Link Channel Membership Subscription: kzbin.info/door/JQZlZVwbWQNvgCXK3gCPrAjoin Link Secret Aim Assist Video: kzbin.info/www/bejne/eoHVi4KDrNSCrdE
@TeamRUSHfps3 жыл бұрын
hello Xim I play on Xbox series x tv 60 Hz (what Hz cup do I have to put in the Xim app and what Hz trace on my bloody A4 tech mouse that has memory ?? and the synchronization help me please
@XIMCentral3 жыл бұрын
@@TeamRUSHfps For the best polling rate (Hz) follow my "Best XIM Polling Rate" video. It heavily depends on your mouse and not the XIM. The video will show you how to measure the best polling rate for your setup. The synchronization is then up to you and it mainly depends on if you want more aim assist or a closer PC experience.
@TeamRUSHfps3 жыл бұрын
@@XIMCentral if I saw the complete video now I understand more the synchronization but my mouse and. The Xim app does not know what Hz to place, my mouse uses 3200 dpi and allows a Hz of 1000, 500 250 etc. I do not know if to place it at the same time hz you help me I do not know what it responds to use and if to put it it responds to the mouse rate and. xim
@XIMCentral3 жыл бұрын
@@TeamRUSHfps Hey, for that do a polling rate benchmark with your mouse to find out which polling rate is the best for your mouse and the XIM :).
@Alex.UA63 жыл бұрын
So from what I understand on rainbow six siege it’s running on 60 fps so I would want to run synchronization on common but what would I set my polling rate to?
@Bak7ii3 жыл бұрын
The artificial voice is 100% good 👍🏻
@ksa8533 жыл бұрын
بسام اذا فهمت عليه ارسلي رقمك واتس اب بضيفك تفهمني
@wafflefister63683 жыл бұрын
love the new voice! really clean
@xireaperix89103 жыл бұрын
Super Video 👌✌️…das Beispiel zum Video finde ich super gewählt…
@mathialba3 жыл бұрын
Lovely video, I’m on 250Hz Sync OFF using the MJFAME config, i was struggling a bit in the beginning bcs I switched from 1000Hz too 250Hz and I lowered my sensitivity for more aim assist and this works perfect for me i feel that the aim assist is more stronger.
@lilrash873 жыл бұрын
What game you playing
@mathialba3 жыл бұрын
Warzone
@rafalonso133 жыл бұрын
You kept your mouse at 1000 hz or you also lower it to 250?
@mathialba3 жыл бұрын
@@rafalonso13 yes i keep it at 1000hz, you don’t have to lower it.
@conner4903 жыл бұрын
I love these quick informative videos, thank you! So if I understand correctly, I would get the best aim assist quality/response by setting the xim polling rate to 125hz, and off sync for my hip/ads if I'm playing a game (cod/bf) that runs at 120fps? I've since switched to 250hz and off sync based on the info in the last video and it feels great, so if I understood right I'm excited to give this setup a try!
@mathialba3 жыл бұрын
I did the same and it works perfect with 120FPS on the ps5 in warzone.
@conner4903 жыл бұрын
@@mathialba sweet thanks for the input, can't wait to try it out!
@XIMCentral3 жыл бұрын
Yes exactly! If it feels too sluggish though then try 250hz instead as it makes the mouse movements noticeably more responsive :).
@conner4903 жыл бұрын
@@XIMCentral awesome, thanks for the response! It's always fun learning something new with the xim.
@lordlouis99313 жыл бұрын
@@conner490 you gonna try sync off at 125?
@Tabs06663 жыл бұрын
when the artificial voice sounds more real than the real voice
@cheukinator3 жыл бұрын
Finally someone confirms that 125hz and off is xim 4 settings. Antithesis kept telling me it's 250hz and default.
@XIMCentral3 жыл бұрын
And to me he said its 500hz and slow! ;) ;) :P
@Sohikun3 жыл бұрын
@@XIMCentral i guess he is trolling every one xD
@NYTV_YT3 жыл бұрын
Finally this is explained. Now can work on settings with more understanding of what you are actually doing, instead of trial and error method. So are you saying that if we set Sync Default (Example) - no point to have XIM refresh rate in global settings above 125Hz?
@XIMCentral3 жыл бұрын
I would still recommend to stay with 500/1000hz for sync default, common or slow. Imagine a very short desync between the console and XIM, this would cause your input package to not be accepted by the console at the current but at the next possible time which with 125hz is 8 milliseconds later. With higher polling rates this wont matter since the next package is accepted much sooner.
@Alt4i_3 жыл бұрын
Danke erstmal fur dein geiles Video u d die Erklärung. Ich spiele zurzeit auf der Series X auf einem 2K Monitor 27Zoll auf nativ 120FPS. Ich habe dein letztes Setup ausprobiert und das geht sogar besser als das MJ Konfig fur aim assist! Das Ding ist das du natürlich nicht alle setups darstellen und ausprobieren kannst für uns, leider. Aber wenn man dein Kanal studiert hat dann kann man schon sehr viel einstellen auf der XIM Apex. Danke dir nochmal fur deine tolle Arbeit ! Ach ja DPI spielt auch ne große Rolle beim AA und natürlich die anderen Einstellungen wie Boost usw.
@c.s44283 жыл бұрын
Nice Video🔥 Thank You XIM❤️
@Sohikun3 жыл бұрын
Hello od1n Which synchronisation mode offers the best accuracy with a mouse??? Does polling rate effect my mouse accuracy?? And what factors|settings can offer me the best mouse accuracy?? Ps5 120hz destiny 2
@XIMCentral3 жыл бұрын
Hey, the best overall accuracy is probably provided by sync default. Yes the polling rate can affect your accuracy, in a negative way. If your mouse cannot consistently poll at the rate your XIM is set to then this can cause mouse stutter, which reduces your acciracy. The best mouse accuracy can be achieved by using the correct sensitivity, thats the most important aspect. A large share of players use sensitivities that dont match their dexterity level. Thats the main difference between PC Pros and normal gamers, the pros are using sensitivities that perfectly match their dexterity. My "ultimate mouse sensitivity" video shows a method on how to find your own most optimal sensitivity if you are interested in that.
@user-jdr93q8yer9g10 ай бұрын
nice jab at Tesla 😁
@ericruddphotography2 жыл бұрын
So am I correct in understanding….if I’m using an XBoxOne for R6, I should be using “common” sync instead of “default?” I believe the frame rate is 60fps for this game. I currently have my Corsair (3200dpi) mouse and Apex device set to 500Hz polling. I created a new config today after doing a full Apex games download. I’m using a standard 780p 60 Hz TV as my monitor. The setting feels fairly smooth. I’m pretty sure I got all these settings from a recent video of yours. After following the instructions in the mouse sensitivity video, I landed on a HIP sensitivity of 34. That seems about right.
@ericruddphotography2 жыл бұрын
I think the concept here is….Siege on XBoxOne will run at 60fps, one way or another. At some point in the chain, the data input will need to be whittled down to this. It sounds like if I leave the XIM on default, I’m leaving this scaling down to the XBox. If I set the XIM to common, the XIM is doing it. Kind of like audio. You can record and process audio at 24bit/96k all you want, but eventually it will need to be output at 16bit/44.1 for CD.
@XIMCentral2 жыл бұрын
Hey, if you wish to sync your inputs to the framerate of your monitor then yes, you can use sync common. Most Ximmers use sync default though as this gets them closer to the amount of packets that the console expects to receive. To perfectly match what the console is asking for you can go sync off and 250hz on the XIM. Then your XIM runs on the same polling rate and inputs per second as the console controller.
@ericruddphotography2 жыл бұрын
@@XIMCentral would I then drop my mouse to 250Hz as well?
@XIMCentral2 жыл бұрын
@@ericruddphotography You can do that but its not necessary. As long as your mouse polls on the same frequency or a higher one you are fine.
@ericruddphotography2 жыл бұрын
@@XIMCentral thank you.
@SwiftCookie3 жыл бұрын
I've been using my Apex on PC and it's worked rather well so far even though it's only made for console. Would you recommend I use Sync OFF and 1000Hz for PC considering PC can utilise the full 1000Hz?
@XIMCentral3 жыл бұрын
If the PC game was made for inputs being accepted at such a high rate then yes, you can absolutly go for it. If your mouse movements turn out to be stuttery or skip then reduce the polling rate or add some smoothing.
@Dulcet77873 жыл бұрын
Does the polling rate have any affect on default sync? For example, would 1000hz + default and 125hz + default have the same feeling ?
@XIMCentral3 жыл бұрын
I would suggest to use a higher polling rate with sync default, common or slow as a minor desync can then otherwise result in your packets being send on the next cycle. When playing sync default 125hz that would mean your packages can get delayed by 8 milliseconds while with 1000hz it would only be 1 millisecond.
@Dulcet77873 жыл бұрын
@@XIMCentral Thanks for the advice and the reply! :)
@j05hh863 жыл бұрын
thank you!
@momosanchez50253 жыл бұрын
Nice vidéo as always my guy 👍, i play bf4/PS4 most of the time. Sync default, 500hz. What do you say, wrong or right ?
@XIMCentral3 жыл бұрын
There honestly is no right or wrong as there are so many things to consider, delay, aim assist, mouse movement quality, ... there isnt one best settings but your settings sound really really good ;).
@momosanchez50253 жыл бұрын
@@XIMCentral allright nice to hear. Keep the good work and wish you all the best guys.
@aerox0913 жыл бұрын
Bro was würdest du sagen ist am besten für rainbow 6 siege von den Profilen ? Gruss aus Köln
@XIMCentral3 жыл бұрын
Sync Default und Gängig spielen sich imo am besten :).
@Crankelo3 жыл бұрын
Hallo hab jetzt eine ps5 und ich weiß ich bräuchte ein speziellen Controller für mnk und ich wollte fragen ob es sich lohnt noch so ein zukaufen oder schon eine Lösung habt und sie bald rausbringt das ich mit den ps5 Controller das auch machen kann
@XIMCentral3 жыл бұрын
Hey, bevor die ersten offiziellen lizensierten PS5 third party Controller auf den Markt kommen wird es wohl keine DualSense Lösung geben. Und da bisher kein einziger Hersteller so einen Controller angekündigt hat wird es wohl noch mehrere Monate dauern. Zudem wird die Speciality Controller Lösung ja auch weiterhin möglich sein selbst wenn der DualSense Controller irgendwann kompatibel ist.
@Crankelo3 жыл бұрын
@@XIMCentral ok, vielen dank dann weiß ich Bescheid,dir noch ein schönen Tag ,und mach weiter so.
@arrak50003 жыл бұрын
Great guide bro 🙌🏽 do you know whether or not a chivalry 2 config is in the works?
@XIMCentral3 жыл бұрын
Yes its on the to-do list :) community.xim.tech/index.php?topic=30363.0
@nanexxvii3 жыл бұрын
My experience is the next, i was playing 250hz off sync on warzone with 60 fps and works very very good, but when i changed to 120 fps, cause last week with the warzone update they add the option to 120 fps so i change id, so i played with 250hz sync off on 120 fps but i feel like doesnt work right, like before so i changed back to 60 fps… but few days ago i tried again 120 fps but i changed 250hz to 1000hz sync always off, and yes works miles better than 250 hz… lot better but repeat when you play on 120 fps! I will be waitting for your recommendations on your test it on your new 120 fps monitor, but until that i will still playing on 1000hz and 120 fps.
@XIMCentral3 жыл бұрын
Hey, this sounds like you prefer very responsive mouse movements. Going sync off 250hz on 60fps games is somewhat similar to sync off 1000hz for 120fps games. In both cases you use a sync/refresh rate higher than the framerate of the game which usually result in very responsive and PC like mouse movements. One of my next projects will be a "best xim settings for 120fps games" video, I already got the monitor but i need to do some testings to find out what works best first! :)
@nanexxvii3 жыл бұрын
@@XIMCentral yes, i am a wrist player, maybe for this reason, i dont know. But really idk, the best time playing with the xim apex was on the same settings and in 1000hz and off sync on 60fps, but idk what happened since few months ago cause doesnt work so well anymore And something change, dont know why but before the apex works literally strong very good response, aim, shoot, like aimbot 😂😂 …. Ok i will be waiting for your next video!! Keep doing, great job! You are top!
@XIMCentral3 жыл бұрын
@@nanexxvii It could have been that the game received an aiming mechanic update. In that regard go into the global settings of your XIM Manager and press force library download. After that create a brand new config with the very same settings and check if that plays as well as previously :).
@nanexxvii3 жыл бұрын
@@XIMCentral maybe you are right, because i force downloading but, but, i dont create a new setting i mean i create a new one but i paste the code settings of the before config, and maybe is that, maybe if i create a new config manually without the copy and paste it will work great… tomorrow i will delete all and reset to factory and make a new config manually maybe is that! Thks for the idea man youre awesome. And a last questio , idk why every time than they updste the game i have to change the xim sensibility i have to reduce it because he move so fast, i notice that from 4,5 months ago and idk why, like i said any update the sensibility is higher and i dont touch anithyng … idk it is weird, what could be the reason? Maybe the same, maybe is my config that need to do as you said. And sorry for my bad english..😓 thanks for all
@XIMCentral3 жыл бұрын
@@nanexxvii Hey, the sensitivity changes are due to the game developers changing the ingame aim mechanic. The XIM has no influence over such a change and can only follow those changes by updating the ST/config translator via an ingame donwload (and then new config creation).
@hussein97143 жыл бұрын
I love so much xim apex 😍
@Mr-Not-Applicable3 жыл бұрын
Great video as always.Which synchronisation method would you recommend for PUBG on PS4?
@XIMCentral3 жыл бұрын
Hey, i recently made a new PUBG video and i would recommend the synchronization used in that tutorial. I dont memorize the value anymore though, but after lots of testings that one worked out the best. Its explained in the video.
@Mr-Not-Applicable3 жыл бұрын
@@XIMCentral link to video please as I do not see PUBG in Playlist
My man loves Siege lmao. Always Siege playing in the back.
@XIMCentral3 жыл бұрын
Haha still got a lot to learn in that game but i start to get better ;).
@Dkryptd3 жыл бұрын
@@XIMCentral How many estimated push/pulls can the included hub handle during its lifetime?
@supreme91873 жыл бұрын
@@Dkryptd my usb of my apex has come out a couple times but has good life had mine for about 3-4 years now
@manavsharma51223 жыл бұрын
Thanks for the video. But can you still clear up which is the better and more preferable Sync choice for Rainbow Six PS4. Since we get just 60 FPS and what will be the better option for PS5 Siege as it gets around 120 FPS?
@XIMCentral3 жыл бұрын
Hey, the current ST for RB6 is outdated and a new one is currently being made, until then its quite difficult to say which sync performs the best.
@SuperError183 жыл бұрын
Great video man! The best sync and hz for Warzone for you?
@XIMCentral3 жыл бұрын
Hey, that depends on if you want more aim assist or a closer PC mouse experience. Based on that pick a sync that suits this the most. The majority of Ximmers will prefer something in between which can be achieved by 1000hz/500hz and sync default for example.
@SuperError183 жыл бұрын
@@XIMCentral i'm from PS4 pro, and i prefer a closer PC mouse experience and minimum input lag possible, now i use a MJFame config with 250hz It Is not bad
@XIMCentral3 жыл бұрын
@@SuperError18 Hey, in that case i would recommend you to not use MJFame as that an aim assist booster config which trades mouse accuracy in favour of more aim assist (so less PC like). For a close PC experience i would recommend my Warzone config video with its settings plus the best parachute trick video to handle the parachute gliding.
@epemas3 жыл бұрын
so the sweet spot is 250Hz for consoles, but what about PC? i use xim apex on PC as controller input. lets say i play call of duty, does PC version also made as console version of the game so best result is with 250Hz? or PC version will be best with 1000Hz. i have 70-90 fps in the game on 144hz monitor
@XIMCentral3 жыл бұрын
Hey, thats something im actually not sure about. I would say try 125hz, 250hz and 500hz to see which one gives the best result on PC. It might even differ from game to game.
@Jcola3 жыл бұрын
@True what settings or curve you running?
@xvprogroxv76583 жыл бұрын
Hello, I am on the lookout for your videos, I have my Halo 5 with 250Hz and synchronization off to what you said in your previous video, do you think that configuration is fine or should I modify the polling cup, I await your answer friend.
@XIMCentral3 жыл бұрын
Hey, those settings are a great pick for Halo 5, no need to change anything if you enjoy the gaming experience with those! :)
@xvprogroxv76583 жыл бұрын
@@XIMCentral Thanks for answering, if it feels good friend, I'll stick with that configuration. excellent videos thanks to your previous video improve the shots a lot
@thekillprograme8133 жыл бұрын
Finde deine normale Stimme angenehmer 😎 Wobei, wenn du die bearbeitete Stimme beibehälst, würd ich die 5 - 10 % langsamer machen. Klingt, als ob du das schnell runterleiern willst. Vllt liegt's auch nur am Englischen 😅😂 Bekommst du eig. regelmäßig auch Nachrichten, weil du mnk benutzt oder hast du das ausgestellt?
@XIMCentral3 жыл бұрын
Haha danke, ja ich glaub die hab ich echt zu schnell eingestellt. Nachrichten habe ich auf "nur Freunde" da das irgendwann einfach nur noch langweilt^^.
@thekillprograme8133 жыл бұрын
@@XIMCentral alles klar 😎👍 Ach, okay. Ja, irgendwann ist's wohl auch nicht mehr lustig. Naja 😅😂
@XIMCentral3 жыл бұрын
@@thekillprograme813 Haha viele sind schon unterhaltsam aber ab und zu gehts halt echt unter die Gürtellinie^^. Und da ich das Zeug ohnehin schon über KZbin Kommentare bekomme hab ichs zumindest auf der Konsole abgestellt xD.
@thekillprograme8133 жыл бұрын
Löscht du zufällig auch Kommentare? 😄 Hier gestern noch was gefragt und Kommi ist weg 🤔 Oder ich hatte den nicht abgesendet 🤣
@XIMCentral3 жыл бұрын
@@thekillprograme813 Gelöscht werden nur Beleidigungen und die meistens von KZbin selbst, da muss ich selber i.d.R. nichts machen. Von dir habe ich jedenfalls keinen Kommentar gelöscht :(. Was war denn die Frage?
@farfellini3 жыл бұрын
just curious what are beam1mpact's rainbow 6 xim app settings and in-game settings?
@XIMCentral3 жыл бұрын
Hey, he is using 1:1 the ones from the "Competitive RB6 Config" video that i uploaded not so long ago :).
@BlackWolf-of5ce3 жыл бұрын
Rogue company I use common sync everything else I use default but I’m gonna try different syncs now
@XIMCentral3 жыл бұрын
Let me know how it goes! :)
@jamesohagan25293 жыл бұрын
Hey man great video,I'm playing destiny 2 on series at 120 Hz what polling rate and settings would you recommend for more responsiveness and aim assist,thanks
@XIMCentral3 жыл бұрын
Id say try 250hz or 500hz off first, and then 500/1000hz default. One of the two should play best :).
@jamesohagan25293 жыл бұрын
@@XIMCentral thanks man,I've tried out the AJ frame confiq with the 250 Hz trick it's very good but I would like it a bit quicker does the dpi have to be 800 for it to be the most effective are could I put it up abit
@XIMCentral3 жыл бұрын
@@jamesohagan2529 You can also increase the DPI value, thats fine! :)
@3la2Saber3 жыл бұрын
Thank you and any recent update on the new xim device
@XIMCentral3 жыл бұрын
No update yet other than July unveil (probably).
@cpratt25443 жыл бұрын
@@XIMCentral hey my controller will not show up on the app even tho it’s connected the mouse and keyboard do but the controller does not ? Do you have a fix ?
@cpratt25443 жыл бұрын
@@XIMCentral I’m useing an Xbox one x not the series x the one x and it’s a controller that did not come with the Xbox on I bought separately
@XIMCentral3 жыл бұрын
@@cpratt2544 Hey, it might be a slim/one x controller or one of the new series x/s controllers. Either way update your XIM Firmware to the latest beta firmware, if that doesnt solve it then it could be the cable between the XIM and the controller.
@KhaoticKontrol3 жыл бұрын
So if i play a game on the xbox series X at 60 Fps and i use the xim that is then plugged into another device capable of running at any polling rate the xim can run at and has the ability to select an input polling rate and output polling rate. What should these be set at to make them run effectively? Should my polling rates match on both devices?
@XIMCentral3 жыл бұрын
Yes i would say have both of them running on the same polling rate.
@KhaoticKontrol3 жыл бұрын
@@XIMCentral would it make more sense to have mouse and Key/ xim to 1000hz then the input of the second device to 1000hz but output to 250hz? That way it is getting the information to the second device as fast as possible but only sending information to the xbox at its acceptable polling rate?
@bobricard18563 жыл бұрын
Merci !
@jcampezhi26833 жыл бұрын
hello im back again :) for ps5 overwatch at 60 fps on off sync, 250 hz is better if I understand right? or 125 hz? also should I match polling rates on both devices? (g pro wireless)
@XIMCentral3 жыл бұрын
Hey, as long as the mouse polls the same or faster than the XIM you are fine. As for the other question, you have to test those settings for a few games to find out which one is the best. They will primarily influence the aim assist and thats a personal preference thing, so its therefore not really possible to say which one (objectively) is the best.
@edmondgamer3722 жыл бұрын
For me slower is better I can understand better
@brokenjonah41053 жыл бұрын
I use xim on PC playing fortnite at 240fps - what sync and mouse polling rate do you recommend? If I understand you properly I should be using off sync and 250hz polling ? What mouse dpi?
@XIMCentral3 жыл бұрын
Yes thats what i would recommend. DPI is independent from this and will more or less influence how much aim assist you will have. Higher values result in less aim assist and lower values in more aim assist. You shouldnt go lower than around 1600 dpi though.
@KrypticModz3 жыл бұрын
I have a problem bro plz help me when I crouch spam on rainbow six siege with space it crouches when I don’t shoot but when I try shooting and crouch spamming with space at the same time it doesn’t crouch for me what could be the issue? I tried other keys still same result
@XIMCentral3 жыл бұрын
Hey, this sounds like a binding issue in the sub config that is active when you shoot. Check your sub configs, im sure theres something wrong with the button bindings :).
@KrypticModz3 жыл бұрын
@@XIMCentral oh wow I just found out my space was a different key for the other sub configd Thanks so much bro ur the best that’s why I been losing so many gunfights lol thank u so much ur the best man
@afclapz55153 жыл бұрын
can u do competitive settings for warzone
@XIMCentral3 жыл бұрын
Ill do Apex Legends next, after that i could check out Warzone again!
@dariogalac84623 жыл бұрын
@@XIMCentral any update on this? :)
@XIMCentral3 жыл бұрын
@@dariogalac8462 The Apex Legends video came out 2 weeks ago i think.
@dariogalac84623 жыл бұрын
@@XIMCentral i was thinking about the warzone competitive settings :) Edit: nvm saw the comment on other video ;),btw looking into the new xim device ;)
@xakula11873 жыл бұрын
Moin, mal eine Frage, wenn man nicht die neueste Firmware auf dem xim apex installiert hat dann funktioniert das in game auch nicht, richtig? Also bräuchte ich für die normale ps4 die 2020er firmware korrekt?
@XIMCentral3 жыл бұрын
Alle Firmware Versionen sind Rückwärtskompatibel ohne Einschränkungen oder Nachteile, du kannst also ohne Probleme die 2021er Firmware benutzen.
@myles63883 жыл бұрын
What response rate with OFF sync would be best for Xbox one S for apex legends? I thought it ran at 60fps; and in your recent video you use 250hz. Sorry I’m confused 😕
@XIMCentral3 жыл бұрын
Yes that would be a very good choice for both, maintaining responsive mouse movements while also keeping a lot of aim assist!
@battle-peachl88813 жыл бұрын
Anybody who using the mjfame config with 250hz on apex-legends?
@joshconner64733 жыл бұрын
I’m only just realizing Titan 2 has polling rates you can change. Should that be changed to match the polling rate I’m using on the xim? Currently really liking the sync off with 250hz
@XIMCentral3 жыл бұрын
Yes absolutly, your Titan should match your XIM polling rate. Otherwise the Titan will force the console into 1000hz mode while the XIM wants to communicate with 250hz.
@soloitaliano1247 Жыл бұрын
Hello! I have a question about sync off, for having sync off do I need to put 250hz on just xim app or my mouse also? For example if I put 250hz with sync off on the app can I have my mouse on 1000hz or does it need to be 250hz as well?
@XIMCentral Жыл бұрын
Hey, its sufficient to only change your XIM polling rate for as long as your mouse runs on the same, or a higher polling rate.
@soloitaliano1247 Жыл бұрын
@@XIMCentral thanks for responding! Would it even make a difference with a higher polling rate on mouse with sync off and 250hz on xim app?
@XIMCentral Жыл бұрын
@@soloitaliano1247 It will make no difference, your XIM will just accumulate the packets of a higher polling rate and bundle them to the one the XIM uses.
@soloitaliano1247 Жыл бұрын
@@XIMCentral great thank you🤙🏼
@Alt4i_3 жыл бұрын
Hallo, sollte ich doch lieber auf Standard stellen wenn ich auf 120 FPS Monitor spiele und dann die Maus auf 125hz? Oder soll ich bei OFF lassen und 250Hz stellen!? Das wäre jetzt schön zu wissen mein Freund 😊
@XIMCentral3 жыл бұрын
Hey, wenn du Default benutzt dann am besten mit 500/1000hz da es bei einem desync sonst zu zusätzlichen 8 Millisekunden Verzögerung kommt wenn du 125hz benutzt.
@RandyMoss84vikes3 жыл бұрын
So are you saying 1000hz default and 500hz default have different speeds? I only noticed the difference when I have the sync on "off".
@XIMCentral3 жыл бұрын
They are the same, the polling rate will only affect your mouse movements when you use sync off :).
@TheRealCarWashGuy3 жыл бұрын
What setting should I use in BO4 , and should I match the same pulling rate on mouse to xim?
@XIMCentral3 жыл бұрын
Hey, as long as the mouse polls at the same frequency or faster then the XIM you are fine. For BO4 i think default worked out the best, but for the actual values i would recommend to watch my dedicated BO4 config video.
@TheRealCarWashGuy3 жыл бұрын
What about dpi?
@XIMCentral3 жыл бұрын
@@TheRealCarWashGuy I used 3200 dpi :).
@joshuagarcia26423 жыл бұрын
Whats better, Off sync or Default sync for new xbox aim changes with the new cross play update?
@XIMCentral3 жыл бұрын
Which crossplay game are you refering to?
@joshuagarcia26423 жыл бұрын
Sorry for Overwatch
@XIMCentral3 жыл бұрын
@@joshuagarcia2642 I heard the aim mechanic has changed in OW with the addition of the Crossplay feature, do you notice any differences in regard to your aim?
@joshuagarcia26423 жыл бұрын
@@XIMCentral my aim was worse in general, and I still havent pinpointed what it is.
@XIMCentral3 жыл бұрын
@@joshuagarcia2642 All right then please request a retrain of the OW ST Config here, the responsible person will then check if the aiming mechanic has changed. This is currently the only way to track this community.xim.tech/index.php?board=80.0 In my opinion sync off feels better in OW but if there really is a change in the aiming mechanic then you will have to wait for the new ST to solve this.
@robs40503 жыл бұрын
Kam irgendein neues Firmware Update seit Dezember 2020? Habe länger pausiert. Danke für eure Arbeit.
@XIMCentral3 жыл бұрын
Ja das PS5 XIM Beta Update für die Spezialcontroller (siehe mein PS5 XIM Compatibility Video).
@robs40503 жыл бұрын
@@XIMCentral Ah für Ps5 Alles klar, danke 👍🏻
@hannesbliem33453 жыл бұрын
Any recommendation for Destiny 2 on PS5? I am using 250HZ with SYNC OFF at the moment
@hannesbliem33453 жыл бұрын
and 25K DPI on my mouse :-)
@XIMCentral3 жыл бұрын
Those are really good settings for D2 tbh! :)
@Cwlool3 жыл бұрын
What’s tie best sync in ur opinion for apex legends Apex legends is #1 battle royale game can u do some toturials and tips plz Member since 2017 ❤️❤️❤️
@XIMCentral3 жыл бұрын
I am currently working on a new Apex Legends tutorial which will include that :).
@warsmith12943 жыл бұрын
Are you planning on making a Rust Console Edition config tutorial?
@XIMCentral3 жыл бұрын
I can add it to the list!
@rymdii8883 жыл бұрын
@@XIMCentralplease fast haha
@RECKIlES Жыл бұрын
What sync and xim hz is better for ps4 apex legends ?
@XIMCentral Жыл бұрын
Hey, i should have covered that in my "Competitive Apex Legends Config" video. I dont recall the answer right now so id say look it up in that video if necessary! :)
@danielb35863 жыл бұрын
@xim central I bought a Xim apex and I have been using the Xim 4 for a long time. I have curves I use on my XIM4 how would I change the coding of the curve to work for the Xim apex.
@XIMCentral3 жыл бұрын
Hey, the only way is to manually redo them, theres no way to transfer a curve between the two XIM models.
@hhello3352 жыл бұрын
Hi is it possible to set up silent shoot ? Thank you :))?
@XIMCentral2 жыл бұрын
Hey, what is a silent shoot?
@moxqii993 жыл бұрын
I play r6 when i fire my aim fell slow its only when i fire like the recoil I can’t control this where I want
@XIMCentral3 жыл бұрын
Hey, do you maybe have a sub config set to left mouse click with a slow sensitivity value in it?
@moxqii993 жыл бұрын
@@XIMCentral No I don’t
@moxqii993 жыл бұрын
@@XIMCentral how I check that from
@XIMCentral3 жыл бұрын
@@moxqii99 Swipe through your sub configs. Also create a brand new XIM config and dont change anything in it. Check if it still happens with that one too.
@moxqii993 жыл бұрын
@@XIMCentral i will try and reply back later
@CarloAmador3 жыл бұрын
🔥
@CaptObv13 жыл бұрын
When will Xim apex support ps5 games? What about polling for pc input?
@XIMCentral3 жыл бұрын
Hey, see my "PS5 Compatibility Update" video on how you can already play PS5 games with your XIM :).
@CaptObv13 жыл бұрын
Thanks, I have a question about ads sensitivity on my xim apex. I was having a lot of disconnect and I had a message about an out of date st recreation. I forced game download and deleted the st that was giving me trouble. The new st I created has a 1:1 ads sensitivity and does not respond to any number I put. Can you help?
@XIMCentral3 жыл бұрын
@@CaptObv1 Hey, im not exactly sure what you mean but when an ST is outdated (triangle error symbol in the bottom left) then you have to do a force library download via the global settings and create a new game config for that game. Let me know if that solved the issue.
@CaptObv13 жыл бұрын
@@XIMCentral thanks for the reply. Yes I’ve done all that you mentioned. The ads is not slower like I have always set it. It’s fast like my hip sens. I can’t get it to function like it used to
@marcelofilho56573 жыл бұрын
u previous video u did say we can get more aim assist at 250 polling hate and syn off. but if i play at 60fps, i should put syn common? and 120 i should put in default?
@XIMCentral3 жыл бұрын
If you want to sync your inputs to the framerate then use sync common for 60fps. If you want more aim assist use the 250hz sync off trick. Both are different approaches and it depends on what your intention is or how you want your mouse movements to feel. Pick the one that feels the best to you! :)
@marcelofilho56573 жыл бұрын
thankss
@mankybubber3 жыл бұрын
Can I ask what polling rate works best with the cronus zen thanks
@XIMCentral3 жыл бұрын
The Cronus Zen has a 10 millisecond cycle at max from what i know so you should set your XIM to 125hz. For a perfect sync i would recommend to use a Titan Two.
@mankybubber3 жыл бұрын
OK thank you
@alaintrottier52293 жыл бұрын
What is the best setting for Destiny 2 on PS4 Pro? Thanks
@XIMCentral3 жыл бұрын
The PS4 version plays best with sync default or common imo, but i never tried 250hz sync off in it which could also work very well.
@alaintrottier52293 жыл бұрын
@@XIMCentral Thanks, I use 250hz sync off, no curve now, works well. Have used default with curve before. But the difference is minimal
@Luca-yl5qd3 жыл бұрын
hey in r6 i only can peek right and left and meele and sprint at the same time because its the same button on ps4, so how can i fix it?
@XIMCentral3 жыл бұрын
Hey, im not entirely sure what you mean with at the same time. When you are in the HIP mode you should be able to sprint/knife, while in the ADS mode you can lean left and right. You cannot lean in the HIP mode in console RB6, that is only possible in the PC version. Is that what you meant?
@frreelo3 жыл бұрын
is there a way to create something which repeats a certain action? like infinitely crouching so i don’t get kicked for inactivity
@XIMCentral3 жыл бұрын
The XIM doesnt support anything like that but if your mouse or keyboard does then you can use that instead.
@marcelino9813 жыл бұрын
So I’m on common so do I divide it or multiply sorry I’m confused for 250hz
@daapdary3 жыл бұрын
If you go from Common to OFF (250 Hz) then multiply Sensitivity by 4. The other video called *XIM Apex - Secret Aim Assist Settings From Alpha Testers* mentions this conversion at offset 2 minutes, 53 seconds.
@JADC933 жыл бұрын
So if i got this video right, i should use 125Hz synchronization Default, for 120hz games? (PS5)
@XIMCentral3 жыл бұрын
Yes if you want to sync your mouse movements to the framerate of the game. Alternatively you can also go Sync off and 125hz.
@JADC933 жыл бұрын
@@XIMCentral will give it both a try, currently using 250Hz and synchronization off, feels good to
@Vu1gr3 жыл бұрын
Do you have a Xim aux that a could possibly control the new ash recoil 🤣🤣? Because every time I do the auto recoil aux where everytime you shoot it’s supposed to pull down it doesn’t work for me idk why I was wondering if you could just copy and paste maybe a default one and I could adjust the % so it works please ?
@XIMCentral3 жыл бұрын
Hey, try higher values for Ash as with the most recent nerf her weapon has a ton of recoil. Also use the flash hider to reduce the vertical kick :).
@Vu1gr3 жыл бұрын
@@XIMCentral I was wondering could you paste a Xim auxiliaries setting so I could try higher values because it doesn’t work for me at all when I set auxiliaries it doesn’t kick down automatically it only does it when I move my mouse it’s weird so I was wondering if you have just one you’ve used so I can just use and set my settings onit and use a higher value please?
@XIMCentral3 жыл бұрын
@@Vu1gr Hey, this just means your currentl value isnt high enough yet. Some games require higher values before you even see some movement. The clips from this video have been done with the old aiming mechanic, Ubisoft changed it a while ago so the values from this video will have to be higher for RB6 now.
@khalidm4693 жыл бұрын
Do you mean that sync off with 250hz is equal to sync default with 1000hz ? Both take 4ms to send input ?
@khalidm4693 жыл бұрын
What do you recommend for cold war Sync off 250hz or sync default 1000hz Btw i play on pc fps 200
@XIMCentral3 жыл бұрын
Both settings have advantages and disadvantages in terms of aim assist and mouse movements, i would recommend you to try both and then stick to the one that feels best.
@alkatraz91715 ай бұрын
and if i use it on pc with a games that run at like 160-180 fps what sync will be better?and what polling rate? thanks
@XIMCentral5 ай бұрын
In that case you can either go default or off.
@alkatraz91715 ай бұрын
@@XIMCentral with what polling rate? Since i use a ps4 pad conneted the game should recieve 125 hz input?and what dpi for have good AA and nice precision
@XIMCentral5 ай бұрын
@@alkatraz9171 Lower polling rates will provide more AA whereas higher ones have less AA but more responsive mouse movements. There is not one best polling rate since everyone has a different preference for how responsive the aiming inputs should be or how much AA there should be.
@alkatraz91715 ай бұрын
@@XIMCentral ok thanks and the sync will affect that too?rn i am using common sync but wanted to with on default maybe
@XIMCentral5 ай бұрын
@@alkatraz9171 Yes that is correct. The faster the sync (off or default) the less AA you have but the more responsive the mouse movements will be.
@smurfonly52252 жыл бұрын
What should i use for overwatch and what synchroize
@smurfonly52252 жыл бұрын
+what hz should i use for mouse
@XIMCentral2 жыл бұрын
Hey, that depends on how much aim assist you want. If you want an aim assist oriented setup then go with the sync from my most recent OW config video, if you want a PC feeling then with the sync from the OW config video before that.
@smurfonly52252 жыл бұрын
@@XIMCentral cause i watch the secret video u said the game with less 62hz need to play with common so i thought i should switch and u said that 1000hz its not usefull but in ow guid you recommend 1000hz so am confused can u explain
@XIMCentral2 жыл бұрын
@@smurfonly5225 Hey, i did two OW config videos (my two most recent ones). Both configs are still valid. One aims towards the closest PC feeling, the other to maximixe aim assist while maintaining muscle memory. Neither of the two has the aim to only boost aim assist. This is not desireable in OW as you can fine tune the aim assist via the ingame settings anyway. So these secret aim assist settings are more valiable in games with (close to) no ingame aim assist customization. Since OW offers you to completely adjust the aim assist though the main aim assist boost comes from the ingame settings itself.
@diligaf10003 жыл бұрын
What's the best setting for playing games at 120fps?
@XIMCentral3 жыл бұрын
I recently got a 120hz monitor and will test that soon! :)
@diligaf10003 жыл бұрын
@@XIMCentral nice one , yeah it's so much smother , enjoy 😁
@mohammedalmasoudi33813 жыл бұрын
I have a question when I do a mathematical process with cheating I get a result of more than 600 ADS i use poling rat 1000 hz , my ADS(85.5×8=684) my sync in default plz need help
@XIMCentral3 жыл бұрын
Hey, in that case you cannot achieve the sensitivity because it only goes until 500. Instead double your mouse DPI so you can set your ADS to 342 instead to have the same turnspeed.
@duskess64113 жыл бұрын
Thanks xim thats all i got to say :)
@dzrekmode79803 жыл бұрын
Typically play seige. So no aim assist. So should my sync be on default because I'm running 120fps.for better reactivity? Have to up the sens. But I use common.
@dzrekmode79803 жыл бұрын
So I'm curious.
@XIMCentral3 жыл бұрын
Hey, imo sync default plays best in Siege, which includes the 120fps mode! :)
@dzrekmode79803 жыл бұрын
Do you happen to know anything about the recent seige update? Sensitivity is extremely fast now in the app I went from 59 hip yo now like 22
@XIMCentral3 жыл бұрын
@@dzrekmode7980 I will probably make a video on that sometime next week. In general thats a good sign as the lower the XIM Sensitivity the better the mouse movements.
@-dl-charlie89133 жыл бұрын
For PS4 what would be the way you can use these to get the best aim assist on the keyboard and mouse?
@XIMCentral3 жыл бұрын
Hey, for that see my previous upload video :).
@mahmoodcage22513 жыл бұрын
What if i used sync .. slow u said its good for 30fps games.. If i used it with 1000 response .. on 120fps game (im on pc 120fps avg).. In short what is the best settings for game runs at 120 fps ? Sync ? Response ? About mouse speed no worry's will fix that
@XIMCentral3 жыл бұрын
Yes its ideal for 30fps games and will also basically boost the aim assist in games with more fps. The best settings highly depend on what you want to achieve, more aim assist, better mouse movements, ... A good middle ground setting which is decent in all of these areas is sync default 500/1000hz or sync off 250hz.
@mahmoodcage22513 жыл бұрын
@@XIMCentral thanks man ❤️
@banri37863 жыл бұрын
I dont speak english but if i play rainbow six siege at 120 FPS i need 1000hz poling rate or 125hz ? The game have no aim assit so which one i need to choose ?
@XIMCentral3 жыл бұрын
Hey, good settings for RB6 are XIM 250Hz Sync Off or XIM 500Hz/1000Hz Sync Default.
@Valid-vRin3 жыл бұрын
I'm running into this issue with xim when I try to update it on pc. Says "Unable to find xim apex" "Please be sure your xim apex is connected to your pc without any devices attached to it and it is displaying a solid blue light" Which, it is displaying a solid blue light but still unable to connect?
@Valid-vRin3 жыл бұрын
Never mind, I got it working. Never the less if anyone else is having this issue. Try to restart your pc after downloading the update software. It worked for me, & hopefully it works for you too
@rickyricky16563 жыл бұрын
I dont understand… one question: I have a G502 4000 dpi 1000hz , i set xim at 250hz for this trick, right ?
@XIMCentral3 жыл бұрын
Yes and sync off in your XIM HIP and ADS config :).
@darknessknight03 жыл бұрын
What is the best settings for apex legends ? And also can you guys increase the number of sub config ?
@XIMCentral3 жыл бұрын
Today my new Apex Legends tutorial will go into early access, should be out for everyone soon! :)
@darknessknight03 жыл бұрын
@@XIMCentral thanks alot as always 🌹
@darknessknight03 жыл бұрын
@@XIMCentral @Xim central And please is there any way to increase sub config , i’m play apex and already have grenade , healing , inventory , recoil , and i need one more to loot the boxes with my mouse
@XIMCentral3 жыл бұрын
@@darknessknight0 Hey, if you would like to see more sub configs then please share your request on the following board as new feature requests are gathered over there :) community.xim.tech/index.php?board=6.0
@darknessknight03 жыл бұрын
@@XIMCentral is there any release date 😊?
@iceagex3 жыл бұрын
Hi guys!! Just a quick question... Do you recommend 125hz + sync off for aim assist? Or should stick to 250hz + sync off? Great video btw!!!
@XIMCentral3 жыл бұрын
125hz will have more aim assist than 250hz so id say it depends on if that is your target or not. Both will play fine so you have to decide if you prefer slightly more responsive mouse movements or more aim assist :).
@iceagex3 жыл бұрын
@@XIMCentral thanks!!
@iceagex3 жыл бұрын
@@XIMCentral oh and another quick question... For example: with 250hz and sync off I have 100.00 sens on a random game, with 125hz and sync off should I lower this sensitivity to 50 for same sensitivity, right?
@XIMCentral3 жыл бұрын
@@iceagex Yes thats correct!
@matrf3 жыл бұрын
I have been using 500hz. I really wanted to try 250hz but I was afraid I would mess all my configs up. I like my fortnite configuration, but have had a hard time finding something for apex legends that feels right.
@XIMCentral3 жыл бұрын
Hey, see the conversion sheet in the video on how you can maintain the same sensitivity when changing your sync or polling rate! With that sheet your mouse sensitivity will stay the very same! :)
@hmw942 Жыл бұрын
I play xim with crouns what best sycro and heartz in bo3 please
@XIMCentral Жыл бұрын
It doesnt really matter as the Cronus will downgrade your mouse movement experience and add like 10 milliseconds of delay on top. So sync doesnt really have much of an effect anymore.
@hmw942 Жыл бұрын
@@XIMCentral Thanks Can you provide me with more information to design my perfect setup in bo3 xim with crouns
@XIMCentral Жыл бұрын
@@hmw942 I dont own a Cronus device, sorry.
@Mohamed-cu5it3 жыл бұрын
Hi, i have a problem. When i activate the automatizated anti recoil trick in rb6 when i shoot my aim go down with a small % like 20% for twich gun
@XIMCentral3 жыл бұрын
Hey, you have to change the percentage until it matches your weapon recoil. You can further tweak it by using different barrel attachments or weapon grips.
@Mohamed-cu5it3 жыл бұрын
@@XIMCentral ok now it works
@Desxire2 жыл бұрын
Does this mean if you are series s you should use defualt and if you are old gen you should use common? This is for r6
@XIMCentral2 жыл бұрын
Hey, both the new and old Xbox runs on 250hz natively so default should perform best on both consoles unless you go snyc off 250hz. That is of course if you want to match your inputs to the processing loop of the game.
@Desxire2 жыл бұрын
@@XIMCentral ty for the response, i play 1000hz. I find common best for me idk default doesnt feel smooth/consistent at all for me
@mahmoodcage22513 жыл бұрын
If you do that anti recoil thing to us That will be super cool.. If u can make it without any mouse shifting.. What if i used xim and cronus zen will i get that no recoil ? Also is cronus zen shifts down when using no recoil ,? Sorry for those questions but im really Trying to get answers thanks
@XIMCentral3 жыл бұрын
Hey, Cronus + XIM has a bad compatibility, get a Titan Two instead. Yes recoil scripts also have downsides similar to the trick that i showed in my automated recoil video.
@johnsnow21443 жыл бұрын
Can you PLEASE talk about the proper polling rate and synchronization for rainbow six siege for ps4. They recently changed the frames and locked ps4 players back on 60 frames. I have been playing on default and 1000hz on ps4. My aim has felt off since this new season. Because of this change on ps4, should i be using 500 hz?
@XIMCentral3 жыл бұрын
Hey, the responsible person at XIM is already creating a new ST for RB6 that takes these changes into account. Once its out you can use the same config values again that you have used in the previous season.
@johnsnow21443 жыл бұрын
@@XIMCentral what is ST?
@johnsnow21443 жыл бұрын
@@XIMCentral ok. So essentially there will be a new update for the xim configuration. Which we do not have to do anything for
@johnsnow21443 жыл бұрын
@@XIMCentral ok. So essentially there will be a new update for the xim configuration. Which we do not have to do anything for
@XIMCentral3 жыл бұрын
@@johnsnow2144 Yes, once its out you have to download it through the XIM Manager and then create a new game config. Your old one will not be patched.
@RandyMoss84vikes3 жыл бұрын
So the mjfameconfig is too fast at 250hz on off, even with the curve maxed out. Would you try going to 500hz or should i lower the dpi?
@XIMCentral3 жыл бұрын
Hey, adjust your XIM Sensitivity from 500 to 125 to keep the same speed as before with the MJFame config.
@RandyMoss84vikes3 жыл бұрын
@@XIMCentral wouldn't that make it even faster? I thought mjfame was 1000hz on off? So 1000hz would be the slowest?
@XIMCentral3 жыл бұрын
@@RandyMoss84vikes Yes exactly, and when you go from 1000hz to 250hz your sensitivity will be 4 times faster hence just set the XIM sensitivity for MJFame from 500 to 125hz :).
@RandyMoss84vikes3 жыл бұрын
@@XIMCentral 250hz is too fast, so 125hz would be even faster
@Kurrtt_3 жыл бұрын
what't the best sync and polling for RB6 this season??, cuse it feels weird this season on aiming.... my mouse support 1000hz tho
@JADC933 жыл бұрын
I got my mouse on 1000hz my app 250hz and synchronization off
@XIMCentral3 жыл бұрын
There will soon be a new ST for RB6! Then you should be able to have the same mouse experience as in the previous season again :).
@Kurrtt_3 жыл бұрын
@@XIMCentral thank God, i really appreciate all the work for the community... We really need that video ASAP, thank you.
@Kurrtt_3 жыл бұрын
@@JADC93 thanks for the answer... How much dpi are u using?
@XIMCentral3 жыл бұрын
@@Kurrtt_ Im usually using 3200 dpi :).
@killiands67272 жыл бұрын
What is the best sync profil for Xbox Série ?
@XIMCentral2 жыл бұрын
Hey, that depends on the mouse and game. Usually its best to try common, default and off in your favourite game and stick to the one that feels the most comfortable and accurate.
@zflickthacrazyx8676 Жыл бұрын
How will sync slow work do I divide by 2? Or 2x?
@XIMCentral Жыл бұрын
Hey, here you have the conversion sheet: community.xim.tech/index.php?topic=100839.0
@CevsyOld3 жыл бұрын
Is there a way to make a sub config reactive right away after deactivation without another button press? I’m trying to make something easier and I can’t figure it out
@XIMCentral3 жыл бұрын
Hey, there is no deactivation trigger for sub configs so no, you cannot have a sub config activate by no longer pressing a key/button.
@CevsyOld3 жыл бұрын
@@XIMCentral Since you're far more experienced with xim could you help me make crouch strafing effective and easy in apex legends? I've spent a lot of time and everything I can do is clunky or messes other things up
@XIMCentral3 жыл бұрын
@@CevsyOld How does crouch strafing work? What kind of button sequence do you have to press?
@CevsyOld3 жыл бұрын
@@XIMCentral While strafing left and right you hold crouch long enough that it lowers your model and you repeat it over and over while strafing. When you do it right your character looks like they bob up and down while moving making it harder to be hit
@gugus423 жыл бұрын
hello, if we but sync default at 1000hz the rate of the xim is at 125hz or 1000hz, seeing that the default changes between at 125hz, thank you
@XIMCentral3 жыл бұрын
Hey, what do you mean exactly?
@gugus423 жыл бұрын
1000hz défaut sync same 125hz sync off ?
@XIMCentral3 жыл бұрын
@@gugus42 Yes they are basically the same.
@xRecklessPR3 жыл бұрын
Is there a way to have double movement on the xim?
@XIMCentral3 жыл бұрын
Thats not possible at the moment, if you would like to see that please share your request in the XIM Feedback Forum so it can be considered for future firmware versions.
@bull_terrier-8053 жыл бұрын
Can you do one for RUST?
@XIMCentral3 жыл бұрын
I have it on my list, but for now i have to finish some other video projects first :).
@bull_terrier-8053 жыл бұрын
Ok man I'll wait for it thanks. Do you know how long give or take?
@XIMCentral3 жыл бұрын
@@bull_terrier-805 Probably after the new XIM device reveal.
@bull_terrier-8053 жыл бұрын
How much will this be and what about the xim apex after?
@XIMCentral3 жыл бұрын
@@bull_terrier-805 XIM Apex will still continue to be the mouse and keyboard adapter of the XIM company, the new XIM device will be something totally different. Both will receive support by the XIM company.
@bsam51613 жыл бұрын
what’s your xim settings in rainbow six siege r6
@XIMCentral3 жыл бұрын
Hey, for that see my "Competitive RB6 Config" video that i uploaded not too long ago :).
@jeffsmith53673 жыл бұрын
so would i need to run common sync for siege?
@XIMCentral3 жыл бұрын
Id say wait first until the new RB6 ST is out before settling on a sync! :)
@Adam27743 жыл бұрын
So what would I use for siege on xbox one or ps4? Since it has no aim assist and is 60 fps
@ConwayFPS3 жыл бұрын
I use common it’s definitely the best for ps4 siege
@Adam27743 жыл бұрын
@@ConwayFPS same just wanted to make sure I play at like 75 sens wbu
@danielduran60023 жыл бұрын
@@ConwayFPS But siege doesn't run at 80 fps?
@XIMCentral3 жыл бұрын
Tbh it all comes down to what you prefer. Some people prefer the smoother mouse movements with common, other like it more stuttery with default or even off. Most Ximmers will prefer either common or default, but id highly recommend you to try 250hz and sync off as well as thats a setting most people never tried but has great potential.
@XIMCentral3 жыл бұрын
I think the game normally runs at 80fps on the console but with the recent release got capped to 59. At least thats what i heard, im not sure if its true.