Xbox 360s Power Supply Essential Clean Out

XBOX 360 Slim sometimes needs a little help and maintenance.
A clean out every so often can extend the life of your equipment.
Here's what you need to do.
Please visit my Sponsor www.1clickprin...
Please Help the channel with a small donation.
/ retrotechralph
/ @r_t_ralph
Please Follow Me on.
Twitter / retrotechralph
Twitch / retro_tech_ralph
Discord / discord
Facebook New.Retr...
#RetroTechRalph #XBOX360 #CleanPSU

[@uncharteddama9861]

Amazing video thanks to you mate I can play my RGH Xbox 360 man I missed my unreleased goldeneye HD once again thank you so much 😊

[@Nexgeens]

my friend gifted his xbox and its litterrally a cockroach city even the controller has cockroach eggs

[@ekawakademotta21]

I have question I can't solve I Have A Xbox 360 Slim Falcon When I Put It On It Only Show's Red Only But No Sound On The Power Brick Can You Solve That To Me

[@R_T_Ralph]

sounds like a failed psu. try and take it apart and see if any of the caps have gone bad and replace.

[@veeb.m.k6747]

Can we use a hair dryer to take out the dust in the fan ?

[@R_T_Ralph]

it really needs stripping and cleaning. compressed air could work, but a hair dryer isnt powerful enough.

[@mikegenesis7732]

I have complete clean it from the inside. And have for 30 minutes green light and i can play without any Problems. But after that the light turns red. And the xbox turns off. I don‘t understand it, it’s totally clean.🤨

[@R_T_Ralph]

if one of the caps doesnt send correct voltage, that could be your issue.

[@Brandon-7357]

Same problem with me...did you get it fixed and if so how?

[@mikegenesis7732]

@@Brandon-7357 buying a Power supply for 20 bucks. Now the 360 runs perfectly.

[@sackboy9054]

A bit dangerous to take apart a power supply eh?!

[@R_T_Ralph]

if you leave it plugged in, yes. these need to be cleaned out, or its far more dangerous to leave them

[@nestormelendez9005]

It's as safe as sticking a fork in an open outlet

[@lawless5001]

Can’t take of the screws

[@monjox1014]

I don't have a Slim power brick, will this work for the original power bricks? I have a Falcon

[@R_T_Ralph]

not sure, not taken one apart, but i cant see why it should be so different.

[@Ted_Kurt]

thanks for the video! The amount of dust in my power brick fan..blew me away

[@Chawkes420]

What is the type of screwdriver for this if the screw needs a hollow bit?

[@R_T_Ralph]

the hollow bit means its a security bit, so a standard t10 security bit will fit. they are in most sets.