool shoes for a minute. M12 kits are generally cheaper than M18, why should we put the more expensive chargers with the cheaper kits? I want customers to buy more M18 tools so I can make more money, they have more options on the M18 line, PLUS rapid/super charger options.

[@kylebarnhart1998]

This is 100% me. I have all 20v Dewalt tools. I started buying the M12 stuff for my wife and I decided I like them as well. There have been at least 4 situations now where I would have bought an M18 tool because it came with the batteries but didn't because the charger wasn't included and I didn't want to try and get one cheap somewhere else and I wasn't going to spend $99 on the charger at HD. I passed on the tool. 8 M12 tools 4 came with chargers. If one had the M18 charger I would have bought at least 3 of the M18 tools by now. The reason I haven't, I have 15 yellow batteries so bare tool is always cheaper than M18 tool with free battery plus a charger.

[@AntonioClaudioMichael]

I agree the m12 charger stinks they should provide the dual multivolt charger for m12 kits to give options to people buying m12 to get into the m18 line @Vcgconstruction

[@mjc8761]

I agree! Thx for your honesty

[@chadbro1799]

We need Vince on the board over at Milwaukee.

[@sparkplug1018]

Even bigger question, why do the large kits that come with a bunch of tools, and a bunch of batteries, NOT include any of their multi bay chargers? I love my multi bay's, have the M12/M18 6 bay rapid, 4 bay M12 2 bay M18 rapid and 6 bay M18. They're awesome chargers, portable, durable, makes keeping those batteries organized and charged simple, so why not include at least the 2 bay rapid with their large kits?

[@tarikpompy8984]

Big Vince, I 100% agree with you.

[@woodmaxcreative254]

Hi vince Am I Kenya where finding a Milwaukee tool is a night mare. I happened to find one Milwaukee Brush fastener m18 with 2.0a battery at a used tools shop mostly from UK. But the problem I have is the charger. I can't get I locally and exporting from UK to Kenya is Abit expensive for me. I intend to start my Woodwork shop within the year. Am a big fun of you and Milwaukee too

[@kartboarder22g17]

I agree but I think M12 stands for compact and by providing that charger it adds to the compact feeling maybe. I get your point on the multi volt though. I was in M12 first and I needed a specific M18 tool that came with a battery. Yet I had to go and but their multi volt charger.

[@dip45son93]

i never thought about it till now but your right and me being on the M18 and M12 platforms but i only have so much space so i dont even bring my 12 only chargers any more. in fact I have brand new chargers that have been sitting in storage for years because it doesnt pay to use them. its not space or time efficient. and time space and efficiency are key to makeing money.