yamaha fz1 exhaust mod NOT A SLIP ON..

[@RonaldoElias]

I used your idea but in a simpler way, I removed the lid and made ​​two holes and got the same result. Thanks for the video.

[@hawki07]

Can you send a picture where you made the holes

[@RonaldoElias]

Jacob John Yes. Me send me your e-mail. My: [e-mail]

[@Kaandar]

Ronaldo Elias Hi Ronaldo. can you send me the pictures as well?

[@hawki07]

Ronaldo Elias Hi Ronaldo, I tried what you suggested. But making the holes alone made no difference.

[@nosesidaba]

Hi, could you send me my photos too? [e-mail] Thank you

[@sethclark7843]

I took the cap off and drilled four holes ground out the outside of the main pipe that comes through the cover stuck a Sawzall down in it and cut it off and then cleaned up the edges so there's a giant hole, spray painted it so it looks clean underneath, put the cap back on.... done... thank you Ronaldo I appreciate your comment on this so I could spin my own ideas on it :-)

[@robertwallitsch1255]

what a sound difference. that now sounds awsome!

[@vuly7745]

Do we need re-map after modified like this bro ?

[@howardrmz1]

Did you put the exhaust cables back on? When riding bike does it backfire any when letting off gas? Just curious.

[@JwallzMTB]

Yeah, it backfires alot

[@howardrmz1]

thanks, I drilled my end cap several times with 1 inch bit. It sounds real good with no backfire. Ran the rpms up let off sounds good.

[@JwallzMTB]

yeah I did exactly what this guy did, but I ended up just buying a Yoshi, its like 20 pounds lighter for sure!

[@JwallzMTB]

Jerry Howard

[@Tigadee00]

Wow, job well done! Sounds like a proper powerful bike now!

[@stephenmwyatt2]

Same thing, is to simply remove the muffler and get a coffman or gp shorty pipe. This will lean the bike quite a bit but you will be cool if you do not exceed 220 degrees F.

[@pioneerradio5042]

Sounds way better

[@kousinkoolaid]

Heyyy so I'm trying this on my fz8. was it easy for you to get through the inner metal? I can cut through the outer metal easy, but the inside is hard as F*c&

[@BelowZero]

Great job man!

[@fredrodta]

Looks very nice, well done, sound very sexy.

[@col8981]

And the point is?

[@JwallzMTB]

heck yeah

[@ЕвгенийВоловидных-и6е]

cooool!!!!!!!!!!!!!!!!!!!

[@Geeza65]

good job sounds better! its still an ugly muffler though!

[@primokona]

Cant Understand.. why you guys cant work on your bikes in the light.. SUNSHINE folks it sheds some light on your subject

[@sr-sr592]

go to kzbin.info/www/bejne/ooSvk6WHoqatpqs for the modded sound

[@jonathanchiasson5145]

Did exactly the same as RONALDO

[@hawki07]

And can you please post the results and share the link

[@jonathanchiasson5145]

Well i dont have this can anymore but it doesnt really get to its value. Delkevic 14inch can is thebcheapest and gruntier exhaust you can have on the fz1... Its also pretty lite. Not to expensive either.

[@Frank_Hwhite]

Just trash that heavy thing and buy a danmoto for 200 bucks.

[@retronaut4398]

Why there is no smoke coming out and where is that high pitch engine sound of FZ1 gone? Also wheel is not spinning while accelerating. Are you full of bullshit?

[@mikrus22]

Retronaut ... no I'm not bs... here ... if you got smoke coming out of your exhaust...maybe there is something wrong with your engine... I will make another video.. just for you of bike running and will put it in gear .. so you can see spinning wheel as you wish...