XSPOWER TURBO KIT INSTALL - 2002 LEXUS IS300 SPORTCROSS

TURBO INSTALL PARTS:
Deatschwerks 550cc injectors
Walbro 255 fuel pump
Ngk bkr7e plugs
XSPower turbo kit
XSPower intercooler kit
Innovate LC-2 with DB guage
AEM boost guage
3D printed guage pod
GReddy E-manage Ultimate
GReddy map sensor
MODS:
Custom 3inch stainless exhaust with vibrant TPV turbo muffler
Tenzo R type M V2 wheels
Tein Street Basis coilovers
Eibach sway bars
Megan Racing front strut brace
W55 manual swap with factory ECU, cluster, pedals, and drive shaft
Factory LSD
LexPro performance short throw shifter
Fidanza lightweight flywheel
ACT XT street sprung clutch
Brian Crower 264 cams
Titan adjustable exhaust cam gear
#AFTER7BUILT
AFTER7GARAGE

[@Jursaw]

This is the type of youtube content I enjoy watching!

[@Tunasub1993]

Wait wait wait....am i the only who noticed the A Skylit Drive blasting in the background? Much respect

[@After7Garage]

Hell yeah brother!! Still listening today 🤘

[@Tunasub1993]

You can't even say it's on some spotify shuffle. I can hear the wires album playin lol freakin throwback!!!

[@After7Garage]

Haha you nailed it!! No Spotify here. Apple Music, straight to the full album!!!

[@Tunasub1993]

@After 7 Garage freakin legit! Must have had a hard time workin on the car with all the head bangin you must have been doin lol

[@youngbullsgarage7322]

Thank you guys for all the help you’ve given me man my build is almost complete and I’ve done almost exactly the same set up

[@After7Garage]

So glad to help! You got this 🤝

[@youngbullsgarage7322]

@@After7Garage she’s going to the tuner the 22nd

[@sym6oI]

@@youngbullsgarage7322 how did it turn out

[@youngbullsgarage7322]

@@sym6oI the turbo that came with my kit took a shit on me on the first pull so I bought a borgwarner sx300sxe and I’m waiting on exhaust and intake modifications before I can go to tuning again

[@sym6oI]

@@youngbullsgarage7322 Rip, and that’s sick. Goodluck. I’m ordering a greddy exhaust with some fuel injectors, fuel pump, couple other dumb things for mine. It’s all stock never been touched yet

[@jzmafiaa5468]

I got the DW 700cc never put the plastic caps on didn't know you had to do that

[@Tunasub1993]

AND STICK STICKLY???, IM FREAKIN WILD N OUT HERE BOYS!

[@alexjaybrady]

Beautiful! Cant wait to have this done to my Sportcross one day. Whats a rough budget for these parts and the work?

[@markkomlev6334]

Did you have to buy any extra couplers or anything for the intercooler piping. I bought a kit for 2jz ge and I’m hoping it will all fit I had to clock my turbo the same way yours is in the video so it can bolt on correctly. If I clock it downwards like other people usually do my turbo hits the manifold and won’t sit properly and won’t bolt down please help

[@rogermurillo5608]

how long did the turbo kit take to arrive? You running stock internals?Hp?

[@After7Garage]

Stock internals, BC cams and cam gears. Have not dynoed it still. But 2 years it’s still running strong. Fun weekend car

[@youngbullsgarage7322]

Can I see how the intercooler piping was routed

[@After7Garage]

I’ll try to get a video of that for you sometime soon, been extremely busy. The piping routes very tightly, it was tough to get it all hooked up!

[@youngbullsgarage7322]

@@After7Garage if you don’t mind could you also send me your base tune😭 I apologize for the constant questions.

[@peoplesambassadordm8279]

Where did you sourced the ECU performance??

[@davidg.9446]

Just a question here . When drilling the oil pan for the return , how do you make sure no metal fragments are left in the pan after drilling a pan while still on the car ?

[@After7Garage]

Great question! This is something we thought about for a while as well. While drilling, we blew the shavings away while it was still drilling. Once it penetrates through, yes there will be some shavings. Once the fitting is installed we put on the drain hose to the fitting like normal. Then put a funnel on the hose and ran about 5 quarts of bulk oil through it to flush it haha

[@davidg.9446]

Oh I see . I would be so scared a piece would get in the motor and mess it up . Lol thanks for your time and knowledge.

[@red.2jz]

@@davidg.9446 I would assume dropping the oil pan and then tapping it and cleaning it would be the best way to prevent any metal shavings from getting into the engine.

[@Knownworldwide]

@@red.2jz yes absolutely, don’t do what those clowns did. There is absolutely metal in that pan.

[@kevin_jrm7350]

How much was spent in the whole process, I want to this in my is300

[@youngbullsgarage7322]

The kit itself is $1500

[@fundrive9621]

I did my research and didn’t find a link to this turbo kit except this one really sketchy link please send the link if you still have it.

[@After7Garage]

I don’t think it’s available any more. All budget kits will be sketchy and require a lot of work to make it right. We spent a lot of time off camera making the piping work, didn’t have enough in the kit.

[@javisix5722]

We’re ready for the follow up video 👀

[@After7Garage]

Say less! The owner just had a birthday and we are well over due on getting together for a follow up video!!

[@After7Garage]

Follow up video is done! Posting it today!

[@calebcantrell1037]

Plz tell me you shot it in landscape mode, otherwise I can't wait to see it!

[@peoplesambassadordm8279]

How much power is projected after install of this project?

[@CreArtStuff]

Would there be check engine codes afterwards?

[@tariqwalker81]

Where did you get your wastegate spring And lines ?And how did you cap off the air assist to the fuel?

[@tariqwalker81]

I wanna run boost by the Wastegate because i don’t have stock ecu for now

[@PrimoDRINK]

Awesome! I’m in northern va but have been wanting to do a nice street na-t setup. Low to mid 300s. I have factory 5 speed so w55 trans. Hence why I’m not looking for anything crazy. What trans was this sportcross running? How much power did it end up making? Looking forward to future videos

[@After7Garage]

He is running the 5spd manual from a sedan and a lsd diff swap as well. Have not dynoed it yet but I’d say close to 300 to the wheels

[@3EST3V4R]

What size intercooler piping did you use

[@youngbullsgarage7322]

Can I see the intercooler pipe route?

[@OCTAVIO_MINIER]

Where did you buy that connector for the ecu and the manage?

[@After7Garage]

It’s in the description. Greddy E-manage with boomslang harness

[@tommykhan4389]

More videos pls

[@After7Garage]

We will be shooting a follow up video soon!

[@mikesmods]

How long ago did you order your kit? I was looking to order one and it looks like they dont use the intercooler that clears the crash bar anymore

[@After7Garage]

Let me check with the owner and find out. I want to say he ordered it 6 months ago

[@willtyson9338]

"LEXUS IS300 2jzge TOYOTA SUPRA TURBO FMIC KIT BOLT ON, Toyota Turbo Kits, XS Power Inc." xs-power.com/toyota-turbo-kits-9.htm Turbo kit comes with a universal intercooler, gotta get the kit in the link to get the intercooler that clears the crash bar. Definitely worth a call to them to see if they can modify the kit to make it come with only what you want.

[@mikesmods]

@@willtyson9338 awesome ya I emailed him and ended up paying 1650 for the kit that included the piping Im hoping that for the extra its not the universal intercooler im going to message him and double check he said itd take 6-7 business days im not holding my breath on that but it is what he said lol

[@willtyson9338]

@@mikesmods Sounds about right. Be prepared, tracking numbers aren't great and it definitely takes the stated business days and then some. That's the one thing that kind of irked me, not getting things super quickly. I'm not known for my patience though lol

[@Mqxwell]

You ever sell that AEM?? Dope video

[@After7Garage]

Haha I don’t think so. Looking for local pick up or simple shipping

[@Mqxwell]

@@After7Garage I have other things I should buy first anyway (for context, I do have a cold air intake, but it's not the best and one of the vacuum line bungs is the wrong size so I have a big vacuum leak)...I should really just get an adapter instead of a $500 intake.

[@Mattscalf]

Did you buy this kit off the XS website or Amazon?

[@After7Garage]

I believe he bought the kit from XS website. He got shipped a turbo that was bigger than ordered, but we made it work!

[@Mattscalf]

@@After7Garage oh awesome!

[@Kale-4237]

can you send the exact link to the product on the site I don't wanna spend $1700 just to get scrammed thx

[@After7Garage]

Haha it was more than $1700. You need more than just the turbo kit.

[@Kale-4237]

@@After7Garage oh nice what else do you need? it comes with the manifold turbo ic ic piping and bov and a few extras right?

[@JoyLong]

I’ll buy that intake, how much? I’m in Charlotte, NC btw.

[@After7Garage]

Let me see if I can find the clamps haha. We are in Raleigh if you'd like to drive out and pick it up one day!

[@spachuladgaming651]

Link to the kit?

[@MangosArtClub]

Great job, how much to ship the old intake to the UK?

[@After7Garage]

Haha probably quite a bit from North Carolina!

[@MangosArtClub]

@@After7Garage Fair enough bro you're probably right 🤣

[@justinmagana9630]

How did the car run with the emanage ?

[@After7Garage]

The car runs very well for a piggy back ecu setup. The software takes a bit of a learning curve to figure out but all you need is a laptop and some time/knowledge. The biggest thing was finding a basemap and getting the ignition timing worked out.

[@jaysmith2385]

What Ecu was used?

[@After7Garage]

factory ecu with Greddy E-manage ultimate piggy back

[@Skxxtz]

Still got that intake?

[@After7Garage]

Haha let me check with the owner

[@user-zz1to4og1w]

Ecu what?

[@After7Garage]

Greddy E-manage ultimate piggy back

[@user-zz1to4og1w]

@@After7Garage thank you.

[@user-zz1to4og1w]

@@After7Garage Are you using the same map?