Yamaha MT-10 (2022, 2023+) Fender Eliminator Install Video - Vagabond Motorsports VM-YM110

[@user-re1cv5ue1b]

Extremely good product. Love the fact that it uses all the stock lights. Took about 1.5 hours to install going slow. Looks amazing. thank you for the install video.

[@henryabel4776]

Bought the kit because the video was extra good. And the kit looks like it came on the bike, uses the stock signals and has no exposed wires. Super happy! Makes the bike look so much better. Took me about 2.5 leisurely hours, but worth it.

[@smcd5772]

Just finished mine. Solid, well-made kit. Unfortunately, I snapped one of the spacers trying to ham-fist it on but made it work since they only function to take up a gap. You can be rougher with the turn signal stalks than you might imagine. They are a tight fit into the eliminator bracket but will go with enough persuasion. I gave up on the final two smaller plastic push rivets. Maybe someday I'll try again. For the nut partially blocked by the brake light connector, dab a bit of grease onto the nut, stick the nut into your socket which will hold the nut and then make your approach with your socket while pushing the connector off to the side. Seemed to work pretty well. Definitely recommend if you want to keep oem lighting.👍

[@VagabondMotorsports]

Thanks for the message!! If you ever end up needing a replacement spacer please let us know and we can ship some out.

[@linglingbraps]

Just wanted to say this was an excellent video, down to the pain in the ass rivets in the corner of the undertail upon final assembly. You actually touched on every snag I came across in the install. The kit is nice, though the spacer rings provided can crack if you’re not extra careful. Mine did, but they still function the same and you can’t see it when installed.

[@JonathanGurgul]

I just ordered it! Exactly what I was looking for using oem gear.

[@JonathanGurgul]

looks great on my bike, fast shipping too! Thanks. I love the attention to detail in the little things!

[@masonpettner8833]

Saved me a a lot of time, thank you.

[@simonm444]

Loved the vid, real good wreslemania action.

[@antsolo9149]

Fucking lifesaver I thought those resistors was a cable that went all the way down to the harness. I about cut off the stock blinkers by the wire.

[@Abra_Ka_Dabra_008]

Was going to buy Yoshi kit but bought this one for the video itself. Great job! 👍

[@VagabondMotorsports]

Awesome! Thank you! I hope you are enjoying your moto!!

[@xdrive8860]

I'm exhausted just watching this video let alone doing the job.

[@user-hf8ie8mf3n]

Man this was so much simpler with the first gen bike. I get why, but why? 😵‍💫 Engineers don’t have to work on things…

[@balabanski]

Make delivery for Bulgaria.

[@przemekprzemek3778]

Dude, can I buy this kit in Europe?

[@VagabondMotorsports]

Yes we ship internationally