DIY HANG ONN BRAND TELEVISION WALL MOUNT TUTORIAL DEMONSTRATION [HANGONN TV WALL MOUNT]

[@reggiegrisham3910]

Thanks

[@DIYTechnician]

No problem

[@OHhhhhh22]

It helped a lot to me..Thank You❤

[@DIYTechnician]

You're welcome 😊glad it helped.

[@1234circle]

thank you, that was helpful

[@DIYTechnician]

Great to hear that. Thank you for taking the time to let me know

[@kevinqbc]

You got the TV brackets on the wrong sides. The tilt adjusting knobs should be facing out not in.

[@DIYTechnician]

Ok thanks

[@shatteredreality87]

Yea I put mine up 5 minutes ago and did the same exact thing, I figured it out real quick when I tried to tilt it downwards 😆 lol.

[@rubendelarosaii5713]

I think your mounting plate is upside down. The warning label is upside down and also those little notches that are on the ends I believe are so the TV wont slide off the end if someone where to push it I realize this is a 2 year old video. Hopefully that hasnt happened to you.

[@DIYTechnician]

Thanks for the tip. This one worked out well for me for a long time but don’t have it anymore. Appreciate your input.

[@lizeth4571]

Does this work on a curved tv?

[@DIYTechnician]

I’m not sure.

[@tajthekidd999]

They got náutica beds 😮😮😮😮😮

[@dioncortez7479]

Rite. I'm googleing rote now 🤣🤣🤣

[@jims162]

But he got no sheets.

[@bcbuys]

do you have to use spacers on the back of the tv?

[@DIYTechnician]

Not sure if it’ll without but worth a try. Could always use some Washers

[@kerilaguerre7640]

None of the screws that came with the kit fit properly with the tv. either too long or too short. Even when using spacer and washers. Is it ok to have a little space or should it be tight to the tv?

[@DIYTechnician]

I would say it needs to be tight with the tv to be safe. Do you have any washers laying around that can be used as spacers? I think they tried to make a one size fits all but it’s a one size fits most.

[@DIYTechnician]

My fear using the ones that are too long could cause it to wiggle and eventually possibly unthread aside from maybe being a little wiggly.

[@codgod3085]

I have this mount how do you slide tv left to right

[@DIYTechnician]

You should be able pull on the strings to release the tension than slide it to the right or left but be careful not to drop it:)

[@ceciliagutierrez1389]

This is only a up or down tilt, you can’t slide left to right.

[@necrozfynezt]

​@ceciliagutierrez1389 it slides left n right . Mine is a 55 inch tv I can slide left or right 5-6 inches ro my left or 5-6 inches to the right

[@jresparza1470]

Do I have to use the studs?

[@DIYTechnician]

If you can try to get at least a couple fasteners into studs, that is better. It's gets pretty heavy once you put the TV on so putting it just in the drywall could possibly create a hazard.

[@ceciliagutierrez1389]

My holes on the bracket don’t line up at all to the holes on the TV??

[@DIYTechnician]

Are u able to flip them around and try that?

[@itsjustjaz5606]

Llk

[@bradj5642]

Pull it out and go into stud. Why be lazy do it right

[@DIYTechnician]

Good point!

[@jamiedesormeaux7734]

Your wall mount plate would be covering the open hole anyway if you redo

[@donnap587]

I’m sorry you’re not helping me at all. You’re using stuff already existing on your TV and all this is new to me so I need from start to finish. Thank you anyway.

[@DIYTechnician]

Awe bummer. Sorry this didn’t help you more.