XR5 KO4

A bit of a run through on boost hose connections, wastegate and actuator adjustment for the KO4 turbo on XR5 Focus.

[@jojobutter1]

man you're a lifesaver. This video..which is almost 9 years old.. helped me a heap. I took the turbo off a Volvo s40 2.5 ..been looking for specifics on setting this- and you went over EVERYTHING I needed to know. Thanks so much.

[@TheRebuilt1]

thanks for the knowledge, i'm using for my VW MKIV but this gives me a good baseline of info for adjusting Watergate for over boost issue. Thanks again sire

[@111Apollyon111]

Robbo, as a fellow '5er, thanks heaps for putting this up - and for all your advice on the forums o'course!

[@markuswolmarans6559]

This video melted 2 of my pistons

[@envoking]

lol awesome work uncle chopchop!

[@CamsCarsReviewsHow2s]

If I upgrade to a turbosmart cbv can I still use it with the spacer/bracket to hold the TCV?

[@ondra1you]

Nice vid!

[@zman86turbo]

How do you set up an uprated actuator to this turbo?

[@michaelhayward7790]

If you don't mind me asking, what is the biggest turbo you can put on the xr5

[@T_3rR4h]

Great video Robbo!

[@vieczurable]

Does anyone know what is that opening for visible at 2:47 between his hands? Normally there is a line connected however my one is loose and wobbles inside of a metal socket to all sides and up and down although socket is tightened as much as it can be.

[@manazeldesign6473]

pleas how to adjust westegate for zotye t600 model 2018 or may be the sam of rx 5 thank you

[@lewisdemasi7156]

does the stock diverter valve vent to atmosphere??

[@vatomekhrishvili9265]

can i do it on the car ?

[@kalbi777]

what happens if you preload the spring for 14 psi (for example) would this provide more boost ? and how can the pressure increase if the waste gate starts to open ?

[@RawShogun]

too much means the WG won't open (overboost condition/limp mode).

[@kenmurphy4317]

To much boost and you increase the risk of cracking the liners don't you ?