ATV Axle Drive Shaft CV BOOT Replacement - Ripped Boot on KING QUAD 750

[@DirtyJakTheDustyBean]

Just ripped this boot yesterday and was debating taking it in or doing it myself. After watching your video gonna do it myself, thanks for a very well done video.

[@MidNebraskaMotorsports]

Awesome. Happy to help!! Let us know if you have any questions. www.midnebraskamotorsports.com/

[@cancerous_panckake2210]

Wish I had found this video when I actually needed it a few weeks ago

[@MidNebraskaMotorsports]

Sorry to hear that! Check out our website if you need parts or tools in the future! www.midnebraskamotorsports.com/

[@SilverHawkk]

WOW!!! This is exactly what I needed. A great quality video, that shows the details of each step and explains it all perfectly. No BS, just gets to the point and doesn't waste my time. Will definitely watch your other videos to do more in-depth work on my 2007 KingQuad 700. The King and I will appreciate it! ;) You just got a well-deserved Like and a new subscriber!

[@markbell7573]

very well done video, good camera work and thorough explanations

[@MidNebraskaMotorsports]

Happy to help. Thanks for watching and the comment. Let us know if you need anything: www.ebay.com/str/midnebraskamotorsports

[@martinfrye6405]

Excellent video. Very clear and concise. Saved me a lot of downtime, as well as money. Thank you!

[@bezalelex31]

Super informative! Keep them coming!!! 👍

[@MidNebraskaMotorsports]

I sure will. Have you subscribed to our channel? Let us know if you need anything else. Check out: kzbin.info/www/bejne/qaCvnIqrqJeEb68

[@theegronk]

thanks bro been fixing up a couple of old quads and your vids are real helpful.

[@MidNebraskaMotorsports]

Love to hear comments like this. Thanks for watching! Let us know if you need parts for your rebuild: www.ebay.com/usr/midnebraskamotorsports

[@eviloctober]

Really thoroughly detailed information like this video thank you

[@MidNebraskaMotorsports]

Appreciate the comment!! Have you watched our other king quad videos?

[@bettyfinder9129]

You are doing a great job explaining the project thank you

[@MidNebraskaMotorsports]

I appreciate that! Hope you find more on our channel! More on CV boots coming up in December. kzbin.info

[@thomashagin8692]

This video is perfect, thank you! But I have one question, can reuse the bands that are on it already?

[@MidNebraskaMotorsports]

unfortunately on this style the bands can't be reused and be tight enough to hold the grease in and dirt and grime out. Thanks for watching

[@normgreen4878]

Great video. Totally unrelated question for you. My 96 king quad eats starter relays, I would like to have just a toggle switch to turn it off and on. I only use it on the mini farm. Can that be done I don't need lights or any thing like that. Thank you for your help in this.

[@MidNebraskaMotorsports]

Oh yea, easy process. Just have to pull the speedo pod and get that switch pulled out. You can just cap off the light wires and use the on/off wires. Although, I'm curious how you think this will fix the relay issues. Talk to me about your thought process there. Thanks for watching Norm.

[@henryconnor4917]

Excellent video - Do you have a video on replacing the cylinder top end?

[@MidNebraskaMotorsports]

I’ve got some motor videos coming up!! Keep an eye out for them. Thanks.

[@dpfrnqz671]

Thank you for your video, very helpful and informative, especially about the grooved coupling possibly causing clicking noises. I suspect this to occur even if boots look good. Happy New Year.

[@MidNebraskaMotorsports]

Appreciate the comment!!

[@ericjohnson9080]

Great vid! No need to replace the outer boot in this case?

[@erichunter14]

Are you suppose to grease up the teeth on the wheel end of the shaft and/or the smooth surfaces inside the knuckle?

[@parkerd.2158]

E H yeah that’s what I do, it won’t hurt it, it is good for protection from water so it will last longer

[@Smalltechguy]

I've purchased these tools a few years ago after watching your video. I've not had any boots replacements since but I'm doing a caliper swap instead of trying to pull these pistons out of the Kawasaki Prairie 360..It's a 2005 model. So if you could make a video on that portion that would be awesome

[@Mizdarrr]

I just noticed that my two inner boots on the rear axel are completely ripped, what causes this and is there a way to avoid it happening again?

[@stephenharrison5102]

Do you need to replace it a certain way like is there a top and bottom or a pacific way it need to go back in ?

[@freezerburn04]

Great vid, big help for me and my king quad 300. A++ Thank you

[@daveautsolief9312]

Great job on detail steps, thanks

[@iwin1833]

Great video saved me a bunch of money. Thumbs up and subscribed thanks dude

[@bobcam818]

Great video 😊

[@MidNebraskaMotorsports]

Thanks Bob!! If you need more helpful tips, check out: kzbin.info/www/bejne/jmGklXmuoK-chck and if you need parts: www.ebay.com/str/midnebraskamotorsports. thanks for watching and the comment.

[@Jimmie572]

Is it the disassemble procedure for the outer boot?

[@Axefiend777]

Thank You for this video! Cheers!!

[@swilford1]

Thanks for the post. I'll be back........

[@donaldfuller5041]

I found a clip like that in my driveway where the wheeler is primarily parked. Is there another clip used like that on the King Quad? All my boots are intact and it only has 39 miles on it.

[@KB-yb7vy]

Awesome video big help

[@MidNebraskaMotorsports]

Glad to hear! Thank you for watching and the comment. Check out our website if you need parts! www.midnebraskamotorsports.com/

[@douglascatron9073]

Great vid, Thanks

[@MidNebraskaMotorsports]

Awesome. Glad you liked it. Have you hit that subscribe button yet? Let us know if you need anything. Plenty more videos kzbin.info/www/bejne/qaCvnIqrqJeEb68 and parts available. www.ebay.com/str/midnebraskamotorsports

[@lloydmeyer6929]

Can you confirm if it is a 1 3/16 or 1 1/16 castle nut holding the hub on?

[@SkIttle2The0]

Really thurough video, I have four ripped boots, on the rear inner I can move the cup there up and down a decent amount.. How can I diagnose bad CVshaft without driving the wheeler? I ask because my clutch is messed up, if I hold up on the shift pedal it goes fine, what does that mean?

[@SkIttle2The0]

You got it I'll tell my friends about your channel too!

[@koreydawson7643]

Hi just need a bit of info i have a king quad 700 2005 both my rear shafts have a bit of movement up and down is it normal or are bearings in diff shot?

[@MidNebraskaMotorsports]

Going into the diff? Or in the actual joint itself? No clicking? If the joint is bad, it will make some serious clicking noises. Let me know what you find? Thanks for the question! Hit the subscribe button as we have a lot more videos coming out on this machine. Also, check us out at www.midnebraskamotorsports.com/

[@johanpotgieter4318]

Thanks

[@MidNebraskaMotorsports]

Heck yea. Happy to help!

[@cavedogjr9]

Hi I just ordered both the front left and right cv axles. Are they interchangeable or is there a way to tell the left from right side?

[@cavedogjr9]

@@MidNebraskaMotorsports I bought them off ebay it's a Chinese no named brand. I think I'm just going to return them. They were under 100 for both

[@cavedogjr9]

@@MidNebraskaMotorsports thank you for your response and your amazing videos

[@daltonhaines9509]

I took my hub assembly off. the bearings inside of that do, they go bad? cuz I'm hearing a clicking when I turn to the left as I'm moving would that be inside that assembly or would that be inside my axle? bearings

[@scoobiedoo96]

Is there not a torque value for that axel nut?

[@buckshotjoe1]

excellent video

[@natelidge8470]

Great Job!

[@vicfixer378]

Do I need the clamp tool or not ?

[@keeganfoster1792]

No not really be a handy thing to have but not mandatory

[@christopherburnett4455]

Any way i can contact you about my fourwheeler? I need some help

[@edithsmith2901]

Excellent

[@skylercutsforth8595]

How do I know if the joint is still good or not? Bought mine with the boot already ripped and I don’t know how long it’s been like that...

[@ryant8430]

@@MidNebraskaMotorsports I just received a brand new stock front axle for my KQ 750 and the outer joint catches sometimes when I move it around ... you're saying my brand new $300 axle is defective?

[@lesawmiek3305]

Super

[@권용삼권용삼]

좋은정보 감사합니다

[@MidNebraskaMotorsports]

WHAT?? Hit the subscribe button for us and we can get one posted at some point for you. Thanks for watching. Let us know if you need parts or tools for the job. www.midnebraskamotorsports.com/

[@Robert08010]

Wouldn't you think if one boot is ripped that the other one is probably close to the end of its life? I would think if I had to replace one, I should replace them both, no?

[@Robert08010]

@@MidNebraskaMotorsports The boots on my 01 Honda Forman are full of tiny cracks like dry rot. I just assumed they all look that way after a few years of use.

[@jordanlittle5391]

@@Robert08010 I find in my atv the boots are only like 20 bucks cheaper then the whole new axle so it's not worth it to repair

[@raychristopher9509]

The front CV boat

[@billpeet5556]

The balls seam to fall out every time, be nice if you showed how to put them back in, never figured out how they fell out

[@hunterthelord]

YOU PUT THE STRAPS ON BACKWARDS!

[@MidNebraskaMotorsports]

Copy that. Thanks for the comment and for watching. Let us know if you have an questions! Let us know if you need parts: www.ebay.com/str/midnebraskamotorsports

[@tombest1495]

in fact im tired of seeing democraps getting away with their illegal corruption

[@MidNebraskaMotorsports]

800 ft above see level. I would leave your carb on stock factory setting. Thanks for the comment! Let us know if there is anything we can help with. Check out: kzbin.info/www/bejne/jmGklXmuoK-chck for more tips. And: www.ebay.com/str/midnebraskamotorsports for all your parts.