Wowgo 2s VESC Mod for Insane performance and Configurations // Part 1

[@mrgee918]

Hi, how about a follow up video on performance and programming. Thanks

[@PeterKornum]

Take a look at the metr app (require his Bluetooth module) it’s really good both for configuration, BUT ALSO FOR LOGGING YOUR RIDE! It gives you a diagram of everything that happens on your ride, and show it on google maps! IT ALSO CAN EXPORT A OVERLAY FOR YOUR VIDEO! that’s almost the best part...

[@DroneMesh]

Thanks Peter.. Saw it and will be doing that and more on logging and detailing everything I am doing for the community.

[@Kevin.OBrien44]

My wowgo 2s is suppose to come on Tuesday

[@MCsCreations]

Looks like great components, dude! 😀 I always wanted to make something like that too... After you do it, maybe I go ahead and do it too! 😀

[@davidvaknin3801]

i just ordered 4 tekko 32 escs. hope they're as they seem on your tests. im curious to why you dont test and sell AIKON escs. they're supposed to be top notch. and ...i like your shop site. did you designed it yourself or had some company build? thank you. keep up the good work

[@kingyfpv4787]

Hi m8 wondered if you could help me please.. I got flycoulor raptor 30amp on your recommendation but got a problem my rig takes off and can fly for a few seconds and then flips out to the right..it flew perfect un till swapping esc on all 4 motors nothing changed just swapped esc it's not a instaflip...So could it be a bad ESC? Cheers and happy flying to all people;)

[@DarkHorse72]

Very interested in seeing this mod and braking curves tunes. Can this do push to start like Meepo esc?

[@michobby2506]

New links of the two products in video: Remote: michobby.com/collections/vesc-based-controllers/products/superesc-based-on-vesc-speed-controller-4-12-hardware VESC with Canbus: michobby.com/collections/vesc-based-controllers/products/dual-vesc-with-2-vescs-and-1-can-bus-connector

[@CanadianDroneHub]

nice as always

[@dalerobertson911]

What happened in the end? What was the results?

[@Alvin-ti3fw]

Can we use drone esc? those big esc for esk8? Would be nice to use BLheli32 or DSHOT HAHA 😂

[@dronereviewman9580]

Dam those are big!!! 👍😀👍

[@junito1957]

COULD YOU PLZ DO A VIDEO ON HOW TO INSTALL A GPS SYSTEM ON A FREESTYLE OR RACER QUAD? PLZ I LIVE IN Puerto Rico AND IT COULD GET PRETTY WINDY AT TIMES , DONT WANT TO LOST MY FREESTYLE I CANT AFFORD TO GET ANOTHER QUAD! YES I KNOW CAPs BUT IT TO GET YOUR ATTENTION! , sorry =(

[@bennieleip579]

What is the most best cheap board you know of?

[@danielribeiro2113]

Damn man u seem to know your shit so I'mma ask . I have a wowgo2s vsc working with the meepo board hub motors. Would it work with 6335 190 kv motors from torque boards. Basically I want to convert it to belt driven . So I can swap between hub and belt by just changing the trucks .

[@DroneMesh]

Dirty Ribz No it won't work.. Because you need to program the ratio.. the Chinese meepo wowgo esc's are set to 1/1 ratio.

[@rickjames8897]

Build a quad with those!

[@DroneMesh]

These can be used for x class setups.

[@ontoknow18]

It seemed like to me somebody want to go to the emergency room

[@nadoushkaautaibi376]

Nice

[@BuzZ.]

Just use motor from Tesla car. It would be extra strong and really fast !

[@KrotowX]

Those are e-bike ESC's, not for quads :)

[@stoiczfpv]

interesting

[@danielv6234]

this is sooooo siqqqqqqq

[@beatabortel7680]

2'

[@followthelight69]

I'm thinking of getting the Meepo but would like to build an electric skateboard if possible. Can't wait for the update vid.

[@DroneMesh]

I just installed the first ESC and got the config to work today. I already see a huge performance boost.