Xiaomi m365 pro rear 10 inch tire upgrade

[@pavhinamalina7318]

This video is the most useful of all I have ever seen! Thank you very much to the author! I did not know that you need to put two spacers at once, but I put only one! My mistakes, unfortunately, I have already committed. This is the best video cause it is shown how to install all of the parts correctly (especially spacers)

[@MrAbcdefgh1989]

Thank younfor your kind word!

[@yaya33130]

thank you for this tips from france

[@mikoajkorba4589]

From the perspective of a year, do you think that this particular tire model works well? Would you recommend it?

[@MrAbcdefgh1989]

well, I had 1 nail enter my tire since the upgrade, and I must say it took me A LOT less time to get it off and fix it (bigger tire, easier to handle). Other than that, I still like and am glad of the upgrade!

[@mattwanoa3919]

Hi can you put 10inch tires on standard m365?

[@MrAbcdefgh1989]

yes, same thing!

[@Youssef-rc6dx]

Hi really need your help when you got the stand out and after in u got like a extra layer on it where can i buy that and what is the name

[@MrAbcdefgh1989]

it comes in the package of tire upgrades. I have no clue how you would find it separate

[@ashrafhelu4664]

Well done.. Found your video useful. My question... To upgrade from 8.5 to 10" worth the job you did?

[@carlwake5614]

it's definitely worth the upgrade, especially if you buy a kit with the rear light extension cable included.

[@Motorizedstuff]

Dose the scooter reach top speed still as it will now go faster with larger tyres

[@MrAbcdefgh1989]

ofcourse it does!

[@Motorizedstuff]

Have you installed the front tyre too or just the back 1

[@MrAbcdefgh1989]

@@Motorizedstuff both tires - you can find videos of them both on my channel. enjoy!

[@dawoodkhan6067]

Have you seen the 10inch rear mudguard for M365 10inch tyres?

[@MrAbcdefgh1989]

no. is there one? I would be curious how it looks/what it costs, though I would not buy one, as the risers work fine

[@dawoodkhan6067]

@@MrAbcdefgh1989 there is one on aliexpress but I'm not sure if it's only big enough for wheel clearance or if you could also route the stock wire through the stock hole.

[@dawoodkhan6067]

Can you use inner tube from 8.5" tyre for 10"?

[@MrAbcdefgh1989]

in theory yes, but it would require to stretch far more to fill the extra 1.5" of space, so it might burst, or be weaker overall. I recommend you get a proper inner tube as well :)

[@dawoodkhan6067]

@@MrAbcdefgh1989 okay. Thanks.

[@Stewer1000]

Hi can yoou heLp me. When i remove the sticker there is like a plexiglass cover right underneath the sticker so i can t get to the screws thanks you

[@MrAbcdefgh1989]

that is part of the sticker, but got separated. remove that as well :)

[@aphilzitrone]

How did you solve the problem with the bell-holder? Cause in my case it doesnt hold it anymore :/

[@MrAbcdefgh1989]

please explain what bell-holder :)

[@aphilzitrone]

@@MrAbcdefgh1989 The bell works also as hook for the scooter to take it with hand. THat bell. But i just need to get some height probably i will use some disks for that

[@MrAbcdefgh1989]

@@aphilzitrone it did not change/affect in my case

[@ZeNex74]

another video i saw he just pulled teh cable slightly u pand glue in place and it reached to reconnect in its little plug with no issues, less hassle. not viable?

[@MrAbcdefgh1989]

it might be, if you say the cable is long enough, but my final solution was to avoid the bigger tire reaching the cable and the connector altogether, so I still think getting the cable on the mudguard support is a safer alternative

[@MrRennie1986]

I am having problems with 10x2 kenda tires not sitting right on the rims

[@MrAbcdefgh1989]

not sure what/how kenda tires are, but I too had issues with some 10" tires not sitting properly (they were a bit smaller) on the rim, and as such, I could not complete the upgrade. I suggest you try a 10" tire from another supplier, but make sure it is for a m365! Good luck!

[@kevindarkstar]

Lot of work to be honest, question is is it worth it for the return

[@MrAbcdefgh1989]

that is for everybody to decide for themselves. I would NOT got back to 8.5" tires, and I personally recommend the upgrade

[@aphilzitrone]

My 1S has a metal screw fit where the connector for the brakes sits. So i have to cut that shit off to use the wheels. Its so annyoing :D

[@MrAbcdefgh1989]

1S?

[@aphilzitrone]

@@MrAbcdefgh1989 German Street licensed Xiaomi 365

[@MrAbcdefgh1989]

@@aphilzitrone so it is not the same, 1:1? I did not have any metal screw

[@aphilzitrone]

@@MrAbcdefgh1989 Sadly there is this difference. And i bought a machine to cut it off. Hope its enough for the scooter then. Felt a bit dissapointed because everything else worked after some struggle.

[@MrAbcdefgh1989]

@@aphilzitrone well, glad it helped :)

[@motoirek5908]

👍

[@vaiosdiminikos4628]

my scooter 3 became significantly slower with 10 inch tyres.

[@HardDiscount]

eu nu cred ca ma descurc,

[@MrAbcdefgh1989]

incearca si te vei descurca :)