XTOOL S1 40W Laser Engraver Review for our

  Рет қаралды 1,298

NuKraft Workshop - Woodworking & Furniture Rehab

NuKraft Workshop - Woodworking & Furniture Rehab

Күн бұрын

Пікірлер: 25
@RedProg
@RedProg 24 күн бұрын
Fine looking machine. 😁 "Lay-ser"
@NuKraftWorkshop
@NuKraftWorkshop 24 күн бұрын
😂😂. So far I’m impressed… I really don’t know how much I will integrate it into my day-to-day activities but it definitely will have its place
@markgorton5865
@markgorton5865 23 күн бұрын
Should be a nice addition to your shop. Look forward to seeing what you do with it.
@NuKraftWorkshop
@NuKraftWorkshop 23 күн бұрын
Thanks Mark! Not convinced that my wife won’t be using this more than I will 😂
@lauratejedaramos5039
@lauratejedaramos5039 23 күн бұрын
I've been looking at lasers. Thank you for this review. Very helpful.
@NuKraftWorkshop
@NuKraftWorkshop 23 күн бұрын
No worries at all and thanks for watching as always. Truly appreciate you taking the time to leave a comment like you seem to always do 😂 🤟🏼🤟🏼
@davidmata5080
@davidmata5080 24 күн бұрын
WOW! "Lay-ser" How fancy! That was a very enlightening demo of the product. Though it still seems like magic. Thanks for demo. Certainly something to think about for the future.
@NuKraftWorkshop
@NuKraftWorkshop 24 күн бұрын
It’s a different type of machine than I’m used to… that’s for sure
@davidmata5080
@davidmata5080 23 күн бұрын
@@NuKraftWorkshop Good for you and congrats on the success of your channel!
@NuKraftWorkshop
@NuKraftWorkshop 23 күн бұрын
🤙🏼
@TheRusticCraftEmporium
@TheRusticCraftEmporium 23 күн бұрын
Great review! Nice to watch a review with down to earth opinions rather than 'sponsored' opinions. This particular model is something that I am working towards purchasing. A long way off, but I'll get there 😂 Thanks again, Tim! 👍🏻
@NuKraftWorkshop
@NuKraftWorkshop 22 күн бұрын
You’re very welcome and good luck… I think my wife is going to wind up using this more than I do, but it will definitely be integrated into the shop
@TheRusticCraftEmporium
@TheRusticCraftEmporium 22 күн бұрын
@@NuKraftWorkshop Awesome! Look forward to seeing the additions 👍🏻
@Chadelon
@Chadelon 24 күн бұрын
That's a really cool laser! It'll definitely help you make some cool pieces for your Etsy shop!
@NuKraftWorkshop
@NuKraftWorkshop 24 күн бұрын
It should definitely help… If I can learn how to use it 😂
@andygfd1839
@andygfd1839 23 күн бұрын
Very nice! Will be following the progress on this. I noticed at a few of the local craft fairs it’s really important to be able to do personalization to be competitive.
@NuKraftWorkshop
@NuKraftWorkshop 23 күн бұрын
I agree and if I’m being honest, that’s probably the main reason I brought this into my shop. I want to be able to personalize some items on my Etsy store and I also want to be able to edge my logo into items I am selling
@jeffp5991
@jeffp5991 24 күн бұрын
Hey, Tim. I think a laser would be great for personalizing, but it will be a while before in the market for one. I didn't see the link to the xtool site ... did I miss it or did you? 😅
@NuKraftWorkshop
@NuKraftWorkshop 24 күн бұрын
They asked me to get the video up by the ninth but I haven’t gotten my link yet… I appreciate you asking about it but as soon as I get it I will add it to the description. I’ve played with it a couple times and I think it’s definitely something that will get tons of use, it’s just not going to be our main production process. I like my saw and my planer and my router table a whole lot more than a laser 😂😂🤟🏼
@RayandSandysWoodworking
@RayandSandysWoodworking 24 күн бұрын
Wow, your in hog heaven now! Got you a laser!
@NuKraftWorkshop
@NuKraftWorkshop 24 күн бұрын
Not sure yet 😂😂. I’m a slow learner on computer stuff but so far, so good!
@BrandonCabanillas
@BrandonCabanillas 24 күн бұрын
Go, longhorns... I've been thinking about a laser engraver, but I want a router also. I've been eyeing the alienfox laser engraver/cnc router. I'm going to have to save about 1 year, more or less. But first i need a planer..with spiral or helix . Not sure the difference. I've been youtubing and also a drill press. Any thoughts?
@NuKraftWorkshop
@NuKraftWorkshop 24 күн бұрын
As far as an automated machine like a laser or a CNC… Like I said in the video, I’m not going to integrate this into our daily use. This will be something that we can use occasionally for specialized projects. I will probably use it more to etch my logo on the back of my projects when I sell them than anything else and I probably would not have spent the money on this… Glad they offered me the product in exchange for some promotion through my channel. I would highly recommend getting a good planer and a joiner is my next purchase. If you have a lumberyard in your area (not a big box store) it is so much cheaper to buy material that is not finished on all four sides and finish it yourself with your planer and joiner.
@ALFREDDUHON-lq9dp
@ALFREDDUHON-lq9dp 23 күн бұрын
Comment
@NuKraftWorkshop
@NuKraftWorkshop 23 күн бұрын
Thanks 👍🏼
The xTool M1 Ultra Hack for Amazing Color Prints on Wood + More
21:49
Laser Engraving 911
Рет қаралды 8 М.
xTool S1 Infrared Module - Worth the money?
15:34
GT Woodshop
Рет қаралды 2,9 М.
Tuna 🍣 ​⁠@patrickzeinali ​⁠@ChefRush
00:48
albert_cancook
Рет қаралды 148 МЛН
40w diode vs 40w Co2 laser
15:18
Voeltner Woodworking
Рет қаралды 152 М.
Best Enclosed Laser Engraver of 2024 - xTool S1
17:25
Mark Gutierrez
Рет қаралды 5 М.
Are Woodworking Craft Shows Worth It? | Here's What I Learned...
9:00
Ben Grimsley Woodworking
Рет қаралды 7 М.
10 Tools That Will HUGELY Benefit Your WORKSHOP
20:22
Start Making (Woodworking)
Рет қаралды 88 М.
3 Levels of Laser Engraving - Beginner to PRO
14:00
Make or Break Shop
Рет қаралды 61 М.
The ALMOST perfect laser: The xTool S1 Laser Review
18:43
Make or Break Shop
Рет қаралды 56 М.