Yamaha Receiver Settings Secret Menu - Advanced Menu - 18Gbps 4K Video - Firmware and HDMI
Пікірлер: 59
@mbhooshan Жыл бұрын
Thanks this is what I needed, my Apple TV is now set to Dolby Vision after I set Video Mode to 1. I was kinda planning to buy new AV receiver. Thanks to your video I saved some money!
@theaterdesignco Жыл бұрын
Excellent. Why Yamaha had this in a secret menu is beyond us.
@mbhooshan Жыл бұрын
@@theaterdesignco i think i can guess… the secret menu is like that bcoz if something went wrong like display went off bcoz of non supported resolution or some configuration which is causing system to be unstable. That’s when you can use this secret menu to reset the system. Also this particular case, looks like they don’t want customers to confuse with so menu advance options and then customer suffers if something goes wrong… Advanced menu is for advanced user!
@MendaGur3 жыл бұрын
Thanks.. I were looking for the fm frequency changing.. and it help me
@theaterdesignco3 жыл бұрын
Glad it helped
@fenrirwolf4567 ай бұрын
I have a three floor home and have speakers on all levels, few months ago it only plays on level one.. it’s a Yamaha rx a740 and it is updated. Any help and thank you
@ABEERDWIVEDI16 күн бұрын
I own samsung frame (2020) and a yanaha rx-v583 receiver which supports 4k hdr pass through and i can't figure out how to enable the 4kpass through cause the avr shows video out 1080p but i've enabled the 4k upscaling in the receiver please help
@theaterdesignco14 күн бұрын
I do not know much about that unit.
@amjadali-tv3si8 ай бұрын
Good job. I have rx-585 after upgrading firmware kindly confirm now eARC will work
@theaterdesignco8 ай бұрын
Thank you!!!
@dk60ish6 ай бұрын
Didn't a firmware update address the HDMI mode issue for the RX385 AVR in 2023?
@theaterdesignco6 ай бұрын
Unknown. We do not sell that unit.
@marco94083 жыл бұрын
I had a problem with my yamaha and can't find any video that helps me. It's a model RX-V385 and yesterday i had to connect my laptop on the hdmi and now it doesn't work on my ps4. I tried factory resetting it and it just got worse help pls
@alanrios3795 Жыл бұрын
Thanks for the video tutorial I would never know there was an advanced menu. Can I get some help? My receiver is connected to the TV via HDMI 4k cable, TV displays 4K when 4k content is play , but in my receiver displays 1080, is there a reason why thanks
Thanks for the video, but after getting into the hidden menu it looks like my Yamaha rx-v377 doesn't have those features. Just got a new TCL 55" S535 which uses the ARC option. Just broke out the old optical audio cable I haven't used in 20 years. Unreal.
@theaterdesignco2 жыл бұрын
This is only for the aventage units. Cheers
@Ratchman_50002 жыл бұрын
@@theaterdesignco I actually got it to work after changing hdmi cables!
@drh3rd8 ай бұрын
You happen to get your TCL connected to your Yamaha via eARC to work with Bluetooth... as in BT headphones? I've got everything working except having the TCL audio signal going out thru BT and to headphones.
@n1kkri2 жыл бұрын
Would you know how to use Bluetooth headphones on the RX 679 receiver? thanks
@theaterdesignco2 жыл бұрын
If your receiver has MusicCast you can use the Bluetooth transmit function. You have to us the MusicCast app for that function.
@n1kkri2 жыл бұрын
@@theaterdesignco Thanks, Its my brother receiver and I took on the challenge of trying to figure out what should have been really easy from the receivers menu. I will download the app and try it. Thanks
@genesice81302 жыл бұрын
Any idea why my RX-V6A connected to my TV ARC/eARC to ARC/eARC using fiber HDMI has severe audio dropout no matter what cable I use. I have used a copper high-speed 18Gbps Binary cable and a fiber RuiPro cable both horrible audio drop outs. I swapped to my old RX-A730 and same thing. I think I may be a yamaha issue. Any ideas?
@theaterdesignco2 жыл бұрын
What TVs is it. Check tv setting and look for pcm audio
@nujxad8 ай бұрын
I changed out my hdmi to 4k-8k and tried out 4k mode 1 and 2 but still no 4k pass through. The only time I can get 4k is if I plug the device directly into the tv. Is there anything else I can try? I’m about to throw this Yamaha receiver in the dumpster. Thanks in advance
@theaterdesignco8 ай бұрын
Have you checked the hdmi cable from your source to the Yamaha. Appears your cable to the tv is capable
@nujxad8 ай бұрын
yes i did, i changed out all my cables. I spoke with customer service and they said the receiver needs to be serviced. @@theaterdesignco
@JayGreezy3 жыл бұрын
I just need the Yamaha RX-A780 to use eARC for audio from my TV. Thats literally it, and it just won't do it, and I cannot find a way to enable arc for audio from my television or receiver menus
@theaterdesignco3 жыл бұрын
Hdmi Control needs to be on in the Yamaha, other settings are at the TV menu!
@thechronic67083 жыл бұрын
Hi after resetting my receiver the red standby light no longer goes on, do u know how to fix this please?
@theaterdesignco2 жыл бұрын
Not sure on that one.
@benedictoevangelista29972 жыл бұрын
Check the Network Setting status and HDMI Stand By, I can't remember which one of the two, but one will definitely bring the LED back on stand by.
@mccarthyd66032 жыл бұрын
Any idea how to get PCM off my receiver....just started yesterday and the Cinema Movie settings only play my center speaker....not my L & R....argh😠😢😠😢😠😢
@theaterdesignco2 жыл бұрын
Check your source output.
@guyb70059 ай бұрын
are you using a mic at all?
@theaterdesignco9 ай бұрын
Yes. No issue on our end.
@donestes10468 ай бұрын
N6000A doesn't have a "straight" button.
@theaterdesignco8 ай бұрын
Hello, it think that is a hi-fi receiver which would not have a hidden menu.
@0Metatron2 жыл бұрын
It doesn’t work for me at all, the manual also says to press these buttons simultaneously and it i do that it just won’t turn on
@theaterdesignco2 жыл бұрын
What model do you have?
@0Metatron2 жыл бұрын
RX-V2067
@0Metatron2 жыл бұрын
@@theaterdesignco basically I’m trying to use a new 4K Apple TV and there is no video I plugged the Apple TV into another TV and set it to 720p to try and get it to work but it still wont
@0Metatron2 жыл бұрын
I’m using a 4K HDMI
@0Metatron2 жыл бұрын
Never mind, I found out that the TV’s were using component so it’s never going to work 😂
@Soulcommander3 жыл бұрын
Low volume level....hard to hear.
@theaterdesignco3 жыл бұрын
Thank you. I will adjust
@ShaileshPatel-le8cq3 жыл бұрын
No sound. Very law sound can not hear
@WindomRettes3 жыл бұрын
silent movies?
@drzefkovitsh2 жыл бұрын
ASMR maybe
@Gwaller202 жыл бұрын
Charlie?
@theaterdesignco Жыл бұрын
Who is Charlie?
@daleyhenry2256 Жыл бұрын
Yamaha rxv385 , internal error board different from others , don't know where to solder for jumper, will not ship to Yamaha for fix , expensive to do. And will not buy another Yamaha after this .
@theaterdesignco Жыл бұрын
Always best to buy there aventage line.
@devstev3803 жыл бұрын
Hi the menu does not display on my tv
@theaterdesignco3 жыл бұрын
The hidden menu will not display on all Tv's Front panel for these settings!!
@devstev3803 жыл бұрын
@@theaterdesignco hi ..my yamaha menu does not display on the TV....I press the on screen display on the remote and the button on the AV..but to no avail.