xTool M1 Ultra Review / M1 Ultra Projects - See What This Laser Can Actually MAKE! Beginner's Guide

[@SarahNenniDaher]

Check out the xTool M1 Ultra bundles here: www.xtool.com/products/xtool-m1-ultra-the-worlds-first-4-in-1-craft-machine?ref=FOa8dfQBE0X30&

[@cito.brosas384]

They can send in Oman when I order?

[@carolwaller9605]

I like the fact it incorporates the colour printer, cutting blade which is useful for thin acrylic, materials etc and the option to engrave using foiling or even just write text with the pens. I have the F1 already which is fine for cutting and engraving small items but I like the idea of the larger footprint and the additional crafting features. Thanks for a great review ☺️

[@SarahNenniDaher]

Thank you, Carol. It's a fun machine- the breadth of options means I won't "grow out of it" like some. Thank you for watching.

[@fistfullofbeer5763]

This is really a great one stop shop to get started with the M1 Ultra. Covers so many areas in a clear yet concise manner. Awesome job!

[@SarahNenniDaher]

Thank you so much. I definitely want to show people what they could get for the dollars they spend. :)

[@astoriarosewood5135]

Best review I’ve seen so far! Thanks for your efforts! 😊

[@SarahNenniDaher]

Thank you so much. I do try and give people a glimpse of what they can DO with it instead of reading specs or spouting off measurements we can read on the website. :)

[@OrlandoBelletti]

I didn't know where to start... you solved it! 🙂 very good video, very good advices! Thanks

[@TawfikWDajani]

Thank you ❤ you answered all my questions to buy it or get another xtool machine.. although I like a lot of the features in it but now i know for sure it’s not for me.. i already own the F1 and D1 machines.. i was between this, the P2s and the S1

[@SarahNenniDaher]

Oh, that's a hard decision. I love both of those but with your other diode, that P2 is a significantly different, yet awesome, beast. :)

[@GamingWithURO]

Got my "all in one bundle" coming this week. Thanks for this video. Of all the ones ive seen so far, you show the use of this thing the best of all of them. Thanks!

[@SarahNenniDaher]

Congrats! It's definitely a fun little addition. :) Today I'm working on some printing use cases to see how I like them.

[@GamingWithURO]

@@SarahNenniDaher thanks I'm excited. I have 2 Circuit Explore Air 2's I use here and there. I'm thinking for how little I use them... And the issues I've had with print and cut with them, that this might replace them and give me all the benefits of the laser all in one. Beside the speed, this seems like it might be more like a Cricut Maker (lite) than an explore so that's a bonus. 🤣👍

[@ValYo0623]

I ordered the 20W all in one bundle so it has just about everything! I'm so excited and cannot wait to get it! I am excited to laser some tumblers, as well!

[@SarahNenniDaher]

WOW, that's awesome and congratulations! I have the RA2 for another machine, so perhaps I'll try it with this one.

[@kooldesign4u]

I asked in the live they just had about a sublimation print module and was told by a viewer sublimation was impossible but I know it isn't a problem. Fingers crossed for it.

[@SarahNenniDaher]

Oh, fingers crossed, indeed. So tired of my hacked Epson.

[@deonagood9464]

My husband won this machine. My question is. Can you cut sublimation acrylic & mdf sublimation board?

[@vaalrus]

Does this laser require net access to 'call home' in order to work, or is it complete controlled locally?

[@SarahNenniDaher]

It has to send the file from your device to the machine. That can happen wired or over Wi-Fi. You can work offline (unless some lasers), save the design file, and then work it later, but you have to have a connection to the machine in order to do that.

[@Dee_B23]

Hi Sarah! It's been a bit. I watched the Launch of this last night, it looks amazing. Thank you for demoing it. Hubs got the F1 a few months ago and it's out of the box but have not used just yet...soon...lol Take care!♥

[@SarahNenniDaher]

Oooh, that's one I don't have (yet). Haha

[@melissadraka4340]

Hi- this is a great video. Can I paint a sign white and then print only in all black? Is it vivid or will it have those printed lines in it? Thank you!

[@SarahNenniDaher]

I'm so sorry, just seeing this now. I would have to test that because there is no black, so you're layering all the colors on top of it. I think it would look muddled, maybe?

[@damienhick1647]

Great video thanks. Given you have a few of these machines, which would you recommend for Acrylic cake toppers - about 3-4mm thick, various colours? Thanks

[@SarahNenniDaher]

For cake toppers, I would absolutely do a CO2 laser (I recommend the xTool P2 but there are others).

[@damienhick1647]

@@SarahNenniDaherawesome. Thanks for that. Much appreciated

[@menelikesisay]

Hello for Mac which software you used ? Thank you

[@SarahNenniDaher]

I got the one without the M1 chip for iOS. If you have the M1 chip, you have to use that download.

[@carolwaller9605]

Can you use this machine with Wi-Fi only instead of using the usb?

[@SarahNenniDaher]

You can use it with WiFi exclusively after the initial set up with the USB.

[@carolwaller9605]

@@SarahNenniDaherdarn, I’ve only got an iPad so I guess it’s a no no for me as I dont have an option for connecting using the usb, such a shame as I’d love this machine 🥺

[@moosedawg71]

Your #1 want was exactly the same as mine. They hint there is more coming, so my fingers are crossed. Thank you SO much for this video, it was SO helpful. I just got my M1 Ultra and while I know my way around a Cricut, I was overwhelmed at all the settings and features. I kept wondering how in other videos people seemed to just know what settings to use for different materials and couldn't figure out how they knew this stuff other than trial and error or experience. Needless to say, I've subscribed to your channel 😊. BTW, the 'possum was HILARIOUS!

[@SarahNenniDaher]

This comment just showed up for me (ugh, sorry for the late reply). YES I really hope they come out with it and honestly, I don't even care if it's only like 90% of what I use currently - it would be so fun to play with.

[@jaekrieldgx_71]

Hi there. Just saw your video - very informative - very helpful. I do have one question if you can help me. I am looking for a multi-function Laser and cutting machine - AND Embossing. I know that the M1Ultra can emboss leather - and can do foil embossing - My question is - can the M1Ultra emboss Foil into LEATHER - or even faux leather. My main goal is to have a machine that can do multiple tasks - but I'm really looking for a machine that can emboss foil into leather. Such as - a hardcover book that has 'gold foil embossing' - if that makes sense. Do you think or know if this machine can do that? Any feedback/opinions/experience you have regarding that particular task that you can give me would be greatly appreciated. Thanks in advance - love your channel. You have a new subscriber. ~ Jaekriel

[@elizabethsagarminaga4281]

I need a machine that would cut all acrylic which one do you recommend for that.

[@SarahNenniDaher]

That would be the xTool P2 or another CO2 machine. I have the P2 and some videos on it. I’ll answer any questions you have because I really, really love that machine.

[@realronkan]

How big pieaces can you put into xtool m1 ultra?

[@berryandpine]

The material it calls for on both the honey on and the baseplate is 12x12 inches (30+mm). As for the depth, I have to measure when I get home (I have the riser base).

[@MrGillard]

Have you used alternative filters on the connection end of the exhaust? These things do not last long. I ordered replacements but looking for options.

[@berryandpine]

Not yet but, theoretically, couldn’t we just buy some cotton filter and cut it to size? That might be a great question for support.

[@MrGillard]

@@berryandpine I just ordered an aquarium filter sheet. Will see how it goes. Also support just referred me to ordering their replacements.

[@no-hx6li]

That's what I was thinking,or the same material the filter is and cut it to size​@@berryandpine

[@no-hx6li]

I'd love to know how it went? Bc it seems like you could cut your own filters lol​@@MrGillard

[@MrGillard]

@@no-hx6li The alternative files work well.

[@australianbackpacker625]

Hello can this machine engraved on plant leaf

[@SarahNenniDaher]

Oh, now that I've never tried. I'm traveling so I can't put one on there right now but I'm curious to try on a green leaf that still has moisture.

[@australianbackpacker625]

@@SarahNenniDaher if you done it tell me please. I am in Australia and i want to buy this for leaf

[@pik800pik5]

Hi I'm completely new to craft machines and I'm really struggling. I build paper models from pepakura (.PDO files) and want to use this machine to cut out the pieces for me. I can't find any vids specifically for this. I can convert my .PDO files into .SVG but they import into XCS with so many lines and boxes and layers they're a mess. The closest thing I can find is Print and Cut stickers but cut on the line so zero offset. Any advice or direction you can point me in would be a huge help..

[@SarahNenniDaher]

Wow, that art form is so cool! As for the PDO files, they would have to be converted to SVG and then placed in a vector editing software to unite/combine vs group. I use Adobe Illustrator, but Inkscape is a free option. XCS will import each element, not layer so that you have maximum control. The good news is that they can be either edited once within XCS, saved, and stay grouped for multiple uses. The bad news is that there is no program (aside from a vector editing program) which will be able to import without the separation of elements.

[@pik800pik5]

@@SarahNenniDaher Do you have a tutorial for Adobe Illustrator or Inkscape? It's a lot of new terms and I'm having trouble searching for exactly what I need. As for XCS, I defintely feel like I'm trying to run before I walk and a few beginner projects might be a good place to start. Thanks for your help! This was a great intro video.

[@SarahNenniDaher]

@@pik800pik5Thank you ❤ I don’t have a tutorial, but if you want to send me the SVG version, I can try to record a video for you next week on how to unite it in both XCS or Illustrator

[@SarahNenniDaher]

@@pik800pik5 not sure why my comment is not showing, but you can email me the SVg file and I can do a recording of how to get it ready in Illustrator and XCS if you’d like.

[@pik800pik5]

@@SarahNenniDaher That would be great! I'll send it now

[@OrlandoBelletti]

@SarahNenniDaher I printed with inkjet module but mine doesn't put the cover cap after the print. Is it a manual setting. More, it goes always onto the same point to "clean" the printing head...

[@SarahNenniDaher]

Yes, it will always finish the print at the same position (front right) because that is where you should put the ink pad / cap holder. Are you putting the little flat piece with the ink pad and cap holder in before printing?

[@OrlandoBelletti]

@@SarahNenniDaher my module doesn't go there. I followed what you did... I don't know. 😥

[@SarahNenniDaher]

Okay, do you have the baseplate in? If so, the printer ink pad and cap holder slides onto the baseplate handle. If you're using the honeycomb, go to the official M1 group on Facebook, look for Se'an Farris' post on the hack for placing it on the honeycomb.

[@OrlandoBelletti]

@@SarahNenniDaher no honeycomb and yes, I placed the holder in the right place (as instructions say). I'll check well... thanks a lot for the answers! Too kind! 😊

[@createinspain]

I have the S1 and love it - but I have to correct you on something. The riser in the US has a front opening, the ones in many countries, the EU and UK, for example, do not and do not have the multi shelf capability. It is not allowed for safety reasons. Other than that, yours is the first video I have seen, where the user has been so honest in what it will or won't do and who it is good for and who is not going to gain anything from buying one. I would not recommend a 10W because I think it would be under powered and I agree that the honeycomb is a good idea. Also a good idea is the air assist. From my use of lasers, I also suggest getting a silicone mat to place under work, on the base, where possible, as it will collect the debris and allow easy clean up (specially if a closed front riser is used). This is not the sort of machine that will replace a plotter for people bulk making stickers, or those who want to do large vinyl cuts or make big projects but I do think it will be a fun machine for many. For those who don't have the funds for it and just want to try a 'baby' laser, there will be a lot of M1 machines on the second hand market very soon!

[@SarahNenniDaher]

Great points! I have (primarily) a US-based audience, but I'll try to do better on that in the future. Thank you. I didn't do stickers for this reason (though will try them later). Anyone who has a business with stickers is much better off printing on a high quality printer and cutting on a plotter but I'm curious to see how vibrant I can get on the paper because the wood looks great. Thanks for the tip and for the reminder that the world is a small place.

[@astoriarosewood5135]

Thanks for this! Can you advise why you don’t think this would be as effective for regularly cutting stickers? It seems to be able to cut as well and as quickly as something like a Silhouette to Cricut. Or do you think the software is what makes it the lesser choice?

[@SarahNenniDaher]

@@astoriarosewood5135 Actually, the blade is comparable (though it might be a bit slower than a Cricut Maker). For me, it would be the printing. Those with sticker businesses will likely want to keeping using a much more robust system for printing (like a Pixmo Pro). For those of us who want to print our own business stickers as a freebie thank you gift or magnets for advertisements, this is more than capable.

[@createinspain]

@@astoriarosewood5135 The speed, which is not likely to be as fast as a normal printer; the print quality (XTool said was not as good) and that you can't do a continuous long sheet and then separate them. OK for domestic stickers but not so good if you have a business selling them.

[@mixedpopcornproductions9692]

I didn’t know this about the riser in the UK so that’s good to know. I have seen a rise in M1 machines on marketplace this year and I think it because of the power, so 20W is definitely the way to go. I will be purchasing the M1 ultra in the future maybe around Black Friday 🤞🏾🤞🏾 all the features and the size suits my needs. I’m grateful for this tutorial

[@KarenJones-l5l]

Hernandez Ruth Young Jessica Miller Anthony

[@creature1971]

The Xtool M1 Ultra will cut acrylic. You are giving partially false information. Clear and certain colours it will not cut. But making a blanket statement that it will not cut acrylic, is wrong. Read the specs and do some research. We have one and it cuts opaque acrylic beautifully.

[@SarahNenniDaher]

Never said it wouldn’t cut acrylic AND even provide examples of acrylic pieces both engraved and cut with this laser. Not sure what you’re getting at here but if you watched it, you’d discover I said that it a) doesn’t cut all colors but does some well and b) if you’re looking for *primarily* acrylic work, this isn’t the laser for you.