XSR700 | LSL X01 motorbike handlebar installation

Here is my quick non-pro installation from stock to LSL X01 handlebar.
It was a learning experience. LSL X01 handlebar gives the bike more aggressive looks
and light handling.
MT07 NEW EXHAUST!
• MT07 2020 with Akrapov...
XSR700 X MT07 CP2 BROTHERS
• The new MT07 2020! Is ...
WALES ON TWO WHEELS ROAD TRIP
Day 1
• Wales part 1/3 - XSR70...
Day 2
• Wales part 2/3 - XSR70...
Day 3
• Wales part 3/3 - XSR70...
XSR700 MODS 👇🏽👇🏽👇🏽👇🏽
Evotech tail tidy installation - • XSR700 TAIL TIDY | EVO...
Shin-yo Indicator installation - • XSR700 | New motorbike...
Quadlock USB charger installation - • XSR700 | Quadlock USB ...
Evotech brakes/clutch levers - • XSR700 | Evotech short...
Dart fly-screen - • XSR700 | Dart piranha ...
Muc-off unboxing - • MUC-OFF PRESSURE WASHE...
How I wash my bike - • XSR700 | Motowash with...
My first motovlog - • XSR700 | My first moto...
Instagram - / jstnrides
LSL X01 handlebar - www.louis-moto...
#XSR700 #GOPRO #LSLHANDLERBAR #pinoyrider

[@chowmeinpapi]

Bro thank you for this. Short n sweet. My bar just came in. I'm gonna tackle it this weekend. I'll be sure to slide the clutch perch on before mounting the bar haha. Cheers.

[@JstnRides]

Well spotted on the clutch, hahaha.

[@chowmeinpapi]

JstnMrcn I noticed quite a bit more vibration without the stock bar ends. Did you?

[@JstnRides]

chowmeinpapi mine has light vibration, Im still looking to get an appropriate bar end for mine. Lsl has some range of bar ends.

[@ramcyruslingayo9936]

Any difference on your back? Or still relaxed driving?

[@geraldfronda6241]

Three point one K views in a few months. Well that awesome. Congrats buddy.

[@MT-THNDR207]

Btw, the throttle pulley housing is supposed to point forward, not up.

[@gregsanford3848]

Have carbon fiber bars for 700 ,install very soon

[@Pentoute45]

Good on you you kept the locating pins (and drilled the appropriate holes for that effect). I'm looking on swapping my own handlebar soon. Maybe for the xsr900 one that might come pre-drilled. Beside the topic, what's your exhaust model ? Sounded pretty sweet.

[@JstnRides]

Doing it the right way. I got Akrapovic carbon

[@kendtchileninjah5905]

Got the Hurricane Fat set coming and needed to see how tough it was to remove the throttle and left grip. How tough was the throttle cable installation? I think there’s pre-drilled holes. I’ve never done it. Plus after the WD..what’d you use to reinstall the left grip?

[@JstnRides]

Throttle cable is pretty easy with grips I used WD40 and make sure you got the right tools.

[@flopper8]

Im looking at getting this bike but can't decide on bars - was thinking rizoma or renthal but yours look pretty good to me. Do you think its possible clip ons would work on this bike? Nice vlog dude keep it up!

[@JstnRides]

M Thomson thanks man! Theres few aftermarket handlebars out there, you just to know the right one you need. I’ve seen a some XSR’s with clip ons and its look good to be honest, but its not for me thou.

[@jla9128]

Hi mate! The aesthetics is spectacular with this new handlebar!! Please, one question, why is it necessary to drill the handlebar? Thanks in advance!!!

[@JstnRides]

Thanks for stopping by, drilling a holes are to to secure your controls to your handlebar. Each controls have a pins that goes into the hole so it wont rotate.

[@JstnRides]

Some are too scared to drill holes so they ended up cutting the pins and hope for the best.

[@user-zb5dl5px6e]

Hey,why did you drill the handlebars with the drill? Didn't you also have to change the clutch and accelerator cables?

[@JstnRides]

Yes I used a drill, didn’t change the cables.

[@JstnRides]

Holes are to keep the controls from twisting

[@RC-co4zc]

Can I ask if xsr700 can be replaced with a 720mm length handle? THANKS❤️❤️

[@JstnRides]

720 might be a little too short. You need to consider your cables.

[@opcb9815]

I recognise those streets! ;) with the lower bars do you get any interference from the switchgear on the tank?? Steering lock still work fine? I only ask because on my stock bars there’s not much clearance at full lock. Thanks

[@JstnRides]

Pm Pm hey man! Lower bars works fine for me. I can take u-turn comfortably and switch gear on the bend easily. The actual bike has a riser and I just kept it with the new bars. Ride safe! ✌🏽

[@user-zw8sq7iz4k]

Do you have a modified your throttle line make smooth?

[@gregsanford3848]

What is name of the song please

[@scottomotive]

Hey are you able to still remain pretty comfortable on longer rides?

[@JstnRides]

Yes, theres a minimal change in the position at least for me and big difference is looks.

[@Bramslootmans]

never knew handlebars where just attached with 4 bolts haha

[@JstnRides]

hahaha.. bit scary of think about it really.

[@Bramslootmans]

I want to change the handlebars on my xsr 700 aswell, do yours still hold up to ur expectations?

[@JstnRides]

@@Bramslootmans theres a lot of handlebar out there. I wanted it to be lower it a lil bit for better handling and looks.

[@alex_rodriguez777]

Can I ask what year your bike is? I don't think we get the XSR in that blacked out colorway, bummer

[@JstnRides]

Alex Rodriguez hi! This bike is from year 2019. This colour is widely available all over Europe. I dont know why they dont want to distribute this to all continent.

[@stephenhenryescote8150]

Hi Sir what is the size of the stock handlebar? I want to buy a same size of to put it on my xsr155 😅

[@JstnRides]

Width 770mm . Dia.: 28.6 mm in clamping area, 22.2 mm at the ends. Let me know how it goes man! ride safe

[@louislin5341]

How do you change your meter stand? I had one but it will stuck the throttle cable.

[@JstnRides]

Louis Lin what you mean with meter stand? Speedometer? If thats what you talking about I purchased a relocation kit. I’ll try to find where I got it then I’ll come back to you.

[@dudestoked]

Any reason to choose the LSL Superbike instead of LSL Superbike Low?

[@JstnRides]

Depends how low you can go and you need to consider clearence issues with the bars, maybe hitting the fairing or tank.

[@dudestoked]

@@JstnRides thanks for the quick reply man! How close are yours to hitting the tank? Think another 0.5"-1" would be too much?

[@JstnRides]

@@dudestoked This one is lower than my OEM bar,m but theres no issue when it cones to clearance.

[@martinssergio78]

Hi, which brand/model did you choose for Speedometer reallocation?

[@JstnRides]

Sérgio Martins jvbmoto! ✌🏽

[@TheBalauru27]

Hi there. How did u solve the issue with the cable slack, now that the bars are lower? Thanks!

[@JstnRides]

Electronics cable are fine, I only changed clutch cable to a shorter one.

[@John-pe7ru]

What is the size of it?

[@JstnRides]

Dimensions approx. 770w x 65h i think. Dia.: 28.6 mm in clamping area and22.2 mm at the ends

[@bmwm3man]

What bar end mirrors do you have now?

[@JstnRides]

amazon bar-end mirrors, nothing fancy.

[@bmwm3man]

@@JstnRides loll thanks. Look like rizomas