Yamaha Phazer Drive Belt Removal

#yamaha #snowmobile #yamaharevsyourheart Yamaha Phazer Drive Belt Removal. Other Phazer repair videos: • Yamaha Phazer Steer Ahead
Get the parts I use below:
50/50 ready to use antifreeze: amzn.to/3WKODN6
Yamaha Phazer accessories: amzn.to/3GknETy
Lock and Lube no leak zerk adapter: amzn.to/3xVemZv
Chain case oil: amzn.to/3vnlZ8F
DISCLAIMER: Not liable for anything you attempt after watching one of my videos. Links included in this description might be affiliate links. If you purchase a product or service with the links that I provide I may receive a small commission. There is no additional charge to you! Thank you for supporting my channel so I can continue to provide you with free content!

[@severinw5978]

Awesome straightforward video. Thanks.

[@666dynomax]

thanks for the video

[@666dynomax]

Funny belts at my Yamaha dealer are really good price. My apex has a Carlisle on it. I have to measure all my belts this year and adjust the clutches. So adding washers tightens the secondary as belt wears right? Your videos are great

[@MiloFarms]

On the style of clutch on the Mountain Max and RX-1 the washers tighten the clutch for worn belt. I am not certain but if I recall correctly on the Phazer the washers which are different ind inside the clutch loosen it for newer belt.

[@wideopenriding]

Please do a video on installing a tether on one of these phazers

[@MiloFarms]

Tethers are a great safety feature to have whether it be for boats or any other toy. I have looked around and found several options out there but not yet found an OEM option. Here is a link that shows one way to make it work: ty4stroke.com/threads/my-tether-install.97610/ If I can find an OEM choice I would definitely make a video.

[@wideopenriding]

@@MiloFarms I was doing some work on my phazer and I noticed my secondary clutch was moving in and out is that normal because it looks like it moved a little in your video

[@MiloFarms]

@@wideopenriding Yes that is normal. Yamahas have a floating secondary so they move in and out slightly to help line themselves up. Once they are loaded under power they wont move.

[@wideopenriding]

@@MiloFarms thanks

[@666dynomax]

any chance you know where to get the 1/4 or 1/3 turn hex heads that are on the other side of the machine? I thought they were the same as the 1/4turn snaps on the clutch side but theyre a little deeper and seem to turn a bit further.

[@MiloFarms]

www.yamahasportsplaza.com/oemparts/a/yam/5003c35ff8700212fc841f6d/shroud Check out this link. Yamaha Sports Plaza has them.