Wrangler Engine Ratting Noise | Wrangler 2.0 engine noise | Jeep Wrangler 2.0 engine rattle noise

  Рет қаралды 2,109

auto CR tech

auto CR tech

Күн бұрын

Пікірлер: 15
@ryanscott7222
@ryanscott7222 7 күн бұрын
How many miles was on this when it failed ?
@gsw0885
@gsw0885 2 күн бұрын
I have the same problem, but sometimes engine gives a visible 'THUD' noise on start, a couple of times. Also feels like engine misfires ever so slightly only on start. Did this behave the same way? Already changed spark plugs & ignition coils.
@autoCRtech
@autoCRtech Күн бұрын
If there is a similar noise, it is most likely a tensioner fault. ( please note, if engine light is appearing on cluster please read DTC)
@rafaelcerqueira7348
@rafaelcerqueira7348 16 күн бұрын
The noise was occuring on idle without load? I´m having a very similar noise but only with load around 1500RPM, wondering if can be the same problem
@autoCRtech
@autoCRtech 14 күн бұрын
Does your car have engine vibration?
@233teddy
@233teddy Ай бұрын
I have a question. So, I am currently trying to get the front cover on my jeep off and am having trouble getting the balancer pulley bolt off. Now my question is the bolt reverse thread?
@autoCRtech
@autoCRtech Ай бұрын
Which bolt are you asking about? If you are asking about the crankshaft damper pulley (22 size socket), that means it should be loosened normally anticlockwise like all the bolts
@233teddy
@233teddy Ай бұрын
@@autoCRtech yes, the 22mm for the crank pulley. Thank you! Yes I am having trouble getting the bolt off I was just wondering if I was going to the right direction lol.
@autoCRtech
@autoCRtech Ай бұрын
If you try to remove timing related components, set the timing mark before removing the relevant parts of any timing, then try to lock the camshaft sprocket, because if you remove the Tensioner without locking it, timing is likely to be the jump
@stevenguyen7903
@stevenguyen7903 2 ай бұрын
It is in the timing chain, Have to replace the tensioner in the chain
@autoCRtech
@autoCRtech 2 ай бұрын
There is no need to change the timing chain, if you have doubt, change it
@MrAcousticfanatic
@MrAcousticfanatic 2 ай бұрын
I have the same sound, but it goes away when it gets to operating temp. Not sure what it is.
@autoCRtech
@autoCRtech 2 ай бұрын
If your car has the same problem, it will be the same tensioner fault
@Robsoccasionaltravels
@Robsoccasionaltravels 2 ай бұрын
⁠@@autoCRtech even if it goes away like prior comment said? I have similar sound when I start my 2021 Sahara with 2.0 turbo but sound goes away after a minute
@autoCRtech
@autoCRtech 2 ай бұрын
If you hear the same sound as in the video above, it's a problem with the tensioner. Sometimes a slight noise comes from the turbocharger in cold conditions, this is normal. During that time there will be rough idling. This is because the engine comes up to operating temperature quickly. And there is no problem of vibration in your car, right?
Players vs Pitch 🤯
00:26
LE FOOT EN VIDÉO
Рет қаралды 126 МЛН
Haunted House 😰😨 LeoNata family #shorts
00:37
LeoNata Family
Рет қаралды 12 МЛН
clicking noise from brake | clicking noise when moving
3:55
auto CR tech
Рет қаралды 246
HOW TO: Make your Jeep Wrangler 2.0 sound BETTER.
16:47
Ben and Brandi
Рет қаралды 47 М.
Changing spark plugs on a Jeep Wrangler JLU 2.0 turbo
16:06
Black Flag Adventure
Рет қаралды 10 М.
Rewind Series | Jeep Wrangler JL 2.0L Turbo vs 3.6L Engine Comparison
11:21
Engine Squeaking Squealing Noise On Start UP
15:58
Toyota Maintenance
Рет қаралды 28 М.
The All New Jeep 4xe Makes Weird Noises
5:07
Mike Missak
Рет қаралды 18 М.
Vibration At Higher Speeds -  Found & Fixed - Possible Causes Listed
10:49
Jeep Wrangler JK Engine Ticking Noise Repair
16:51
Dark Raven Works
Рет қаралды 21 М.
Players vs Pitch 🤯
00:26
LE FOOT EN VIDÉO
Рет қаралды 126 МЛН