Yamaha Rmax 1000-4 Second Battery Install

[@mariost-jacques7490]

great video great install..love your enthusiasm but if you want to install the OEM yamaha heater thats exactly the location you need to do so...just saying

[@AppalachianMountainRiders]

I’ve herd that from a few others as well so thanks for the heads up! I didn’t know that’s where the heater install but I don’t plan on ever installing one. If I do I guess I’ll just have to move the battery...lol.

[@georgem9554]

Perfect timing, I'm waiting on my true isolator to put my second battery in. Nice fab job on the tray.

[@AppalachianMountainRiders]

Simple but effective!

[@danlux4954]

@@AppalachianMountainRiders use nylock bolts?

[@danlux4954]

What’s the difference between that Lithium Iron and a gel battery?

[@kyleserdar5058]

Harbor Frieght makes a really nice tool for those clips.

[@ArizonaKid]

I carry a battery jumper . But I have thought of adding another battery .

[@AppalachianMountainRiders]

Even with a second battery a compact jumper would still be a good thing to carry. If not for your buggy someone else might need a jump start!

[@ArizonaKid]

@@AppalachianMountainRiders so true

[@garrettrudd5754]

Awesome install video sir!

[@travharrell1713]

Does this isolator have the ability to use the second battery for starting if the primary battery is discharged?

[@ASUSfreak]

(Dutch speaking...) What is the stock battery? A 12V lead of how many Ah and what are the physical dimensions? Why I ask it? 1) can you place a physical (slightly) larger battery with more Ah? Or can you place 2 physical (smaller) ones in parallel into that 1 stock slot? 2) can/may you place the 2nd battery flat (floating 90 degrees) above the stock battery if you build some kind of construction for holding it? Or will it hit the bonnet/hood --> yes that means you have to remove that first to service the main battery, but it's just a tought of me... 3) Is the True Lithium Isolater needed if any of the 2 batteries are a Li one? (I mean, they do not have to be both Li for using that isolator?) 4) Is there room under the passengers seat to place the battery?

[@jonathanlambert5196]

What gauge wire did you use to tie the batteries together?

[@cliffmorrison1130]

How are you supposed to be able to clean the dirt out after a muddy ride with out taking the whole machine apart? Wouldn’t it rust out from leaving the wet mud under there all the time?

[@YtRando69]

So the LI battery is for the accessories? I was thinking of using one of those as a oem replacement battery...

[@michaelhenson5902]

Why not just run the yellow wire from your fuse box to the second battery side of the isolator

[@danlux4954]

Can you put a deep cycle marine battery?

[@AppalachianMountainRiders]

As long as it’s a 12 volt you should be able too.

[@kristopherstrebeck8432]

Where can I get the rpm rmax exhaust

[@AppalachianMountainRiders]

rpmspeedpart.com

[@carlosandrade7439]

It's cheaper to keep a GB40 Noco jumper with yah! My second battery gave up on me for some reason so i stopped trusting it.

[@Bruceschoice]

You can run your bar lights, pod lights on the acc power switch i do on mine and never had any problems. ps ' like your videos keep it up, Bruce McCallister, good old West Virginia.

[@AppalachianMountainRiders]

I’ll be in West Virginia riding Hatfield McCoy in June!

[@Bruceschoice]

@@AppalachianMountainRidersI Invite you here in Braxton county sometime this summer , we have miles and miles of trails here , come up and check us out.