XP DEUS SIDS HAMMY SETUP

[@dardobartoli]

After 2 digs, watching multiple tutorials and actually reading the manual, this video is the one where it all finally sank in. Thank you

[@lifesforliving4929]

Hiya Sid, Your Pro settings found me my first hammy and my first Iron age brooch in the first three weeks of using it. Thanks very much for your videos mate 👍👊

[@englandshistory]

I do miss my deus 1, it's a awesome machine

[@neilcleveland7522]

Tried this on a pasture site and took ten paces, got a signal, swapped to my usual Hot program to compare and it did not pick it up, swapped back and got the repeatable signal, nothing fantastic but it was there. Dug down and at about 7-8" first signal first dig a lovely Edward I 3d Bristol mint hammy. Thanks mate !

[@englandshistory]

Neil Cleveland good aint it 🤩👍🏼

[@AlexAlex-ut7pd]

Hi Neil You have absolutely right. Went out yesterday and I was on hot, my brother was on hammy programme. My hot programme didn't picked it up and the hammy programme pick up a strog 89 signal. It was a hammered coin.

[@fellrunner123]

Thanks for that mate, used it today and it worked well. A couple of buttons and a grot popped out so I was happy with that as it was a quiet site. Thanks for sharing.

[@jonathantaylor6125]

Loaded this program last week and used it to great effect. I got a lovely lizzy 6 pence almost as new - detail on it is fantastic! Cheers Sid!

[@chainsaw5026]

Many thanks SID! Using your Hammy Pro setup I bagged my first Hammy !! Banging signal about 6 inches deep. Edward II Penny Looking forward to next outing. :-)

[@fabiobonavera3594]

GOOD SID S !!!! Reserch in higt mineralizescion for program is good ??? Good reserch SID S !! My preferite digger UK ! Good by

[@robertharris8570]

I'm going to try this programme tomorrow Sid. There's a spot on my mate's permission that has brought us a full hammered and some half hammereds as we were leaving the field a few weeks ago, so it's time to go back, focus and dig the rest of those babies out! I'm looking forward to trying your hammy programme and comparing the signals to other programmes to get a feel for when to use each. Cheers bud!

[@englandshistory]

the trick with the deus is to listen to them really iffy faint signals.... if its faint dig it even if jumping around from good signal to iron buzz

[@robertharris8570]

Cheers Sid. Snow has put paid to my detecting, but will let you know how I get on fella!

[@andynicholls7201]

Hi bud, not sure if you still answer thes old vids but I just had a henryv111 groat with these settings. My ground is about 75 should go manual GB at about 80 or tracking? Also I use the hf coil so what frequency should I use for that please? Cheers bud. HAMMMERRREDD!!!

[@englandshistory]

If the machines still stable leave the gb at 88, try the 28 khz… if unstable lower gb but bever go lower than the value…. Your know if gone to low as the coil will false when ever you bang it

[@hovender5778]

Short question: you have made an 202 Discchanal, Why do you put the Disc on 3.2? Just to calm the deus a little bit down?

[@englandshistory]

Yes the hammy programme is a more stable search with less chatter than the pro.... if you want a more open setup use my pro settings.. and adjust the minus discrimination to suit ground... I generally use about -3.0 but will adjust in field to suit

[@Jpcars636]

Got a standard Garret pin pointer and a deus with ws4 headphones no remote but geting interference what’s best option for settings cheers

[@englandshistory]

Go into frequency and expert and shift frequency slightly

[@Jpcars636]

Thanks buddy your a star

[@johnbaker3156]

sid used this on elliptical coil, 28khz, it is a killer, deep as well , best settings on tube ! thankyou

[@tommy88777]

Hi sid, Do you have this set up for the hf coil deus 1 or have you changed since 🍺

[@englandshistory]

I use my sids pro settings using the v5.2

[@malcolmwatts8001]

Only used this programme once or twice and got a queen Mary groat . Excellent 🤗

[@xxyxnxwxaxx9724]

Hi sid, I'm looking at getting a new coil. I have the old black 9inch. I was looking at gettin a 11 inch X35. Also is it worth me gettin a new 9 inch HF coil to replace my old black one. And if so I wouldnt no what HF to get what's diffran e between round HF and olypiticle. I just hear so much about the coils.

[@englandshistory]

YNWA96 if it was me id just get the x35 11 inch and stick with that, it has the high freq anyways and separation is good...

[@xxyxnxwxaxx9724]

@@englandshistory Oh Wright so the X35 is just a bigger version of the 9 inch white coil.

[@englandshistory]

YNWA96 nit the same but similar but with the x35 you get low khz and also the high khz so dint need to keep changing... in my eyes the x35 have made the other coils obsolete....

[@englandshistory]

My prefered coil before x35 was the standard 11 inch but with another 11 inch that has normal khz and the higher it seems a no brainer

[@woodywoods1759]

Great programme Sid, getting on with it really well no hammies yet thou need to venture out of South Wales a bit more I think. Its great at getting the tiny silver's out 😁.

[@Red-ne13]

My mate is running on 5.2 I am on 4.1 The 2 machines behave differently with this program . I have looked back through you old vid's and it gives the same settings for both platforms. The program appears to perform better on 4.1 Your thoughts please?

[@scottscottydog]

Hi Sid, thanks for these settings, do you still use these, or have you updated since. Thanks

[@shamanism9416]

Why 2 of the tones are set to 202? What is the benefit of this ? And what program did you use as a platform ?

[@englandshistory]

Hot programme (9) if using v4 or above or gmp (2) if on v3.2…. The reason of having first 2 tones set at pitch 202 is you don’t need to have as much or any discrimination on.. on the hammy programme you will now hear a iron tone from the coke range all the way down to 0 disc.. the deus will perform better/faster as less processing needed if blocking 0-30 with disc, so eliminates coke… any signal thats not iron tone is a digger.

[@andyp1530]

Hey Sid. Just used your settings on a pasture that i had given up on. F...ing hell.! Some ultra deep finds, George 2, 3 coins from 12-13" and silver sixpence from 9".No hammies as yet. Cheers mate , this will open up some of my old fields again! Andy

[@englandshistory]

it really does bang them deep targets out.... ;-) have fun matey...

[@norfolkbushmanandfriends7916]

i'll be giving this a go today, i'll let you know how i get on. cheers

[@andreacavazzuti7353]

Ciao Sid, vorrei provare a immettere le modifiche che mostri nel video, ma non ho capito da che programma base partire. puoi aiutarmi? (ho un deus 5.2, 1 base, 2 mito2, 3 deus veloce, 4 pitch, 5 maxxim II, 6 profondo, 7 battigia, 8 battigia2, 9 hot, 10 oro nativo) utilizzo piastra x35

[@keithhollinhead6283]

great vid, sid. I will be given it a go. can you please let me know how to cancel old programmes that I have installed in my x p deus.

[@carlbate3786]

What base program did you use for this sid please

[@englandshistory]

9 mate

[@extaziex4735]

Hi Sid which program out of 1-10 did you do these settings on

[@englandshistory]

Hot programme

[@pgibby1000]

Hi ive used the hammy program on my last few outings. The machine seems very chatty beeping for no reason. In the field I have switch to another program and everything is fine really quiet. But I continue to use the hammy program as it seems really deep can anyone help what settings do i need to adjust thanks.

[@klemix4542]

Turn your sensitivity down

[@klemix4542]

Keep it as standard. If this doesn't work stick to a program that works best for you

[@TomWoodCHESHIREMETALDETECTING]

Hi Sid, I will give that one a go mate, hope you told Steve about it , he will only get a cob on...lol, what is your beet program for pasture, I have tried that many, I get confused !!!! I am subbed to you, but no notifications coming up, will check it out. Take care mate GL & HH Tom

[@englandshistory]

i only use hammy setup and my pro setup

[@englandshistory]

if you go to my youtube home page, where it says subscribed next to that theres a bell.... click on that for notifications of every video upload... ;-)

[@jeanie_anne7079]

Nice one Sid, used your deep pasture and hammy setups today on v4.1, lovely mate!

[@Sam-Smith]

Cheers Sid! Will give this a run out at the weekend and let you know 😊

[@Ghost-hp4jc]

What about setting your disc to 0, and notching out 0-29 , as you know the lower the disc the deeper it will seek . This way your getting maximum depth but with the notch your not going to hear the rubbish even though the machine is detecting it . Maybe I’m wrong in this thinking ? What you reckon matey ?

[@bertallsort694]

yole sid.... whats the base program mate b4 ya do ya settings , gmp? dues fast?

[@englandshistory]

Gmp programme 2

[@markallen4358]

Hi Sid thanks for the info, have you got any tips on hf round coil and using v4 .

[@englandshistory]

all depends on the land your on mate..... if on a good ancient site whack it to max khz, reactivity 2.5 or more if need be and the coil will kick ass.... The hf coil is designed mainly for tiny targets and it does this brilliant when on a ancient site, but when used on a area that has modern trash i.e foil, shredded cans etc it becomes a pain as you will be digging the tiniest scrap ever so then id choose the black coil..

[@markallen4358]

englan dshistory detecting

[@markallen4358]

englandshistory detecting i tried your hammy program with hf coil . No hammies but did find five coins and croayer bell 😊

[@markallen4358]

I'm already using 2.5 but at 30 kHz ,I found that the 50 kHz can be a little sensitive , have you had the chance to compare the two different hf coils against each other , and depth between the black and hf coil have you noticed a significant. Difference. I have land which is mineralised and trashy with iron mostly , but is ancient site .

[@englandshistory]

i found that if i ran v4 with -6.4 disc it was noisey... bring disc up to about -3 or until it settles to suit the ground your on.... the higher the frequency in theory the deeper your get on the smaller low conductive targets...

[@grahamturner9704]

Thanks Sid, gonna try this out at the weekend HH mate.

[@alisanimalantics56490]

Thank you I am pulling up silver coins like a gooden with this program it's brilliant

[@englandshistory]

Alison Wakefield happy days ❤️👍🏼👍🏼👍🏼

[@robdavies15]

Hiya sid I'm gunna try your hammy programme which programme is it based on the deus cheers Rob Davies 😁

[@20PRAE02]

hey Sid I like this program, but now im on 4.1. What settings do you prefer in 4.1, can i build your program in gmp when using 4.1. Or do i have to change some settings when in 4.1. Thx for your time. Grts Remy from Holland.

[@patricklennon8345]

what program is this based from

[@englandshistory]

patrick lennon hot

[@OriginalMudSlinger]

hi sid I am wondering if can I use this program on 5.2 ? thanks

[@englandshistory]

snorman72 yes mate 👍🏼

[@OriginalMudSlinger]

thanks mate I wll let you know how I get on @@englandshistory

[@therevster9828]

Nice info I am getting one thnx again mate.

[@coinhuntertreasureking1358]

Best program ever, use the hf coil in 28khz......never found so much hammy before 😉 thank youuuuuuuu!

[@englandshistory]

did you read the small print??? all finds i get 50%....... bahhahahhaha happy hunting coinhunter... ;-)

[@lyndahayward4771]

Are the settings still the same for v5? What’s the best frequency for hf coil? Thanks

[@xxyxnxwxaxx9724]

Hi mate on my frequency I cant do 17.4 . It will only go to 17.6 mate will this affect the settings mate. I dont no how to get 17.4 mate

[@englandshistory]

YNWA96 thats fine mate 👍🏼👍🏼👍🏼👍🏼

[@xxyxnxwxaxx9724]

@@englandshistory Brill. I got my deus yesterday mate, I did have a 400i. So it's obvious a upgrade ha ha. I'm just goin to work through it. So much to learn. If it wasnt for KZbin I'll been you no what.well Up shit creek with out a paddle. I'm lookin forward to go over the ground I've been over with the 400i. What gets me I hear people mention slow swing depending on settings. Will I learn all this stuff eventually mate.

[@englandshistory]

YNWA96 dont try and learn everything at once, put into programme 2 and just enjoy it and get a better understanding, once you have used it for a few months then start to play with settings.... its not a race and the factory settings are very good

[@xxyxnxwxaxx9724]

Just a quick question. On ground balancing. Should I always be 5 under and never go over what ever the ground ballance is mate. I didn quite understand what harry said in one of his films.

[@englandshistory]

YNWA96 just leave on 88 for most searching.... only adjust if the ground is really bad mineralisation... then manually adjust until the search is stable 👍🏼👍🏼👍🏼

[@coinhuntertreasureking1358]

You are a legend sid !! thinking about buying the equinox, keep an close eye on your videos😉 happy hunting😉

[@englandshistory]

it's a grower...... seriously loving it... ;-)

[@zhaezz84]

I am def gona try this on my dirhem field, will let you know how it goes, THX and HH from Denmark :)

[@englandshistory]

if deaf you can change the 3rd and 4th tones to suit your ears ... adjust them so you hear them best i have mine 610 and 782

[@guusnatuur4017]

Sid i have used your programm for a while and it gave me a couple of nice hammered coins. But i accidentally deleted the programm by updating my deus from 4.0 to 4.1 ...now i want to set it back again... But wich one should i take ?. I want the normal programm back and not the pro

[@englandshistory]

P1raat P1raat sids hammy setup

[@woodywoods1759]

Sid just updated the Deus to V4 going to try your program so pinkies crossed.

[@grahamgreen9505]

Hi mate what basic program this you start with looks a banging program and iv got 14 acres which has never been ploughed so items are possibly deep

[@englandshistory]

PROGRAMME 2 GMP

[@TheBrookmeister]

Sid will these settings be ok for v4 ?

[@therevster9828]

Nice one bro good info.

[@carlhudson7482]

What’s the base program

[@englandshistory]

Depends what update your on… if 3.2 and before its based on programme 2, if after 3.2 its based off hot programme

[@welshrelics2983]

Great video mate I'm sure a lot of people will get help from this I will share it on Facebook GL&HH Mark

[@MrTreasureHunter]

Nice one Sid gunna give that a go Lad

[@boocat5780]

Omg was having major probs getting used to my deus but that program you gave was amazing say no more :) 🙌🙌🙌

[@englandshistory]

Happy deus, glad to be of service buddy 👍🏼👍🏼👍🏼

[@boocat5780]

@@englandshistory I found 2 Romans in 20 minutes only ever found Vicky pennies etc until now🙌🙌🙌

[@boocat5780]

@@englandshistory btw just wondered what readings silver would give the Romans were 72

[@englandshistory]

@@boocat5780 if your on a roman site then ignore the numbers... usually there is lots of iron in the ground and that can effect the signals.... dig everything that isn’t a solid iron tone... even the really iffy signals... you will be amazed what your leaving in the ground...

[@boocat5780]

@@englandshistory thanks mate see u on a rally 🙌🙌🙌

[@garrysymington1905]

Can you use these setting on V4 Sid ?

[@granty4955]

Will these settings work on V2 Sid, or will I need to tweak them m8

[@keithwhite9137]

Nice settings but you should never slow down your swing speed with faster reactivity. This can lose a signal. The mistake people make is that they think fast reactivity means they can make massive fast sweeps, which is wrong. But you don't go slow either. Faster reactivity needs a decent swing speed, its set up for that. I have watched people in reactivity 3 slow the coil down and they can't understand why the target has disappeared. I have grabbed the stem of their detector and moved it at a decent mid pace and they have been amazed to see the target come back. If you swing too slowly in faster reactivity you don't let the program do what it is designed to do and you can miss targets. Try it on a test board mate. Experiment with swing speeds with targets near iron. You will see that faster reactivity gives cleaner clearer signals with a nice confident swing.

[@englandshistory]

I hear ya mate but that isnt the case when searching over a bed of roman nails.... Barley moving the coil waiting for a little beep amongst the grunts... But yeah when in normal conditions i imagine your bang on ;-)

[@sandorgaramvolgyi1813]

Keith White, right, that's why I run in the water with low recovery speed (reactivity 1)

[@TomWoodCHESHIREMETALDETECTING]

Hi Sid, loaded the program, went out the next day, forgot to select it, then the last half hour I remembered it, selected it and had a hammy, and a bull head forgery of a shilling, and the signal on both banged out. thanks a lot Sid take care mate GL & HH Tom

[@englandshistory]

Its a killer programme.... The more you use it the better it becomes

[@TomWoodCHESHIREMETALDETECTING]

Hi Sid, I found it very quiet, and I even went up to 97 sens, but when it did hit some thing, you knew about it, I got a signal today, it blew my ears off, and I wasn't going to dig it, I thought a big lump of iron, but I dug it anyway, 6 inch down a tombac button size of a 1p, and that is on pasture, love it mate, I have been subbed to you for a while now, but no notifications coming up, I have moved everyone to a non google notifier now, so should get all notifications now. thanks again sid take care GL & HH Tom

[@xxyxnxwxaxx9724]

Is this Mark's dad, its Ian. Hope your ok Tom. I've just got a xp deus. I bumped into mark the other week, we will have to get out some time. Take care regards Ian.

[@jh-sh3fq]

Is this a v4 setting?

[@englandshistory]

its made or the 3.2 but you can till use it on v4

[@coin_meisternorthwales8464]

Nice settings Sid.. I've done many tests with the Deus for nearly 3 years, your right, it's a deep detector if set up right. I find a lot of Deus users mess up the settings & one setting is working against the other.. This should help some users... How long have you had the Deus?.. has the CTX taken a back seat? Best Wishes Neil :-)

[@englandshistory]

I had the deus before ctx for a few years... Then got ctx... Now ive got both.... Love em both... But the deus is just soooo user friendly.... Please share video.. ;-)

[@coin_meisternorthwales8464]

englandshistory detecting Will do 👍🏻

[@englandshistory]

yeah ctx has been sold and i brought a etrac.... still only use the deus unless going over a good area that has mega deep targets

[@isgelbetiartefaktai7038]

Very good program

[@TREASUREHUNTERSUK]

Will give that a go on my next hunt cheers buddy 👍

[@vladpom4674]

Sorry mate I've got an E-Trac...ha ha ha..Kev..UK.

[@englandshistory]

great machine ;-)