Xenopixel Demo and Instruction Guide Vire Sabers LGT

[@TyTheBlindGuy]

For a blind person like myself, this is the best instructional video that I have found. Amazing work

[@gotenks157]

Out of curiosity. Do you bother with getting a blade, or just just the hilt?

[@CaineTheGamer.]

@@gotenks157 not the guy so I can't be sure, but I imagine having the blade is nice for the weight, as it gives it a full feeling, and his sighted friends can be uber impressed by his skills

[@DemonDarrel]

Feeling extremely late to the party, but I am quickly becoming a huge fan of Vire Sabers and the great husband and wife team who are real, honest and down to Earth.

[@sixstrng]

I will probably never afford one of these, but I love being in the vire saber community. Seeing everyone's lightsabers and customization is so much fun. Everyone is so nice too.

[@sheffieldoutfitters7776]

His sabers and very affordable

[@sixstrng]

@@sheffieldoutfitters7776 100% agree

[@Linus_B]

You can also look into Rebel Sabers or Padawan Outpost, they also have very affordable Xenopixels and good reviews for those on a budget, you just have to find what works for you 😊

[@migi123]

Over 9000% affordable and still have money left to buy lunch

[@ralphbrewster3241]

$100 is a lot for some, maybe young kids.

[@HipBlackPoodle]

Probably the most helpful instruction video. I just got a xenopixel Darksaber and have been very irritated not being able to go to previous fonts, getting stuck cycling from start to finish. Also accidentally changing the mode of each blade. Thank you!

[@AmaryInkawult]

I can tell my friend loves his gift when he wasn't worried about the blade I didn't order yet and immediately started playing with the hilt's features before I got this instruction video popped up and sent to him.

[@MsJedeyeKnight]

Excellent video! I recently purchased an LGT ECO Neopixel lightsaber (has the purple board in the core), and updated it to DD03. All went well on that. I haven't yet added any new soundfonts, though I am really looking forward to doing that real soon. Noteworthy, in my particular case, I found that removing the microSD card to be rather cumbersome/annoying, so I decided to just simply lift out the board at an angle as it slides back and forth a bit, has some play in the wiring, which made it very easy to safely remove the microSD card without any worries or concerns of damaging/destroying it in the process.

[@MrPoguz]

How do you update it?

[@koolkleekai9387]

Very helpful . Just got my lsw zeno neo today and it went all rainbow when i fired it up lol much to the amusement of my son in law . Now i know where im at 😅

[@FrozenSith]

Most useful saber video I have seen. Liked and subscribed!

[@luismarin933]

I have LGT Sabers. My main complaint which could be factored by the hilt is the clarity of the audio. Really makes a different for voices or music. It can sound pretty muddled. I have Proffie and Asteria units which sound much better. This won't deter me from buying more since I buy them mostly for the artistry of the hilt itself. Feel free to tell me I'm wrong. Awesome video by the way.

[@viresabers5883]

Interesting! Are those installs running 24mm or 28mm speakers?

[@luismarin933]

@@viresabers5883 I believe its a 23mm 2-3 watt 8 ohm speaker.

[@cooach6614]

I got 109 sound fonts on my xenopixel saber all work fine the only thing is it doesn’t go from 1-109 after a while some are in random spots like font 70 wouldlnt go off till around I got till the 100s but all still work I’ll update when I keep adding more to test the limit

[@AbbyElric]

Is there a way to make tip drag work for the 32" now?

[@jimdb1980]

Hi sir I have a little problem with my luke Skywalker Sabre from artsabres, how can I reach you ? Thx jim

[@kiry2099]

Cool video question is it normal for button to be sensitive on xenopixel?

[@spinetanium3296]

Is it possible to remove the pre-installed fonts? If you can, how?

[@Deadgamers13]

Is there a bettery level indicater using the sabre in hand at all?

[@ralphbrewster3241]

I’d like to know too

[@Evilpass]

It'll tell you when it's low but other than that I doubt it has anything else.

[@morganrspringer]

I know this is late but I was wondering if there is a way to turn the clash function off. I’m planning to use for a duel and I don’t want to hurt people who are sensitive to flashing lights.

[@viresabers5883]

You can turn the clash sensitivity way up in the config!

[@cooach6614]

I added some new sound fonts and when I put my sd card I’m nothing happens I’ve down a fresh install 3 times now and it’s not working idk if my sd card port is fried or what looking for some tils

[@QWERTY-vh1bs]

Does it sound when you put the sd card and battery? Did you configure the config file? I fried my first board by doing the same thing

[@jamiewilliams4212]

Will these 1" neo blades hold up to mild moderate dueling?

[@plasid68]

What's daddy gotta do for some 1080p??

[@dislikecounter5191]

Is this proffie tier or just neopixel? Trying some of these and they don't work on my pixels and sometimes on an rgb. Or you have to enable them on a computer

[@migi123]

Do you know how many times i had to restart the video because i saw a person using a covertech wheel it looks even better than i thought

[@Tree_eerT]

Can i use Vire eletronics in crimson dawn sabers.

[@NewtypeSith]

Great video Tyler!!

[@Smilldon]

can we get an updated one of 2.0??!

[@viresabers5883]

Yeah, I'm planning to make something much better

[@KatrinaLeFaye]

Thank you for the video.

[@xXJ1GSAWX]

When I activated the music the lightsaber glitched out. It turned off by itself

[@RussianJediTT]

is there a way of using an Tri-Cree (in-Hilt) LED with this board?

[@SpaceWizardCosplay]

With a tri-cree adapter, yes you can. It sits on top of the pins and converts the neopixel signal to RGB. You will also need a midgrade polycarbonate blade and trim about 1/4 of an inch off the bottom of the diffusion film so that the tri-cree adapter can sit inside the polycarbonate blade. They're available at the pach store and ultimate works.

[@blackfangwolfknight]

Does it have Revan and Starkiller?

[@TheN3crons]

Wondering if you can help me out here. So i was messing with my xenopixel and by default. Every font has its on unique ignition. So say the dark saber ignition i change to warp ignition by holding the button down for 3 clicks. How do i get it to have the same slow ignition of that particular font when its now rotating through the default selection of ignition fonts like hunter, warp etc. I cant seem to reset it to its default settings.

[@Evilpass]

Maybe edit to config in the "set"

[@HighNoonTex]

• Pop the SD card into a computer • Find folder 3 (it's the Darkblade folder) • Delete a file called config in folder 3. Whatever you do, just don't delete the configuration file in the "Set" folder. Deleting folder 3's config file will reset it to its standard settings. If you want to add a slow ignition to other fonts, you can edit that in the configuration file in the Set folder. I made Dark Lord Revisited have an ignition speed of 1200 (milliseconds), giving it the same slow effect that the Darksaber has.

[@JN-hq7ih]

Can you explain that issue at the end again that requires a reformat of the SD card, I have an issue with my xeno pixel sound board which I believe is either a blown speaker or that problem u mentioned

[@viresabers5883]

Pm our fb page, and I'll help troubleshoot it tomorrow!

[@JN-hq7ih]

@@viresabers5883 Instagram okay to ?

[@Darth_Umbrus]

Is Xenopixel the same as Golden Harvest? Been looking at it and these seem awfully similar…

[@zero8802]

Question, I’m waiting on my first one in the mail now but what is the point of fonts? Like it seems like it just plays a bit of audio and changes the color but you can already change the color Soo? I’m confused if there is more to it or what

[@HighNoonTex]

As long as you don't mess around with them too much, it's a great way to keep your favourite characters sabers quickly at hand. So Kylo Ren's blade (#1) is a fiery red with a basic ignition and crackling sound. Compare that to Rey's (#2) which is a solid yellow with the scavenger ignition and basic sound.

[@HighNoonTex]

And sure, any font could be made to resemble any other characters saber, this is really just a comfortability thing

[@Duncker91]

Can Xenopixel boards have pre-on effects, like Reys? I know those blade effects thats already on, but besides those.

[@Linus_B]

I don’t know if this applies to ALL xenopixels but those I’ve heard of can have new sounds installed but not light effects

[@QWERTY-vh1bs]

Yes, you can edit the config file

[@Jezewl]

Been eyeing the xeno for a bit 👀 waiting for some expendable income.

[@SpaceWizardCosplay]

They aren't that expensive, and are half the price of a Neopixel or GH saber.

[@emuman09]

Damn wish I knew about the tip drag thing I wouldn't have got 32 inch

[@elvisbjones]

I got 36 not knowing this only the fact I like the proportion of the blade to hilt

[@maitrejoel1559]

an update to be able to change the effects of the lightsaber would be amazing

[@The_blind_Jedi]

Whos scary voice says “darkness “on that particular font?😏

[@viresabers5883]

Also me!🤣

[@The_blind_Jedi]

@@viresabers5883 i’m going to bring this up regularly, until you change your middle name to “darkness “.

[@wildpikachu7935]

Are there any normal sound fonts or saber ignition sounds? The effect at the beginning of each one is extremely annoying. Can you at least change them at all?

[@QWERTY-vh1bs]

You can change them on config file or by holding the button for 2-3seconds i think

[@moviespirit9067]

Are these the feature of all Xenopixels on the most recent firmware?

[@viresabers5883]

This is the first iteration. They've added more features since

[@moviespirit9067]

@@viresabers5883 Okay bc I ordered one from Darkwolf Sabers prior to finding you guys. Wanted to know if when it comes in I’ll be able to have gesture controls

[@viresabers5883]

@@moviespirit9067 should. Darkwolf is the OG. He will make sure you are taken care of

[@moviespirit9067]

@@viresabers5883 Okay great thank you! Will you guys be selling a Obi-Wan Xeno soon?

[@viresabers5883]

@@moviespirit9067 we have episode 1 xeno. Plan to get thin neck xeno in very soon!

[@mattp8287]

How do you charge this?

[@Evilpass]

Some you have to have a charger for the battery others have a standard circle charger and others have USB type-c

[@OEAgent01]

This is a really good guide. Thinking of picking up a KinderGuardian for my son. Will it survive a four year old?

[@viresabers5883]

It's survived my 4 year old so far!

[@MyStoner97]

neat. still debating on xeno or proffie.. hmmmmm. good job on the video though

[@thurisaz4life21012]

Im selling a luke one

[@blakesfavoriteandfunniestv544]

How much

[@JoelingtonMD]

@10:53 Can you please make a video on this? this is a great video otherwise thanks!

[@plasid68]

Ill take 100 please, and a piece of your beard.