I finally took the time to give you guys a closer look at the #XR600R race mods. suspension is stock. if I didn't specifically mention something its because its not modified. Thewheelmaster.com fasstco.com lectronfuelsystems.com
Пікірлер: 210
@DieselNDirt_3 жыл бұрын
There are 2 types of riders... Those who spend tens of thousands on brand new bikes trying to make riding as easy as possible for them to be competitive And Those who adapt their riding style to whatever bike they have and make what they have work for them. Keep doing what you do! You have all my respect ✊🏻
@fastguysslowbikes3 жыл бұрын
And then guys like me who spend thousands keeping old junk running LOL
@allistairneil89682 жыл бұрын
There are 2 types of riders... Those that have an XR 600 and... ...those that don"t.
@fairbanksairriders Жыл бұрын
such a great bike, the sound of that low roar.
@ronniewilliz1533 жыл бұрын
The dude on the husky you can tell he was getting mad lol. Nice job. Nice mods.
@janleewalz74683 жыл бұрын
Hahaha
@jimbo42033 жыл бұрын
Raced and rode a 93, xr600 for few years, put a HRC 628cc big bore kit in it ! It was even faster and started great
@pedrollos.p.a.12047 ай бұрын
Добрый день, у меня xr500 1989 года, я могу установить комплект 650 , не подскажите пожлцдет
@nvmcrider84753 жыл бұрын
I had a 94 xr600 and loved that bike. With the low-end power and 10lb flywheel I could out climb all of my buddies on their new 450f's, that thing just hooked up and got traction. I loved the supple suspension for off road, but can't believe the jumps you are hitting with it, mine would bottom out every time the wheels left the ground. Your channel is bringing back good memories, keep it up!
@marcofunes144227 күн бұрын
UN MISIL LA XR600R! LA MEJOR ENDURO! NO HAY CONQUE DARLE!👍👍✌🇦🇷🇦🇷
@dafily16973 жыл бұрын
Some mods that are common for hard uses, and glad to see that the suspensions are sufficient for racing (as I said to my mates: XR's got the best OEM suspension system) , but some loose bolts on sprocket are not serious man ! Even I agree about this part of the bike is the XR's weakness, as there is no "shocks hub" for the rear wheel. Wow, here in France, never seen a bar as yours... at its time, just use some Renthal as usual, and they were enough sufficient on my 600XR (mostly used for long lasting trips on dust, sand and gravels roads)
@izom2 жыл бұрын
great bike- beautiful wheels!
@05magmn3 жыл бұрын
We need more X-r videos!
@johnsummers71843 жыл бұрын
Alright bro now I wanna see you whoop some ass on a TW200 LOL
@monikabgilliam3 жыл бұрын
kzbin.info/www/bejne/jGa0lmaia9dsgsU
@allistairneil89682 жыл бұрын
Jake, you are a lucky son of a gun. Nope, it's not all the hot bikes in your shed. I just wish I had a wife/gf who was OCD about dirt bikes. Also, I loved the mods but I'm not really convinced such a light bike needs those bendy bars so high up. Might put them on my XRV 750 marathon because it is really heavy when I fill up the tanks and it's significantly higher than stock.
@dawidswanepoel25233 жыл бұрын
I have a extremely old yamaha xt250 that I slightly modified for offroad riding only... all I did was install some full knobly tyres, got rid of the lights and speedometer even took the kickstand off aswell as the horn, slapped a motocross number plate on and some fresh grips. Makes me feel like a superhero when I pass people on their new race bikes with the pile of crap I ride.
@ivanyalamov51093 жыл бұрын
that is a lovely bike !!
@robertriera95773 жыл бұрын
Desde que tengo conciencia quiero esa moto...aunque no entiendo el inglés siempre veo tus vídeos... Saludos desde Paraguay
@jamjamjovi3 жыл бұрын
The airbox cover clips are Dzus 1/4 turn clips.
@kylelangworthy96413 жыл бұрын
This is awesome dude
@ricecakeFTW3 жыл бұрын
"they are a pound too heavy" Well you're a pound too heavy. OMG lol 🤣
@trishdelaney10753 жыл бұрын
I tried the Lectron carb route after watching your video. According to Lectron, they do not make a carb for an XR600R. Nice video though!
@fastguysslowbikes3 жыл бұрын
It's going on their website today or tomorrow. But even if you don't see it on the website they can hit it for you period just call them and tell them you want what Jake's got.
@race2race13 жыл бұрын
I just picked up a 1998 XR600R last week. Was curious if you run the stock gearing? Also are the Flex bars any higher than the factory bars and do you run risers? Last question what wider foot pegs are you running?
@Damjansen3 жыл бұрын
Yeah the Lectron will make a big difference in racing, i was thinking of getting one for my TTR600, but for casual enduro it's just to much money, not worth it...
@przygodyhonodyxr60093 жыл бұрын
XR 600 de best 💪💪💪
@maryamolshop17982 жыл бұрын
awesome bike dude. but what is the big scooter you have it?
@bartbullock97422 жыл бұрын
God I love her questions... She shows real interest
@Calwin90 Жыл бұрын
i think a hose clamp would work good for the exhaust..lol just file it thinner if u need too
@joshuacotton64363 жыл бұрын
How much better is the Lectron, do you think the higher idle would affect riding in tight woods
@noahculver3 жыл бұрын
How did you get your exhaust angled out like that? I run the same pipe, and its pointed too far in, so it is melting my fender.
@jakebutler64733 жыл бұрын
gotta get me a set of those wheelmaster wheels
@jonruger3 жыл бұрын
You ever going to go to the modern forks I’m in the process currently on my XR400
@clayboi69393 жыл бұрын
What was that, 12 rpm coming out of the corners??
@user-st5bi3bf9z2 ай бұрын
Nice Bike
@brookmoxley78413 жыл бұрын
Just wondering about Lectron carb. I have an xr650r and an considering changing out my stock carb. Any info would be greatly appreciated. Thanks Brook
@slppissa3 жыл бұрын
Hi, Thanks for sharing your ideas with us. I just wanted to know about your Lectron carburetor. could you please tell us more and what is the Lectron diameter for XR600
@geronimomadmartin34992 жыл бұрын
I would like to know too. I wonder if it makes starting the beast any easier.
@slppissa2 жыл бұрын
@@geronimomadmartin3499 mine is having OEM carburetor and it can start very easily with a jsut little kick ;)
@geronimomadmartin34992 жыл бұрын
@@slppissa Mine is only easy to start if I ride it every day. If I don't ride for a week it's much more difficult.
@slppissa2 жыл бұрын
@@geronimomadmartin3499 Clean the pilot jet well and check it and I am running around 3 turns out air mixture. but with your altitude the jet needle position is also important.. also check the vavle clearance ;)
@vitotrials49483 жыл бұрын
👌
@Boogz-gd3lo Жыл бұрын
Dude. is your rear caliper mount in the swingarm slot...
@Batman450253 жыл бұрын
The airbox clips are called dzues clips / fasteners. Still available from honda.
@fastguysslowbikes3 жыл бұрын
Thanks!!
@brentonpiercy3 жыл бұрын
@@fastguysslowbikes 17225-KN5-671 is the part number. shop.berkeleyhondayamaha.com/fiche_section_detail.asp?section=3594181&category=Motorcycles&make=Honda&year=1997&fveh=1698904
@64maxpower8 ай бұрын
On that 4th gate drop you shot out so fast you jammed the gate into the ground
@Gornflyin Жыл бұрын
The C, in CV carb, is C for Constant. The V is for velocity
@joshlaquerre31972 жыл бұрын
CV carb (contestant velocity carb) . Horrible carb for jump good on road so I get why you would go with the carb you went with. I am constantly breaking spokes. Do you know a web site for spoke can't find them for my bike but I'm also running a 17 inch wheel. Pain in ass
@Willowcreek195 ай бұрын
Only guys this age that love the XR600 probably spent some time chasing someone they admired. Chased them while riding an XR80.
@Kyle-pl6rl3 жыл бұрын
I liked my flexx bars but the lower tube split. I was curious out the lectron, does it have a pump shot?
@fastguysslowbikes3 жыл бұрын
No
@toddi23673 жыл бұрын
is that seat cover for a crf 450r ? cool bike....
@TR8503 жыл бұрын
As I am not so familiar with the XRs, are the stock hubs rigid, too? Or do they have damping elements between the actual hub ans the sprocket carrier? That would explain the weight difference and also the additional perceived flex. Not sure the bike could be ridden on road as a dual sport bike with the Warp 9 hubs.
@fastguysslowbikes3 жыл бұрын
No they do not have cush drive hubs
@thomasc64122 жыл бұрын
Jesus lol come to Spain and see some of the XR600’s tyres here , so worn they are now slicks. (I know the tyre in the video is on the 250)
@bones6173 Жыл бұрын
Do you really race that thing with a kickstand on it how freaking crazy is that
@bagumajoseph900810 ай бұрын
I really feel like riding that motorcycle
@allistairneil89682 жыл бұрын
The incredibly arid sense of humour only goes to platform probably the best motorcycle anyone can ever own.
@lasbacannseeds62652 жыл бұрын
Could you please tell me which is your rear fender? I m looking for a fender without holes for xr 600 .. thanks
@markcdeyoung31183 жыл бұрын
Two XR600'S that's like lots more ×'s sweeter that one I keep a pretty big piggy heard myself 10
@adamkimball10093 жыл бұрын
What ever happened to your 1993 xr650l?
@bernardmcnamara Жыл бұрын
What the cam grid degrees that you're running?
@ricknoonan86403 жыл бұрын
Have an knowledge of how a XR400 is? Worth looking into?
@usa45v263 жыл бұрын
What bend flex bars are you running? 10,12, 15 degree etc? Have you tried them on your YZF?
@fastguysslowbikes3 жыл бұрын
That's a good question. At the time I ordered them I told them to give me the bend that was the closest to the stock Kawasaki 450 bend. And no I haven't put them on this particular 250 FX, but the fx needs them more than the XR.
@usa45v263 жыл бұрын
@@fastguysslowbikes Their comparable bar should be the 12 degree moto, similar to oem Kawasaki and Yamaha. Thinking of trying them on my '20 YZ450F. Thanks for the vids.
@connysjostrom57873 жыл бұрын
@7:23 Was that tightend with LocTite? ;)
@fastguysslowbikes3 жыл бұрын
Not sure. The shop did it
@braap_biglunch3 жыл бұрын
There's a guy in san jose ca, that makes a bearing adapter to run a crf450 front end, be a good mod for this beast
@fastguysslowbikes3 жыл бұрын
For the forks and all? I don't want crf forks. Too stiff.
@braap_biglunch3 жыл бұрын
@@fastguysslowbikes always can have them resprung and valved or fit a kyb fork, the mod just allows the use of the bigger modern bearing size
@fastguysslowbikes3 жыл бұрын
@@braap_biglunch but then why would I spend money on stiffer forks just to make them feel more like the XR forks?
@rustyshackleford6533 жыл бұрын
@@fastguysslowbikes you actually like the wet noodles? I personally prefer to have the front wheel point perpendicular my handlebars rather than wander around doing its own thing, but I guess that’s just me.
@fastguysslowbikes3 жыл бұрын
@@rustyshackleford653 mine goes where I point it.
@miahndes3 жыл бұрын
I'm looking at taking over my Dad's old XR. did you do anything to the suspension? I know I'll need to respring it as I'm a bit heavier any other recomendations?
@fastguysslowbikes3 жыл бұрын
I recommend riding it first to make sure that it even needs adjustment. And then sending it to a professional and telling them what kind of riding you'll be doing
@miahndes3 жыл бұрын
@@fastguysslowbikes thanks, I've ridden it a couple times and it bottoms out really really easily
@johangoossens10353 жыл бұрын
i want to know what you eat , what you drink , your sleeping routine and if possible a little bit of your blood -i've sold my 6oo to spend more time with the kids , now they dont need dad anymore and i'm whitout my thrusty steed (ive had a yam 400 2stroke, xr 500 ,350,suzi 250 xr 350, xr 600)-still miss my 600,loads off fun never let me down-i'm 59 and still get ....exited only by thinking of my xr
@motoroker29752 жыл бұрын
What can you say about keihin fcr40 (41) mx on xr600r?
@CR5003 жыл бұрын
Where can I get that lectron carb for the 600? I’ve looked but have never found one
@fastguysslowbikes3 жыл бұрын
Just call them and tell them you want the same carb as Jacob
@mccoymrm3 жыл бұрын
This fucker is one helluva rider. Been watching him for years! He can take a 650l and ride it like it's a 250r.
@BULPIN8473 ай бұрын
I've got the mccooney flatslide from x.R's only. I hate it. It likes to stick closed. The idle screw cuts a groove into the slider. Then it starts sticking closed. Bought a new slider in idle screw. Now it's doing the same thing again. Huge distraction.
@djfloet2 ай бұрын
What is the name of your recommended carb ? I am struggling with flooding issues on my XR .... and I am fed up removing the Keihin frequently...greetings from Germany....
@paulairola70412 жыл бұрын
In the early 90's I desert raced my 92 Honda xr600r with great success, running 14-48 sprockets, Not to mention the best handling bike I ever owned!
@evananders91073 жыл бұрын
Curious on your suspension set up? Stock? Stiffer springs? Ect... 👍🏻
@fastguysslowbikes3 жыл бұрын
Stock
@evananders91073 жыл бұрын
Appreciate the reply! I have a sweet big bore xr400 build I’m 3/4 way done, local A rider aswell, keep ripping 🤘🏻
@molepitbikes3 жыл бұрын
Nice Vídeo and nice xr. A question, wich tires has the last yamaha shown ?
@YouThinkAboutThis3 жыл бұрын
Suspension?
@erickyzer17143 жыл бұрын
What tires are you running
@michaelanderson37712 жыл бұрын
Best bike Honda has made for off road and single lane. Try a yokahama super digger
@thomasbraun56023 жыл бұрын
What is the name or brand of your tubeless mod, i never seen such a Red Tube on a rim. Is it a complette kid for every Bike and rim? Does it fit also fore the T7?
@fastguysslowbikes3 жыл бұрын
Tubliss
@juniooliveirabrasil74543 жыл бұрын
xr600r fera na trilha
@gertkristensen645111 ай бұрын
xr600r power
@juangiraldo56633 жыл бұрын
Hi friend...Nice Job, nice bike, i have question ....the engine have any modifications? With these modifications, how much is the bike weighing? thanks
@fastguysslowbikes3 жыл бұрын
No mods to the the engine!
@juangiraldo56633 жыл бұрын
@@fastguysslowbikes ok .. thanks .. weight this bike with mods ?
@fastguysslowbikes3 жыл бұрын
@@juangiraldo5663 heavy
@juliocesarortizbarbosa12753 жыл бұрын
Muy buen video amigo una pregunta de que marca son los rines
@loxeyloba58973 жыл бұрын
Ask in English and you'll have a better chance of getting a response
@Prisonmike893 жыл бұрын
Hey curious what your camera setup is
@fastguysslowbikes3 жыл бұрын
This was shot with my note 10. But I have another video on my channel about helmet cam chin mount setups if you want to know what I use racing.
@dusanpavlik89472 жыл бұрын
👍👍👍XR👍👍👍600👍👍👍R PERFEKTNE KLADIVO 🔨🔨🔨
@scottlucia14853 жыл бұрын
Good video but can’t hear you, invest in a cheap mic 🎙 can hear the camera operator fine.
@christoforospilitsis5413 жыл бұрын
Yea, volume all the way up on iPad,put in headphones,still barely hear ya.
@phillippearce96802 жыл бұрын
👍
@matiasjesustorres46143 жыл бұрын
Whats about forks?
@williamgannon61322 жыл бұрын
Why isn't there a link for any of these parts
@Psykam Жыл бұрын
somebody please buy this dude a bottle of loctite
@belkenator3 жыл бұрын
Tubliss was one of the best mods I've done. 100mph on the freeway with 0 psi both full knobby tires for proof of concept.
@davidramsay10553 жыл бұрын
Put one on my RM 250 they are incredible! You don't realize how much traction your loosing till you try one! My bike felt insanely fast because the power was actually going to the ground. Had the same one for years. In moto nasty rocks sand everything just maintenance it an they should last
@rustyshackleford6533 жыл бұрын
You need to be careful giving the comments section what they ask for. If you keep on backsliding you’ll be doing tire reviews before the start of the next riding season.
@fastguysslowbikes3 жыл бұрын
I'm not doing it for them. I'm doing it for the views$$$
@FonicsSuck3 жыл бұрын
@@fastguysslowbikes part of what I enjoy about your channel is your brutal honesty
@ronniewilliz1533 жыл бұрын
Ur a lb to heavy lmfao 😂😂👊 nice 1.
@fastguysslowbikes3 жыл бұрын
I've seriously seen a 250lb guy say that they're too heavy.
Most of these bikes are pretty beat or heavily modded that I’m coming across. What’s the going rate for a fair deal on an XR 600?
@fastguysslowbikes3 жыл бұрын
Of you want a fair deal be prepared to shop for years. Everyone thinks they're soooooo special. I paid $2200 for this and I had to drive 12 hours away to get it. They're not that special. I just wanted it for the channel.
@vonzips3 жыл бұрын
@@fastguysslowbikes I mean, it’s awesome that they’re solid bikes and run for years. But some of the prices I’m seeing, I’m not that far from a new bike that I can take my time upgrading. Thanks for the reply, and I enjoy the channel! Thanks for making a slow guy think he can actually ride fast in the dirt!
@fastguysslowbikes3 жыл бұрын
@@vonzips they're not as reliable as you hear. They're plagued with transmission problems. Both my 95 and 88 are both down right now.
@nunyabidness69732 жыл бұрын
that nice pink stomper lol we know what it is
@rolandrodriguez38542 жыл бұрын
What size carb?
@dezracr Жыл бұрын
Your silencer mount bolt is loose too
@bartbullock97422 жыл бұрын
How many people caught the brake check at a minute 25
@bartbullock97422 жыл бұрын
Peppermint oil... The best bike cleaner on planet Earth
@sandonsowers48312 жыл бұрын
I have the same 95 xr 600, only thing I'd add on is steering dampening, and that's about it
@sandonsowers48312 жыл бұрын
But running super trapp exhaust, and factory efx seat cover, looking to put a new header on but good luck on that
@fastguysslowbikes2 жыл бұрын
Mine is the most stable bike I've ever ridden. I can't imagine needing a stabilizer.
@sandonsowers48312 жыл бұрын
The bike is stable this is true, but it would be nice to have especially out west in Utah on really rocky terrain, not a necessity but would be nice when going fast over rough terrain or silty sand and washout areas, but not enough to justify dropping 600 plus on lol step dad has a xr650 r with the dampener and makes hitting that terrain a little bit nicer
@sandonsowers48312 жыл бұрын
Other than that everything is stock on the bike
@wildamericanarchery51293 жыл бұрын
Can you tell me the part number for that electronic carb? I have a xr 600r
@fastguysslowbikes3 жыл бұрын
Just email lectron and tell them you want what Jacob Gilliam has!
@Palmdalebandit_3 жыл бұрын
Fronts being new matter way more than rears
@Basstaco693 жыл бұрын
Where does one find parts for these year bikes
@fastguysslowbikes3 жыл бұрын
It's not easy. I waited months for transmission parts.
@dusanpavlik89472 жыл бұрын
👍 kdo umí ten umí 👍
@chadwhite7290 Жыл бұрын
Love it but no way you can get a holeshot on those 2 strokes
@fastguysslowbikes Жыл бұрын
Obviously you haven't seen the rest of my channel with all the holeshot videos.
@dustinh41753 жыл бұрын
So cdi?
@simonlanc13 жыл бұрын
So no suspension mods????
@fastguysslowbikes3 жыл бұрын
It doesn't need them
@frommalimusah51413 жыл бұрын
I like this white moto You sell one to me ??
@doubledown93333 жыл бұрын
Missing your content dude:)
@fastguysslowbikes3 жыл бұрын
Sorry about that. I flew out to California to help with the fire clean up. But I did grab a new xr650r to race when I get home.
@doubledown93333 жыл бұрын
@@fastguysslowbikes sweet, looking forward to your cam on the 650R, sounds like you been workin hard:)
@fastguysslowbikes3 жыл бұрын
@@doubledown9333 ya have to work extra hard to pay for all the transmission work on these XRs!
@doubledown93333 жыл бұрын
@@fastguysslowbikes Did you have to do the transmission on the R?
@fastguysslowbikes3 жыл бұрын
@@doubledown9333 ya I did it once and it only made it one race. She's falling out of gear again.
@stephendavis7707 Жыл бұрын
any suspension changes ?
@fastguysslowbikes Жыл бұрын
Not a thing
@robertandersson25233 жыл бұрын
What about the suspension?
@fastguysslowbikes3 жыл бұрын
Stock
@robertandersson25233 жыл бұрын
I must have one again
@bartbullock97422 жыл бұрын
And if the track was sloppy wet.. the best you can hope for was second