XF Falcon Barra swap - EP 3. - Wilwood Brakes, Coil Over install

[@nathandonohue3164]

Option c on the wheels. I reckon the big snowflakes would definitely suit that car

[@2burning2turning]

Option c without a doubt. 19 in snowflakes will look mint.

[@brentonhawkins5604]

Option C on the wheels. Adds to the sleeper factor

[@poetschlifestyle4761]

Option "C" champion.

[@robertdelaney5994]

Option c and good work guys . I look forward to seeing it finishef

[@glensmith3459]

Option c

[@beardbuilds5140]

Option C !!! The big snow flakes will look awesome on this

[@MrNosajwhitey]

Option C or similar would suit it those kits are spoiled by the stub axle hanger being unpainted lol

[@b08m4rt1n]

Option C Snowflakes are the wheel for an EF Fairmont! 19inch Snowflakes!

[@darrylvanrooy]

Option C and while you're spending, splurge a new jumper for Matty.

[@SirDaffyD]

Option C on the wheels. Will help it look a bit of a sleeper. Can't wait until it's all finished.

[@nathanw7114]

The larger repro snowflakes would top this thing off! Great work, as usual!

[@Mwsgtr]

Option c. Loving the content thanks rod shop

[@richardflywills4155]

Option C is the only option. XF Ghia without them is wrong!! Keep up the good work guys 🤘

[@melbgrk6725]

option c snowflake wheels is best. keep it sleeper stock looking :)

[@tman476]

Loving the build guys! OPTION C for sure!

[@greatromondo]

Option C Snowflake Wheels. Love your vids guys.

[@mattdoyle9772]

Option C from me 👍💪

[@TheFarrell12]

Option C for sure. Awesome build guys 👍

[@adamsutherland751]

Option c all the way ive seen them before and look awesome

[@tr1370]

Option C on the wheels! Loving the content!

[@mickwebs]

Option C keep up the good work

[@gaetanosirna6574]

Option C - shouldn’t even be a question! Loving your work guys 👍

[@hatziracing1137]

Option C for me. Great work guys keep it up.👍👍👍

[@seanpereira6961]

My 19 year old self approves, my 39 year old self is starting to do financial calculations in my head. Loving this guys, super informative, like the way you've shown people how to plan out sequencing isn't too far different to what they teach you in a post grad engineering degree! I'm going to enjoy this moving forward!

[@mattmoore8545]

Option c Great videos you are putting out. And great to see and Aussie owned company doing what you are doing. Keep up the great work.

[@davidmerigan]

Option C on the Wheels 👍👍

[@andrewrigg4905]

Option B then C. Some nice products and what a great facility to work from.

[@bergie67]

Option C sounds good to me.

[@chrishiggins1811]

Option C is the best I think and keeping the snowflakes would like great, Cant wait to see more

[@koolkar55]

Option C. It will just be a nice sleeper.

[@ruebenskedgwell9627]

Option c dude awesome work excellent interesting content thanks

[@bigal878]

That is a very nice tubular front end and brake upgrade that you offer for the Falcon and that’s coming from a Holden fan here. Great job 👍🏻

[@welshjohn02]

Great stuff guys. Looking great so far. Definitely option C

[@campbellross8363]

Option c for sure!

[@mrdatsun211]

Option C for sure!

[@kyleorsak]

For sure option C. Wish we had these cars over here in the states. Love the channel guys. Great work

[@DCV65]

Option B on the wheels looked pretty good. Coming together well.

[@dtsisdead]

Option C - The snowflakes are sweet, especially in the bigger size.

[@martinellul1604]

Question on the Tubular front, does this setup also mimic the shelby drop where as the camber is kept more uniform on a lowered car and through suspension travel, looks like the top arm is dropped compared to factory?

[@ctbautorestoration5205]

19INCH SNOWFLAKES!!!!!!

[@robertshepherd995]

Option C. I never liked the snowflakes growing up but they’ve grown on me and would look tough as f^^k in a 19in option.

[@lukestocks4370]

Great video guys Love the detail. I need to build my XF

[@holdenongarage3306]

option c or keep looking maybe a weld or VMS racing wheel. really liking this style build keep them coming

[@peterrobins3708]

Adding value to an XF, Top work!

[@leightonB69]

Option c bigger snowflake wheel keep it the sleeper look

[@tylerburke2004]

Option C, without a doubt!

[@alexandermcnab4803]

C for sure

[@sloopjbnz]

Option C works best for me too

[@mitchboon1582]

Option c is the one. Will look awesome

[@claytonmccullough4881]

Big Snowflakes for sure. Loving the Build Guys

[@MAS__motorsports]

Great episode, and series :)

[@markbithrey3635]

Option c for sure make it more sleeper

[@TASMAN-1]

Have you guys overlooked the engine cross member ? XF's were only engineered to take a 6 cyl, so the crossmember was made from thin high tensile steel, ass opposed to thicker ones used in previous models. The Barra is really gonna stress that frame. The issue is cracking where the crossmember meets the base of the shock tower/engine mount. All XF's are prone to it, same as F100's. Info supplied to me by 2 RTA inspectors during a thorough inspection of my '85 XF. If you own an XF & the CM is cracked, drill out the end of the crack to stop it spreading then MIG weld the crack & weld another plate across the crack to bridge it. Either that or you're air chiseling the whole CM out to fit another. Clutch cable fitting in the firewall also need strengthening if you're going manual. Same with the pedal box clutch mounting pin. The factory sheet metal is weak as piss. "The joys of owning an XF for 10 years, I got to repair & replace most of it !!!"

[@cleric670]

Definitely option C on the wheels. Not very many cars can pull off the snowflake wheels anyways so it will be unique and still retain OEM flavor.

[@nojabjonny]

Deep dish aftermarket rims would look good for a street look, 10's on the arse and 8's on the front Although the stock Ghia rims for a sleeper look works too.. watch ya back mark, Jase did a pretty good job... :)

[@jarradbharvey]

Option c for sure

[@cliffharrington6500]

Option B on wheels looks good. Option C is too stock looking, ok if you want a sleeper look. Thanks for sharing video, those brake and suspension parts look awesome but Im picking they cost a pretty penny.

[@chopper1168]

The last set looks good

[@bernzie001]

Option B looks slick

[@winnieHannaway]

Are you able to get the vehicle engineered with an un-captive spring? Or do you use a keeper spring?

[@shaneselena3182]

Option c. Keep it a sleeper.

[@charleslark8508]

Option C, no doubt.

[@jimclarke1108]

Excellent front end kit. Option B

[@eddieshlips2871]

The Simmons are Ok. Much better than the second option. I think the larger snowflake wheels would be great. But its your car, do what makes you happy.

[@allyboy8]

Interesting content guys.

[@maxbomb101]

Option C all the way

[@ianmcmillan7623]

Snow flake a good looking wheel for that factory look Mint

[@yeahboiwahoo]

option C for sure

[@paulthompson1654]

Adding some lubeto the poly bushings especially the male/female castor bushing . The attachment of the caster bar to the lower wishbone is a concern 1x bolt instead of 2x bolt . Camber bolt upgrade was late XE and all XF

[@wileecoyote1362]

Option C is the go

[@kinarrakid5036]

Great vid. Option C for me.

[@sipposbft]

great video guys... any chance of you doing a clip of your "weld in" front end clip for the same series falcons... trying to convince my cousin to go that way on his XM

[@Magpies_corey]

Option c 💯

[@rodneyhutton4502]

Got option C but they are expensive.

[@fo82rd12]

Option B on the wheels. And if you dont run them i'd be keen to buy them for my XE. If you do go the 18 inch snowflakes then get them in 9.5s all around 👍

[@markweir-smith9341]

Wheel option c : tin god solutions custom pursuit rims in 18” with correct off set... powder coated factory silver...

[@cracka-tinnitribe9543]

Option C for sure

[@sheel2]

Option C!!

[@Dropbear237]

Do the XF stub axles fit on a ED Falcon? I'd like to do that brake kit to my NC Fairlane.

[@runningonempty2562]

18” snowflakes look spot on

[@furai-ingfalc-kuru8149]

Do you think this brake kit would work with the Falcon Eseries? Namely EA-D but the EF/EL guys need an upgrade option too. Fuck all out there aside from the EL GT stuff which are basically unobtainable. While to fit 18in wheels is a bit large, i'd need something to fit under a 15in are there options for them? Wilwood was always gonna be my go-to for it, but I've just never seen anyone really put something basically bolt on for them (Racebrakes Syd did about 15 years ago afaik) Option C on the wheels too! :) Maybe Option A for burnouts, save your guard paint a bit with that shoddy offset hehe

[@michaelbyrnes7944]

What front end kits and big brake options do you offer for XH EL falcons

[@boblogIIIfan]

The brakes are engineered . But your not allowed to go bigger than a 17inch wheel on a xb / xf ? (2inches bigger than standard) ? How do you get around that

[@michaelchandley1066]

are there only two lock nuts on the coilovers most products use 3 lock system.

[@andrewnelson1496]

Option C. Love this channel

[@terrysowter4798]

I'd go opposition B, but are larger wheels going to screw up your Speedo.

[@vanjazecevic1159]

Option C will be mint!

[@rlscustoms]

Loving this content, would be cool to see a build on a car that goes around a corner as well, even a Falcon like this 🤔

[@mtxmotors2263]

Would be cool to see one of these here in HK actually, show all them SMD boys in their SuperCars how its done lol

[@rlscustoms]

Now ya talking lol

[@blakebrewtnall1152]

Definitely option c snow flakes 👍

[@xozindustries7451]

Option B looks good to me. Or a set of BBS mesh wheels would look good

[@cleric670]

Did you use blue loctite as your torque verification paint? I LIKE IT!

[@Atari2600Rules]

What about a 4th opyion in BCI wheels? they make an 18 inch ford stock steel rim?

[@A_lesson_in_Hate]

You guy's should put barra in the title ,you would probably get a lot more views hear and overseas it's good content

[@A_lesson_in_Hate]

You changed it... I am the greatest influencer of all time haha..

[@lukehili7533]

Love this thing guys great build

[@dashfarmer2654]

Option A looks phat.

[@xozindustries7451]

Why don't you use heim joints on the front caster bars?

[@clinty51]

Considering the overall exterior look, go the bigger 'SnowFlake"

[@drainage8935]

Option c mate 100 percent

[@jimlux00]

The big diameter snowflakes will look killer

[@scousered100]

I owned an XF fairmont.... it has to to be the Originals for me!