Yes and no. There’s a tap point selector but it can’t be different for every bus like on the X32. Generally, this should be fine but it’s just a little different. Great question. Thanks for watching and commenting! -Chad
@kasonkedersha5793 жыл бұрын
@@AWTechTuesday thanks for the response.. so is there any way to have a separate eq through a bus on a channel on the wing? Apart from duplicating the signal to another channel.
@AWTechTuesday3 жыл бұрын
@@kasonkedersha579 It’s very basic but yes, there is an entirely separate EQ option available for sends on the Wing. I don’t have one in front of me right now but I think it’s a basic 3-band EQ.
@kasonkedersha5793 жыл бұрын
@@AWTechTuesday thanks, I'll look for it. The one other thing is personal panning. Do you know if that's available?
@AWTechTuesday3 жыл бұрын
@@kasonkedersha579 absolutely. Every bus on the wing is stereo (assuming it’s patched to 2 outputs). There is a separate pan knob for each bus :)
@ItzTooSik3 жыл бұрын
I’m extremely late to this (hope you’re still responding to comments). I currently have a 31 bandEQ on my pastor’s channel and I want to also use a DEESSER on him. I sent my pastor’s channel to a mono subgroup; assigned the subgroup to the STEREO BUS; installed the Deesser on the subgroup. Yet, I hear as if the Deesser isn’t even active (I already checked that it is active and I even see the sibilance gain reduction but hear no difference). Why do you think this might be? I use an x32.
@AWTechTuesday3 жыл бұрын
By using a subgroup, you are sending level to the De-esser after your channel fader. You may not be sending a hot enough signal for the de-esser to activate. You may want to swap your inserts around and insert the de-esser on the channels and insert the EQ on the bus if you’d like to use both.
@ItzTooSik3 жыл бұрын
@@AWTechTuesday Got you! Thank you so much for responding btw. If I go forward and make the change you suggested would the 31-EQ have the same issues as the subgroup (with signal not being hot enough)?
@AWTechTuesday3 жыл бұрын
@@ItzTooSik Graphic EQs don’t an audio threshold that must be hit to work so you should be fine in that regard.
@henjohn86348 жыл бұрын
Setting up EQ presets would be awesome Chad. I'm new on the Mixer and don't know how to set up a preset so different vocalists can use the same mic. Can you show me or do a video? Using Berhinger X32
@AWTechTuesday8 жыл бұрын
Hey man, thanks for the comment. I'll look into doing a preset video sometime in the future. One word of caution - presets are great but can cause people to rely on them rather than using their ears. Great tool but just try not to be overly reliant on them :) Thanks for watching! -Chad
@henjohn86348 жыл бұрын
+Ascension Worship awesome thanks for the advice! I basically work on a desk that's EQ'd by someone who's away in university a lot so we see him vey little. So any issues are quite stressful. Hopeful using presets can be useful so I don't initially configure the EQ for the worse if you get me.
@henjohn86348 жыл бұрын
+Ascension Worship love your videos!
@AWTechTuesday8 жыл бұрын
Gotcha. After this series we're in right now, I'll look into making a video for you. Until then, a good suggestion for you: any time I experiment with an EQ, if I'm not 100% sure I can make it better, I always start by copying the setting that's already there. - Hit the "view" button on the EQ for the channel you're working with. - With the EQ settings on the screen, press the "Utility" button. - The 5th encoder gives the option to Copy. Click that. Now those settings are temporarily copied. - Play with the EQ - If you're not happy with the changes you made, hit "Utility" and click the 6th encoder to paste the original EQ back on. Now you're back where you started. Hope this helps until I can get a video out for you. Thanks for the suggestions! -Chad
@ItzTooSik4 жыл бұрын
Not sure if you’ll read this, since your video is old. Lately I’ve been trying to fix a “problem” I have on my x32. It seems that when I mute my drums DCA, it mutes the drums on the P16s. Is there a way to fix this? In other words, for me to mute all DCAs (not individual channels), so the band can hear themselves on the p16s, but, I don’t hear them through the speakers.
@AWTechTuesday4 жыл бұрын
The easiest answer to this is to not mute the DCA but rather pull it all the way down. If you don’t want to do that, if the drums are sending to a pre-fade mix for the P16, I’m 90% sure you could go to the setup menu and disengage the option for hard mute DCAs. I believe this will only mute channels going to post-fade mixes. I personally do not like this option but choose for yourself :)
@alphonsodesselle2124 жыл бұрын
you liost me.. bro.
@AWTechTuesday4 жыл бұрын
Alphonso Desselle Questions?
@alphonsodesselle2124 жыл бұрын
@@AWTechTuesday yes.. I think i'm missing some of the stuff before this video.. actually what I'm trying to do is, I have a mic on input channel 1. And I'm using mixbus1 for a headphone mix. When I adjust the fader on channel 1, i don't hear the volume of the microphone increase in the headphone mixbus1. But i hear it increase in my speaker, which is connected to main out L , R. Do you happen to know why i can't hear the change in volume in my headphone mix?
@AWTechTuesday4 жыл бұрын
Alphonso Desselle Sounds like you have the mic set to pre-fade going to the mix 1. To adjust the mix going to the headphones, you’d need to hit sends-on-fader and make adjustments to that mix. Check out this video for more info - m.kzbin.info/www/bejne/qJLLh3WdrN9_bck
@alphonsodesselle2124 жыл бұрын
@@AWTechTuesday you rock!! wow.. thanks for your help. I had actually figure it out watching a behringer video.. But yes on the channel I had it set to postEq instead of Post Fader.. that fixed it for me.. I think i could've done in another place.. but i'm not sure where.. I will check out the video you sent. but thanks for the help!
@keithbusby15724 жыл бұрын
I’m just now finding this channel and I love it! You do an awesome job explaining things. I do have a question about setting up a stereo iem. We have a x32 w/digital snake but we get our mix from a headphone amp (I think is the way it’s setup) any advice?
@AWTechTuesday4 жыл бұрын
Keith Busby Hey Keith! How can I help you with that?
@keithbusby15724 жыл бұрын
Ascension Worship - #TechTuesday Have an email I can contact you at?