Worx Trimmer changing spool.

Worx WA0004
Spool replacement for these Worx Models:
WG122 WG150 WG151 WG152 WH153
WG154 WG155 WG156 WG157 WG160
WG163 WG165 WG166 WG167 WG170
WG175 WG180 Series

[@winifredjpittman7551]

Thank you great suggestion about using generic cord. I appreciate you explaining it like some of us don't understand the whole process. You did an excellent job!

[@JimMcLaren1950]

Your welcome. Thanks for posting. Good to know my whole process was helpful. You made my day.

[@tigolbiddies4d155]

Agreed. I watched a shorter video first and got nowhere.

[@mwboscan]

I'm a first time home owner and have to maintain my own lawn. I purchased a Worx mower and trimmer combo. This video explained everything I needed to know. Good job buddy.

[@jimmclaren3085]

Thank you Your welcome.

[@eepkt]

Watched so many videos but after watching your video, no need to watch any video. Very easy to understand, you made it so clear. Especially when nylon wire to be tied in opposite direction on spool and then to twist it to clockwise direction, nobody did like you. I wanted to see how to insert in that hole. You put it in opposite direction then turned towards clockwise. This is called thorough detail. Thanks again my friend. Have a wonderful long weekend

[@JimMcLaren1950]

Your welcome. Glad my video helped. Enjoy your long weekend.

[@Ariel23912]

Thank you so much. I had to watch a lot of videos before I found yours. Your video is clear and concise and easy to see, easy to understand. Thanks again!

[@JimMcLaren1950]

Your welcome. Glad my video was clear and concise and easy to understand. I try hard to make good videos. Nice to know that its appreciated.

[@salmanm6900]

Thank you for the helpful video. I went through several other videos on KZbin that only talked about how to replace the spool with a new one. I'm glad I found yours!

[@JimMcLaren1950]

Your welcome Glad you found my video. Glad my video helped

[@PattyMason-hk3lv]

Thank you so much for explaining this so it's easy to understand. I just added new string to the trimmer, and it works great!!

[@JimMcLaren1950]

Your welcome. Happy my video helped.

[@hollyhamilton1297]

Thank you for solving my problem threading the spool!

[@JimMcLaren1950]

Your welcome.

[@samb8076]

Great vidoe buddy. Your method works flawlessly with workx weed wacker. Thank you for saying me $15

[@JimMcLaren1950]

Thank you. Happy my video saved you money.

[@mermie01]

Thank you wasn’t sure which way the spool goes in

[@JimMcLaren1950]

Your welcome. Thanks for posting, Happy when my video helped you out.

[@sherylldupuis6323]

Thank you. Just bought a pk of the spools. Crap. Now l know to buy the bulk pk of line. Big price difference. Ontario. 🇨🇦🍁💖

[@JimMcLaren1950]

Spools are Expensive but now you can save some money. Ontario

[@sherylldupuis6323]

@@JimMcLaren1950 definately big savings. And we all need those 😁TY🇨🇦🍁

[@debicaron6046]

Thank you for this I was wondering why my line was flying out!! Lol. Thanks again!!

[@JimMcLaren1950]

Your welcome.

[@JanConavay]

Much easier to understand than the manual!

[@JimMcLaren1950]

Thank you.

[@angelitorivera6976]

Hello! Thank you very much for the detailed explanation and suggestions! Great!

[@JimMcLaren1950]

Hello. Your welcome. Thanks for posting.

[@dw7922]

This was well done. Thank you!

[@CruzGarcia-p2v]

I bought a work trimmer. It’s a pain in the ass. You gotta order replacement cartridges, whispering already on them you’ll never stop paying for the replacements. The first thing that went out with a string advance, I got rid of it and got me a Ryobi and all you have to do is replace the string you do just get regular string for it easy to install.

[@JimMcLaren1950]

Thanks for posting.

[@rogerabram5108]

Thank you! Lots of useful information.

[@jimmclaren3085]

Your welcome.

[@kennymcats]

This worked great, thanks!

[@JimMcLaren1950]

Your welcome.

[@tonybell2419]

The 'Free trimmer string for life' is misleading, as the shipping for the replacement spools is 5 times $$ what it should be based on weight.

[@crystalborne8315]

I just received my order and it cost $10.12 after tax for 6 spools...Ontario.

[@scottpope162]

$10 shipping is a lot cheaper than paying $42 for 6 spools. It said in the video $14 for 2 spools.

[@flowerpower6949]

Perfect video. Thanks Jim

[@jimmclaren3085]

Your welcome.

[@IamDoogy]

Very helpful. Thanks!

[@JimMcLaren1950]

Your welcome.

[@ashtonmartin8095]

0.95 gauge works too, and lasts a heck of a lot longer than 0.65, great cost saving hack either way with the 0.95 you cant fit it through the guide hole inside the spool, and must use one of the temporary holding holes to start the wire from, and it cannot be pushed through from a parallel orientation, it must be guided through the holes from an end Bit more involved, but whacks through anything

[@JimMcLaren1950]

Thanks for posting. Very informative.

[@debicaron6046]

Great video..Thanks for the help.

[@JimMcLaren1950]

Your welcomd

[@maxwired2235]

Really helpful video, well done, Thx. Just subed!

[@JimMcLaren1950]

Your welcome. Thanks very much for subscribing .

[@Fireplace-si7xb]

Thanks. very good instructions

[@jimmclaren3085]

Thank you.

[@woodsmanforlife1677]

Outstanding!

[@JimMcLaren1950]

Thank you.

[@PaulPaul-ym6hu]

Thank you my friend

[@jimmclaren3085]

Your welcome my friend.

[@eileensongs]

I have the 3-in-1 weed wacker can I get a lifetime replacement of the spools. I got six bowls just for the shipping cost which was $9.99, I believe.

[@jimmclaren3085]

Thanks for posting.

[@Mk56b]

Thank you it worked.

[@jimmclaren3085]

Your welcome.

[@coolop16]

Thanks for the info.......I have a WG155.

[@JimMcLaren1950]

Your welcome

[@thomask3222]

@@JimMcLaren1950 great video, thank you very much. Clear and concise.

[@JimMcLaren1950]

@@thomask3222 Your welcome.

[@setholivier4862]

Thank your❤

[@ranst4038]

Does anyone read the manual, why do I never have to use the line feed. But why does the line disappear so fast. Every time you let off trigger & stop, it feeds 1/4 inch of line out automatically.

[@IamDoogy]

I haven’t received mine yet. That’s some helpful information. When I run it, I will let off the trigger less frequently so I don’t waste line. Thanks for the tip off. I’m guilty of not always reading all of the manual.

[@justtester_9962]

What a load of crap! Yes the instructions should be read, but when your last trimmer (Black & Decker) didn't have that feature that I'm aware of, you don't think that every stop and start feeds the line needlessly. lol Still F*dup after going through 2 spools in less than 1/2 hr. 😠

[@TheeHolySoldier777]

Not going to lie I've been locking up the line and never use the auto feed for like 2 years. Solely because I didn't know about the line feed. I don't know if I've ever seen the manual for my trimmer.

[@swolverine4513]

I would look for stronger quality spool 🧵 line with a water 💧 logo on it soak it 24 hours and that will help with making your line strong with less snapping

[@elofton777]

Thanks!

[@1954bmhnurse]

I have been loading my trimmer spool correctly but within less than 5 minutes the entire spool empties out across the lawn. What am I doing wrong. ? So frustrated!!

[@JimMcLaren1950]

Are you using correct diameter of line. Make sure the spool piece is snapped in place. Is it the Work Trimmer you are using or different model.

[@ahmedalmaghribi265]

Do you have any idea to change it automatic feed and thank you so much

[@JimMcLaren1950]

On my model I had to remove the spool and the line was tangled. I had to rewind it. Clean and debris in the spool. Make sure the line is feed in the direction it shows on the spool. ( Indicated by an Arrow symbol ). Also you have to make sure the string is the correct size or it wont work.

[@katelynncairns9926]

if you belong to worx spool program all you do is pay for shipping all spools are free

[@JimMcLaren1950]

Thanks for posting.

[@ScottMartinD]

Do you find the "Twisted" replacement line to be better?

[@JimMcLaren1950]

About the same. Didn't see much of a difference.

[@ScottMartinD]

@@JimMcLaren1950 Thanks.

[@JimMcLaren1950]

@@ScottMartinD Your welcome.

[@juliel.bateson4971]

bought the replacement spools from Worx and ever since my trimmer is messed up. The spool keeps getting messed up 🤬🤬🤬

[@patriciaverricchia8410]

I have string that is stuck up in the head how do I get that out

[@JimMcLaren1950]

I had string stuck I used pliers to remove it.

[@pedromora4931]

How do you make it feed the line automatically

[@JimMcLaren1950]

Once you install spool it will automatically feed.

[@Richard1914418]

What line can I use for a worx model WG 160 , 20 V Max lithium?

[@JimMcLaren1950]

Line size 0.065

[@ahmedalmaghribi265]

But it doesn’t feed automatic that’s the problem. We have to change it every five minute.

[@lanceradue]

Hey, thanks for the video! Do yourself a favor and sign up for Amazon's affiliate program and put a link in your video description! You could have made a ton of money for sharing this simple video!

[@JimMcLaren1950]

Thanks for telling me about Amazon affilate I will look in to setting that up.

[@michaeloduber9102]

I have a question for you Sir. I have the WG 163 GT3.0 and i wonder if I may clean it with a water hose after a few hours of use. Of-course it has a water pipe pressure.There is no comment on this anywhere. i have asked many time about the cleaning method of this trimmer and the only answer i had was to leave it as is. (Leave it dirty )

[@JimMcLaren1950]

I would be worried about getting the motor wet. If its not sealed water may damage it.

[@exfed480]

Add your own line...lol...you don't t need the whole spool....😂😂😂

[@mikegellner2253]

Got 10 spools and 2 caps Amazon $25

[@JimMcLaren1950]

Good price.

[@lauralab7032]

10 for 10 bucks on Amazon.

[@JimMcLaren1950]

Thanks for posting.

[@docdew50]

Rename this video. Worx hack for rewinding line saves $.

[@jimmclaren3085]

Thank you Good idea.

[@michaelbarcz326]

Dude your video was 6 mins too long. 30 seconds should explain how to put a spool in and cover it!!! You’re not building a rocket 😅

[@GP-ru1bt]

Then you make a 30sec video. Easy shit

[@michaelbarcz326]

@@GP-ru1bt I did easy shit

[@Atrainswrld]

​@michaelbarcz326 where is the video? I checked and it wasnt on your channel

[@maryvega6446]

Yes to long

[@kmurphy739]

What a overkill vid man...wtf were you bored?????