Xiaomi Pro 1 Vs Pro 2 Electric Scooter Speed Controller tear down PART 3

[@antiLeixo]

where is the video about the m365 pro battery?

[@asencyel]

Whats the max temperature and equivalent amps running through the controller board ?

[@amirouw]

can we use aftermarket lcds for the xiaomi pro 1 with proper wiring will it work?

[@yougregor]

Hey, do you know what battery cells are used in the Pro 2 battery? If I remember correctly, Pro 1 had blue EVE cells, so these look different on the first sight.

[@axelollars]

LG MH1 18650

[@les1669]

Could you put the pro 2 board in a pro.

[@ward2471]

yeah that would be interesting ! if they are interchangeable ! ?

[@ward2471]

mint video !! can't wait for the tyre replacement video !!!

[@Maykay1312]

Daniel Ward pro 2 has thicker tires iner tubes and outer tire definitly recomend to buy pro 2 tires if u have a pro or older models i ran over glass multiple times have done over 1000km no punctures

[@GR3G1987]

I'd like to add a gyroscopic alarm, that i could enable with a remote. So if someone moves it, it rings and stop once it's stable. Any idea if that exists and if yes, If I could connect it to the battery ?

[@l3w154]

use some kind of mercury swtich?

[@chefabrils5519]

How to make more speed the scooter from Controller

[@MarcelTore1]

Your rear tire is in wrong direction at 5:10

[@futmut1000]

Is it possible to flash original Pro firmware on the Pro2? Ive noticed that Pro2 wont fully charge, it stop at 11900mah meanwhile my old Pro was charging at full 12800mah, im asking if i flash the Pro BMS i can get full charge on the Pro2??

[@Hydropanic1]

If you use one of the older BMS firmware versions, then it will be able to get your m365pro2 to 12800mAh.

[@futmut1000]

@@Hydropanic1 I tried to flash ble so i can flash BMS from the original PRO but i bricked my scooter...SO i had to buy an stlinkv2 to get my scooter back...Still waiting for someone to figure this out

[@martonhegedus2684]

@@futmut1000 Hi, I bricked too.. :( But only need to buy a Bluetooth module, a out $15 on Ali... I bought alsó an stlink, but still nőt arrived.. Write me, if U succesfully stlink the ble module.. M.

[@seanbennett9803]

Yes you can ive done it to my pro 2 as I notice it didn't fully charge now it does.

[@taysikuu1748]

PRO 2 has better quality

[@minalobudeshte]

i can't overvolt my pro2 with 12s although i flashed custom firmware. Its giving error 21 or 24. Any ideas how I can overcome this problem? thanks

[@sandy1234853]

when upgrading the battery you will still need a bms that can talk to the controller board in your scooter without it your scooter will refuse to work < that will fix error 21 for error 24 you will need to install custom firmware on your scooter there are plenty of videos on youtube showing you how to do that as long as your scooter is on a patchable firmware if its not well that's even harder again to fix and requires extra tools and skills

[@sneakzzi]

Where can I get a new Scooter Pro 2 controller

[@kooltoyz2837]

You cannot buy any parts for a pro 2 yet (10/02/21) We have been informed parts will be available in spring 2021