Xs650 bobber PMA & CDI install part 1

  Рет қаралды 5,235

Skidmore’s Garage Motorsport

Skidmore’s Garage Motorsport

4 жыл бұрын

Пікірлер: 15
@richiebainbridge2608
@richiebainbridge2608 3 жыл бұрын
Looking forward to the next instalment.
@skidmores.garage
@skidmores.garage 6 ай бұрын
shouldn't have sold this bike
@ludditeneaderthal
@ludditeneaderthal 7 ай бұрын
Late to the party, but the "secret sauce" to keeping a key stuck in the keyway while you install a hub, gear, rotor, etc: a tiny dab of CA "super glue" applied with a sewing needle at the bottom of the keyway. Not even a full drop, just a hairline smear, lol. That'll stick it well, yet let go if you tickle the key with a soldering iron, or bash it with a punch.
@skidmores.garage
@skidmores.garage 7 ай бұрын
hey bud thats a good idea mate, yep a little late as i sold this bike to a collector years ago lol
@shannonkaiser9592
@shannonkaiser9592 2 жыл бұрын
I'm working on an 81 Yamaha XS650 bobber build I'm trying to find out information on how to switch mine over to kick-start only no battery having a hard time finding out which kit do I need to do that with and also do I still need to use my points that are in the bike now I picked up a rolling chassis the bike is kind of copped up with the wiring and I'm not sure where all the wiring goes or what to do I'm a newbie to it but I am mechanically inclined and a quick learner is there any info you can give me or any way you can help me by the way that's a sweet looking build you have
@skidmores.garage
@skidmores.garage 2 жыл бұрын
Hey buddy, where are you from. This kit and ones like it don’t use the points you just take it all out as it picks up the position of the generator it’s self, this kit dose battery or battery less as it comes with a small capacitor that holds the charge needed that just ticks away as it’s like a small battery probably 2” long. I have very minimal wiring in my bike, this kit is very simple to use and wire
@skidmores.garage
@skidmores.garage 2 жыл бұрын
Also watch part 2 of the install as some changes were made
@shannonkaiser9592
@shannonkaiser9592 2 жыл бұрын
@@skidmores.garage I'm from North Carolina
@shannonkaiser9592
@shannonkaiser9592 2 жыл бұрын
Would I need to install his basic kit or would I also need the CDI
@skidmores.garage
@skidmores.garage 2 жыл бұрын
@@shannonkaiser9592 I just brought the best kit he had mate, wasn’t that expensive to be honest. The CDI type is the one to get rid of the points set up so it is best in my opinion. Give him a call he is a lovely chap
Yamaha xs650 bobber single inlet build part 1
20:03
Skidmore’s Garage Motorsport
Рет қаралды 1,8 М.
Hughs Handbuilt XS650 PMA CDI Kit How To Installation
20:32
Octane & Electrons
Рет қаралды 41 М.
Mom's Unique Approach to Teaching Kids Hygiene #shorts
00:16
Fabiosa Stories
Рет қаралды 36 МЛН
КАК ДУМАЕТЕ КТО ВЫЙГРАЕТ😂
00:29
МЯТНАЯ ФАНТА
Рет қаралды 10 МЛН
EVOLUTION OF ICE CREAM 😱 #shorts
00:11
Savage Vlogs
Рет қаралды 10 МЛН
pamco part 1 9 minutes
9:01
83bobber
Рет қаралды 34 М.
How to Wire Your Chopper | Part 1
10:35
Grease's Garage
Рет қаралды 36 М.
Yamaha XS650 - Episode 4
20:04
Butlers Customs
Рет қаралды 7 М.
XS650 Mikuni VM34 Carb Swap & Setup
10:03
2 Wheel Workshop
Рет қаралды 26 М.
XS650 Bobber ignition wired and fired
15:23
Built at Blackjack's
Рет қаралды 9 М.
Boyer Bransden Micro Digital Fitting & setting up
8:14
blimeyolriley
Рет қаралды 30 М.
Our First Chopper Build | Yamaha XS650 | Purpose Built Moto
34:41
Purpose Built Moto
Рет қаралды 15 М.
Фишки FORD F-150. Часть 2
0:54
Fresh Маркетплейс
Рет қаралды 3,2 МЛН
Чуть крылья не оторвал при разгрузки
0:38
@nastya_adaeva_ #рек #automobile #авто #авария #машина #топ #ремонт
0:29
Мальчик стал гонщиком в 5 лет
0:14
Короче, новости
Рет қаралды 1,2 МЛН
BYD U8 танковый разворот
1:00
YOUR NEW AUTO
Рет қаралды 2,2 МЛН
#يوميات_سائق_شاحنة_في_المانيا_ابوعباس
0:26